Royal Enfield Shotgun & Interceptor 650 Customs - by Rough Crafts.

Motor Club
67 followers
9 Video Views·Apr 24, 2026
Record when you want, there's no plan, we'll just see what happens.
Okay, sure.
So we're here at Bikeshed LA, it's the day after the Royal Enfield shotgun launch
and Royal Enfield we're here with a whole bunch of custom bikes,
what they call the legacy bikes made out of Interceptors and GTs and some of the 350s
and also a whole raft of customs made out of the new Shotgun 650.
And we found Winston here from Rough Crafts.
What's up?
And since he's built some stunning bikes in the past and we've known him a very long time,
he's had poster bikes at the show, he's been featured in the London show a lot.
The plan, we don't know what we're going to talk about.
I have no clue.
But what we do know is we have two of Winston's beautiful bikes here.
And hi Winston, nice to have you.
Thank you.
We're huge fans obviously of your stuff, which is why we keep wanting your bikes in our show.
Thank you very much.
And our people are huge fans too, which is why they commissioned me to build bikes.
Yeah.
So let's just talk about what we've got here.
Okay.
Well, we have the Midas Royale and the Shotgun 650,
which is basically totally different of what I'm used to.
Well, these two are totally different by itself already.
So this one was done 2018, I believe, like five years ago.
It was a full blown, full build, basically whatever you want kind of build
with their Fundamental GT or Inceptor, I don't even remember.
They're kind of the same bike.
Yeah, they're kind of the same.
Different tank, different headstock, but otherwise the same bike.
So yeah, the basic is I want to build a couple of racers out of it.
I'm trying.
Yeah.
I want to build a couple of racers with a kind of an endurance racer kind of line,
but I want to tweak the proportion.
So you still have that fairing with the top half fairing kind of look,
but I don't want to be the big, big fairing.
So I want the small front and a small tail kind of proportion.
The way to achieve that is I've made the fairing as a two-piece.
So this is actually just like winds extended from the tank.
And if you look from the side, it actually looks like a connected piece,
but it's actually not.
So it turns around.
So you don't have the clearance issue that make me able to do this super small fairing
with this similar line, just a different proportion.
And because when they designed this engine, they focused a lot on this crankcase.
The shape is just so beautiful.
I want to emphasize that.
So with this extended wind that covers a lot of the top,
so I make that also the exhaust pipe.
It's really sweeping line that also kind of makes this,
like frame this crankcase into such a beautiful.
And that's a difficult thing to do.
I mean, you know, you have to sort of cut, how many sections was it?
Four or five sections with slightly different radiuses
to get the whole thing to come together.
Because you want it to look like a one piece, like smooth line,
but you cannot because it's not the perfect world.
So I actually bent two different radius tubes and cut.
I think each tube got five different sections and I welded and smooth it.
So it looks like one piece, but it actually goes all different ways.
Especially the one from the left.
It's very difficult to make, but it turns out quite well.
I'm super pleased.
And then all my good friends from Behringer, Ohlins, BST, Ferrari,
CNS Racing all got.
SC Project you often work with as well.
Oh, yeah, yeah.
Sorry about that.
Well, you know, I'm just looking up these places.
Thank you.
Yeah.
So they always support what I do.
And then when I heard about this project with Royal Enfield,
they all jumped in and helped out.
And well, of course, there's a super custom one-off swingarm.
It's all aluminum.
I think it was four or five centimeters longer than stock.
So it gives a little bigger proportion to the whole bike.
So for me to ride it more like it's my bike.
Yeah, it's a little too small for my size.
But yeah, it is.
It turns out really well.
It's been around the world several times.
Yeah, it's been even till this year.
April is still in Japan for Nagoya show.
Last year it was the riding show for Hong Ai's Yokohama show,
which is super proud for me.
I'm a proud dad.
And you rode it in.
Yeah.
I'm a proud dad.
So no pressure riding that bike in.
I mean, the thing we had this bike for almost two years of bike share.
And it was one of the most loved bikes we had on display.
And we got it.
I guess we got it just before COVID.
Yeah.
And then obviously, you know, COVID happened.
So the bike was with us for a long time and it became part of the furniture.
But every single person in the bike share absolutely loved this bike.
