Glazing (mostly) tiny pots - in my home studio in hot springs, arkansas

2D Digital Painting
12 followers
In previous videos, I threw and carved some tiny porcelain pottery. Now it's time to glaze! I used some celadon glazes that are transparent, and work well with the carving, because they settle in the texture. #porcelain #pottery #tinypots #handmade
Glazing my first tiny pot.
So it's
attached
Well, not attached. I'm holding it two points on the bottom and then one point here
And I will have to touch up that rim.
Here we go.
It's so cute!
I'm hoping that the glaze will
Settle into the texture enough that the that the patterns will pop. If they don't I can always use sgraffito
Just put color on the outside and then scrape the patterns away to reveal the white clay underneath or I can try some
some other things.
This glaze, believe it or not, adheres
To this teal color. You can't see it very well. It is a light teal
It's a teal color. This is fired to Cone 6. If I fire it to
Cone 5, it's more of a vibrant teal
But then there's crazing little cracks in the glaze and I'm not looking for that
as a glaze effect.
See how that foot resisted the glaze? That will be really easy to wipe off anything that's left there.
And then I will have to clean up any of the little drips.
But that's glazing!
We use these
glaze tongs
Glaze tongs
to hold on
to the pot with
just a few points on the inside and the outside of the pot. When I touch up any drips
I'll also touch up
those little spots
This is a piece that was glazed in the purple
You can see how it settles into texture
But it also shows any regularities. Can you see the little lighter bit?
That's probably where the glaze tongs were
So, you know, it doesn't bother me
Because again, it's a handmade item
But I have to be really careful to get the any drips
Smoothed off and try to get the glaze as even as possible
There's purple. Let's glaze
Some purple pots. Let's glaze some pots purple, I should say
They start off with this white porcelain
Tongs
See the drip
Where the tong attached at the prong. The prong of the tong. I'll have to smooth that off
Really? Well, I'll have to smooth those off
Or it will really show up in the finished piece
Let's do some baby pots in purple
It's drying where it's darker it's still wet
There I'll smooth off any of those little pinholes and
Fire it and hope for the best
It's firing is like an educated guess. I know what this glaze does, but I haven't done it on these carved tiny pots. So
I'm excited
If you look really closely you can see a few of the tiny pots in the top. So we start the kiln
With the lid open it was propped all the way up here about that much open
There's the red light showing that the kiln is on. This is a manual kiln
I have a computer controlled kiln over here, but it's not working at the moment
but this little
Even heat manual kiln that my dad got me
We saw it in the paper back when you saw things for sale in the paper
Probably in the 80s
It's I've changed the elements in it. I've fixed quite a few things with some help
So it's doing really well
Here is everything that was in that load
Was a small load that's jewelry pieces
That I need to take off the little wires sand the breath bits and attach them to bales today
And then all the little pots
some more mugs
one bowl
Some of the nice
carved ones
The glaze has settled in to the carved patterns in the tiny pots
These came out just as I had envisioned and that's kind of rare in pottery, but I'm very pleased
If you get lost in you're taking this on video you get lost it's gonna be on video