And I think for me, you know, we've been following you and your work for a long time.
But there's definitely a rough craft Winston look and feel.
Now, I know what I think it is.
And I want to sort of get your take on it, obviously.
But to me, the first thing is, you're clearly a designer.
I mean, a lot of custom builders are builders.
They're makers and assemblers of parts.
And what they don't often have is what the OEMs have,
is the ability to step back and look at an overall package from every angle.
And look at how it flows from the top, the bottom, the sides, the back, the front.
And see it as a complete piece.
And especially as you're building on other people's platforms.
But for me, the first thing for me, for a signature build for you,
is you do have that overall sense of design and shape and proportion.
And you know, and if you've got a small front end, you've got a small back end.
This is just going to keep moving, isn't it?
We'll just keep fighting it.
Winston was like, no, the bikes have to be with the handlebars this way to look better.
But you know, we all commented, in fact, I'm not going to mess with this,
about how the fairing does move in and blends perfectly into this kind of
this shroud piece here that sits over the top of the cylinders.
And the way all the lines just kind of join up.
And it very much looks like an OEM design.
This is the way an OEM would work.
That is actually one of my philosophies.
Every bike I build, I always want to finish to look so complete,
so balanced that everybody looking at it will say,
oh, could have been from a manufacturer.
You know, that is like the biggest compliment for me.
If someone comes over and says, oh, that exhaust is so cool.
I'm like, oh, maybe I failed, you know, because I'm not balanced enough.
Then you will focus on individual parts.
And for me, it's not a very good result.
Yeah, it's got to look like it was properly made.
And also, that gives you the trust, especially if you ride a custom bike.
You kind of feel as though everything's been thought out.
And, you know, it's also about knowing the bike's going to work.
It's going to ride.
It's not just a bunch of components thrown together.
But then the other two things about your builds are exactly not that.
And, you know, one of them is your beautiful finishes.
You know, you work so beautifully with carbon fiber,
with these pinstripe gold leaf next to pinstripe silver.
And, you know, this almost kind of it's like an electric guitar,
like a sunburst electric guitar from Gibson,
where you've got the black fading in to reveal the weed with these beautiful pinstripes.
And that's very much a signature look for you.
I mean, how did that come about?
Because most of your bikes feature gold or silver pinstripes.
And black.
You allow the carbon to show.
You mix matte black with gloss black.
It's very much your signatures in terms of colors.
I think for me, the black is just the simplest way of showing the line of the bike.
But at the same time, you still want to emphasize the line without overpowering it.
So I always think that if you have a very well designed lines,
you don't need paint to help it.
But so all my paint is just enhance it a little bit, slightly.
So like, for example, everybody thinks I like carbon fiber.
But honestly, it's just a different kind of black.
It's just a different kind of black.
So I like different weave of carbon fiber.
I use the regular weave on this one.
But I use forged carbon.
I use 4K, 12K, all different carbon fiber just to have a different depth.
Like also the shading, this gradient black, just give it the extra, extra depth.
Just like this smaller line, the thinner line here.
Like so many people didn't even notice before they see the actual bike.
Yeah, it's beautiful.
But when you see it from far, it looks like a very simple all black.
This was one stripe.
But when you get up close, you get more look.
You got more time.
I always get the comments like, oh, I just stand in front of the bike for 15 minutes.
I keep finding new detail.
And I love that, you know.
It is about detail.
I mean, the way the seat's been sort of pre-patterned, beautifully stitched.
It's not some sort of standard tuck and roll.
It's not just a diamond stitch.
It's a geometric pattern that, you know, complements the whole of the bike.
I mean, it is all of these little details that for me kind of also mark out your work,
which is the kind of thing an OEM car ought to be.
But then the other thing for me is beautiful badging and fine quality components.
I mean, you know, your whole kind of brand and ethos manages to be kind of really old
school and really contemporary all at the same time.
Well, that's also part of, I think, Rodcraft's signature is I love to blend, like, really
retro vibe and retro lines and retro elements.
But I want to finish it in a really modern way.
Like, I love the cutting edge stuff.
I love all the, like, Odin's carbon fiber PST wheels.
All the cutting edge stuff are super cool.
But you always, people tend to get attracted to those vintage lines because they're just
so beautiful.
They're so timeless.
So I always ask myself, how can I blend those together to create something that is timeless
from 2023, you know?
That's something, like, I push myself for every build and I think it's been working
out so far.
Well, I mean, this is honestly one of my favorite custom motorcycles.
I say that quite often because I've been very privileged to have some beautiful custom motorcycles
around me.
And, you know, we've had some beautiful bikes from Max Hazan, from Ian Berry at Falcon.
We've had some stunning bikes.
And this is definitely up there with those builds for me.
And we've been very privileged to have it.
And I love the fact that it's built on the Royal Enfield platform because this sort of
650 twin cylinder engine is so, again, timeless.
It is.
And it's sometimes timeless design is what we all love.
We're seeking heritage and meaning and storytelling.
And there's something about the way bikes were designed and drawn and made and cars
as well, kind of back in the day.
And I think we all love those organic lines that are almost from nature in a weird way.
They're almost like, I mean, a lot of your bikes have that kind of brutish, ready to
pounce, like some kind of panther or a bulldog ready to go.
And some of the best motorcycles, some of the best vehicles look as though they're
about to pounce.
You know, they design cars to look like they're eating a front wheel.
I always like race stuff, you know, anything that is designed for just a single goal to
go fast, have some meaning in the design.
And I always took inspiration from any kind of racing, even though I'm not a race engineer,
I always admire those.
Even the modern MotoGP bike, when you look at it, it's like, wow, I don't understand
anything, but it looks so awesome.
You just want it.
I love the wings and the fins.
They remind me of a samurai charging into battle with all the stuff.
Yeah, but everything has a purpose there.
And then it has its own aesthetic built into it, which for me, everything is just inspiring.
Just look at it.
And then I try to put a little of everything into my build.
So maybe you'll see my next build got some wind net on it.
Why not?
Let's talk about this next build, because this is a very different proposition.
So to launch the Shotgun 650, you know, in Royal Enfield's brand new platform, what they
did was they sent out a bunch of body parts to a whole bunch of builders, and they didn't
even send the bike.
And, you know, we were kind of commenting that, you know, normally that's what custom
builders throw away.
It's the side panels and they change the tank and they change the fenders and the lights
and everything.
But you literally, as most of you would have seen on Instagram, you guys got a crate full
of parts and you've got the fenders, you've got the side panels, you've got the tanks,
you've got the yokes, you've got the headlight cowl, and you've got the front fender.
And that was pretty much it, wasn't it?
Yeah, basically, yes.
And for me, honestly, it's definitely not what I'm used to.
And when I get it, it's like, what am I going to do with it?
What can I do with it?
Like what I cannot do with it.
That's the biggest problem, because, you know, it's going to be bolt on back to the bike,
which you don't even know what the bike looks like.
And you don't even know which fit what, this and that.
If you do this, will it still fit?
So that's a big question.
And also the time is really short.
How long did you have?
I think I got three weeks.
Wow, three weeks.
That's crazy.
So it's a quick, quick decision.
Okay, I can do this, I can do that and still keep it very rough wrapped.
What can I do within three weeks?
So it looks rough wrapped within three weeks, within this limitation.
And this is what I got.
Well, you're the only person who actually really, out of all the builders,
one of the very few people, I should say, who actually chopped into it.
I mean, you cut down the rear fender, you made a beautiful line here
without knowing where it was going to sit on the rear axle.
So you had to kind of be sure that that proportion was right.
And again, it's got all of your trademarks.
Matte black beside gloss black with this beautiful, is that silver leaf?
That's silver leaf.
And is it kind of finished afterwards?
Yeah, well, engine turning.
Engine turning.
I love that effect.
I mean, that's so beautiful with like this.
And also the fact that I know this tank and fender is bigger than my usual ones.
So that's why I did this wind design.
So it makes the line a little thicker to accommodate the size of the tank.
It's very art deco, I always think.
But also, like I said, if you look at it from far, it's still a simple line.
But when you look closer, oh, there's actually like a wing,
like a feather kind of design into it.
So it's still...
And you also scalloped the tank, which is beautiful.
And I've watched most of the videos now from most of the builders.
Can you remind me how you did that?
Basically, you look at the line and then you look at how the light reflects.
And then I decide like where I should cut it.
So it's actually cut in two pieces.
And when I cut it out, I will cut another steel strip.
And then I will that steel strip to the piece that was cut out.
So it's like this piece, it got...
It's like a step.
Like a sidewall around it.
Right, yeah.
And then you got enough meat there and you're putting in like,
okay, you want it, how much insert you want it.
And then you weld it back, you cut off the rest of it.
That's basically what it is.
But what you've achieved is, again, beautiful.
And Lisa, if you head back a little bit and look at the whole of the side of the bike,
you know, you've got this beautiful relationship between a side panel
where you didn't know exactly where it was going to go on the bike
with this beautiful line here, which kind of shrinks a really bulbous part,
made that smaller.
Yeah, that's the goal.
Joins up to the tank and the whole thing looks like
this could have been a Royal Enfield OEM design.
It could have been a paint job.
Originally, I want to scale up the side panel too,
but it's always like a lot of stuff inside.
Yeah, you don't know what's behind it.
Yeah, so I don't know what's behind it.
So if I cut it inside, maybe it won't fit.
So I can't do that.
But on the tank, yes.
Yeah, I did that with the Triumph.
I actually cut extra holes into it and then you can see things you shouldn't see.
And I lost one of the lugs.
So yeah, I've learned that lesson the hard way.
So yeah, it works out.
And you notice that I try to do this line to make it smaller.
Yeah, because you want to shrink this bulbous piece.
I mean, one of the reasons for scalloping things is to take away bulk.
Yeah, and also I think the common mistake that people think is when you scallop the tank,
you want to do like a really big scallop.
But I don't.
I think it needs to be subtle.
Like something you don't really look at it.
But when you're up close, then you notice the beauty of it.
Yeah, it's a lovely shape.
I mean, it's really enhanced and added to the tank.
And it's kept the kind of the overall character of the bike.
But it's just added.
It's almost like added a bit of musculature that wasn't there before.
And also like, even just like how much depth here, how much depth here, how much depth here.
It's all different.
And every bike is different.
Every bike I just look at is like, oh, you probably need a little more here.
And probably a little less here.
It's something that I don't know.
I don't even know how to explain how I decided it.
But it's all different.
Are you a perfectionist?
I am.
Is that a challenge?
I am.
For you and the team and everyone working with you and stuff.
It's like, I need another millimeter at the back.
Yeah, I'm always fighting for just like five mil kind of stuff.
And then.
I mean, it's worth it.
My silversmith to a normal site.
He's just amazing.
Like anytime I just throw him like a rough idea.
Okay, I need my logo with Royal Enfield logo in it.
And with that extra ribbon saying Royal Enfield underneath.
And he'll make that.
So he's your guy.
And he's a jeweler.
Yeah, he makes like rings and all that stuff.
I mean, I've seen some of the bespoke stuff you've done for your clients.
And the work is incredible.
And it's always you.
It's always rough half.
I mean, you've done some designs where they're slightly different on each side.
And there's a lot of work that goes into this branding.
Yeah.
And I think that's so important that I think many builders actually
didn't have that, which is a pity.
Like I know many builders do really amazing stuff.
But if you don't have a consistent element in all your builds,
you lose the opportunity of branding.
That's, I think that's very, that's very much a pity,
especially when you do a really good job with your build.
Then you lose the, how do you say that?
Cognizantness?
Yeah, well, you're telling a story with every build and every design.
And the thing for me was when all of these bikes rolled off,
and we're surrounded by bikes right now.
We all knew which one was yours the minute it rolled off the rack.
It was like, there's Winston's bike.
Even if I take out the emblem, you will see that's mine.
I didn't see that first.
I saw everything else.
And then the front end, you know, that was just about, again,
you've kind of minimized this cowl with the matte against gloss.
You've done this beautiful kind of graduated stripe.
I want to customize that.
But honestly, I have no idea how it's going to fit.
So I can only paint that.
But also the front fender and rear fender all chopped short.
Yeah.
Just to make it tighter.
Yeah, it looks great.
It does look better.
I mean, we all love chopping down the fender.
But you know, getting that right when you can't even see the bike.
Yeah, that's very scary.
Yeah.
So now that you've done this, and it's been bolted onto the bike,
and it's got a lot of the original kind of stuff on there that you wouldn't be keeping.
If you now got this bike back and Royal Enfield said, right, well, now finish the job.
Give me a rough idea.
What are you now going to do?
Because you talked a lot about the rear shock.
That would be totally different, actually.
And I'm waiting for that call from Royal Enfield.
I'm going to do a lot different, a lot more than this one.
Because the Shotgun 650 got this very signature frame loop here.
I think it dominates the look a lot.
And some people like it.
Some people don't.
But with me, I always want to celebrate what the manufacturer is trying to do.
Yeah, I never want to get away from it.
So I'm thinking, like, what can I do with that to make it like an even bigger feature
of the whole bike?
So how can I make the line flow?
How can I make the other part flow with it?
That's my biggest challenge, if I get that call.
But I love the way your brain works.
Because when we were talking about the bike the other day, you said, well, I was thinking
that if we mounted the shock here, it carries on this line.
And then you'd extend the swing arm.
So the shock runs that way.
But then, obviously, you don't want to make the bike out of proportion.
And then it was funny, because I mentioned that to Adrian Sellers.
I think it was Adrian or maybe it was Mark.
I can't remember.
And they're like, yeah, that's a good point to mount it from.
It's strong enough.
That would work.
And obviously, there are quite a few bikes out there that have an almost sort of flat
or transverse rear shock on there.
So you're going to find some sort of spring that would work.
So I thought it was just interesting seeing how your mind works.
You're looking for lines.
You're looking for flow.
And also, I think, at the same time, I think the celebrating manufacturer design is something
I always keep in mind, no matter what I'm building.
And that's probably the other reason why manufacturers like me.
I've been privileged to work with so many different brands.
They all love what I do, because I think I even talk to the designer even before I start
designing.
I try to understand.
So this is their goal.
This is the target they're trying to tell the story to.
And so how is my build going to help them tell the story even better or push this story
a little, like, one step or even two steps further?
That is something that always interests me and also very fulfilling if I actually achieve
that.
So with that bike, I think it works pretty well.
So if I get to build this one, we'll see how it goes.
Well, I think the great thing is, is the manufacturers of the street.
They're dealing with homologation across all these countries.
They're dealing with compliance and, you know, Euro 6 or whatever the toughest, the
lowest, toughest, or highest common denominator of standards for the whole world, because
it's not a big enough industry to make every different bike for a different market.
And so they're limited.
And then they have a budget.
They're working to, the marketing department would have said, this bike has to be this
price, X thousand dollars, pounds, whatever.
You can only make it from that price.
Yeah.
So all of a sudden you're compromising and compromising and compromising.
And I think, you know, speaking to some of the manufacturers and getting to understand
what they want to get out of these custom programs is they're kind of going, well,
you can do the things we can't.
Yeah.
Or the things that wouldn't be strictly compliant.
I actually heard that.
Yeah.
This is why we can't do it, but maybe you can.
Yeah.
I mean, we, we've had that conversation a lot with, with manufacturers who've said,
well, if we give a bike and you customize it, then, you know, we've separated ourselves
from that liability.
And it's terrible that we live in a world of legal liability and compliance, but we
do.
And this is a great escape from that.
But, you know, Winston, fantastic to have you here as always.
Thank you.
We love hanging out with you and seeing your amazing work.
It's my first time in Bike Shed LA and it's amazing.
Congratulations.
Thank you.
It's a good spot.
We like it too, but it's even better with your bikes in it.
So we're going to hang on to this one for a while.
So if anybody wants to come and see this bike here at the Bike Shed, I've been told we can
keep it for a while.
And I'm trying to keep at least one of the custom shotguns.
And I did say, could it be yours?
So if they'll let me have this, then we'll have both of your bikes here.
And obviously we have some other amazing bikes here from some fantastic builders.
But, you know, it feels like you're kind of in our family.
So if we can have both your bikes here, that'll make me very happy.
That's lovely.
Anyway, cheers, dude.
Thank you very much.
And come and check out the bikes here.
This one's definitely going to be here for a while.
This one might be here for a little while.
So come and take a look.
