Making a 1830s mantle

Pre-modern Women's Fashion
183 followers
9 Video Views·Apr 24, 2026
Hello everybody, Isabella from PryoTie today and a different video on making an 1830s cape or
mantlet which was spurred by the acquisition of these antique pieces and these are already shaped
like capes of a mantlet or pelerine and multi-caped pelerines, mantles, mantlets,
cloaks were very much a thing in the 30s and 20s for not only men but women as well and obviously
women went for the more ornate option. So that is a stunning bit and I've got two of them,
a smaller cape and a bigger cape but since I need it a little bit more to, I mean I could just make
double cape and that would be fine and admittedly you can make the capes detachable from the main
cloak so you can wear just the cape which is something I'm tempted to do as well to be honest
but I also thought if I could have a bit more so that it goes all the way around and on the
bottom of the main cloak that would make it quite fitting. So I had one of these pieces sent over
to India, I'm not very good embroiderers at all, I can just about manage with some bits
as you've seen in the past but this is quite a lot of work and I'll tag the chap here
as well, met him from Instagram account and his workshop sort of did quite a decent job of
replicating the pattern on. Unfortunately we didn't have the same fabric, this was a very very fine
silk captain of wires, we didn't have the same fabric so he just used some silk velvet, very
similar so I'm happy with that as you can see the original and the antique. So I've got quite a lot
of now, it took some time, I was supposed to be finished for my Regency and Romantic book
to include the pattern there but I didn't manage to. So there we go, I have quite a lot of that so
hopefully there will just be enough, I think I've got five meters, so it should just be enough
to cover the full length and the back. Now the capes at that time could have additional colour
as well and I think the one that has several capes has that. I'm using this book as my inspiration,
Workman's Guide and that's 38 edition so a little bit later by bedtime but there's a good
description of different capes and clothing and stuff like that, I mean it's a very useful book
to have to be honest. The disadvantage is all the measurements are in breaths and nails
which is a little bit different to what we use at the moment so a breath of fabric really depends
on what kind of fabric it was. So they say a breath of silica, a breath of wood because there
were set breaths, that's the breath of fabric where available nowadays. We have breaths like
150 centimetres or 59, 58 inches or we can have 110 centimetres or 137 centimetres,
it really differs. So here I'm not sure what she meant by breath. Traditionally
a breath would be either 24 inches which is about 61 centimetres and that would most likely be
more expensive out of fabrics like silks or velvet, some printed wools for example
and possibly some wools as well and another breath that I managed to find out is 36 inches which is
about 90 centimetres or 34, 36 I think or 32, I have to check. So that is a little bit more and
that would commonly be linen and cotton and sort of linings and undergarments fabrics.
So trying to sort of decide what breath is used here is going to be one of the first problems.
I'm using this beautiful wool satin as the main fabric as it will go very, very nicely
with that and lined with this very, very light silk so keeping to the very autumnal and earthy
colour. It's not really my choice of colours traditionally to be honest, I prefer brighter
colours and cooler colours but this will work quite nicely I think with one of my dresses.
So yes I'm trying to film bits and pieces and put some photos so you can have a look.
I will probably be still stitching, it's for the event next week in Scotland that we usually
run for 1830 sort of house day but I'll be still stitching on a car.
I've put aside three weeks to prepare new stuff for the event. I've got loads of my own
so it's nothing really urgent but I wanted to get something new for myself but as it turned out
I spent those three weeks quite slowly going through other people's dresses and coats and
frock coats and trousers and capes and waistcoats. So now I have two days to get myself a possibly
new dress and this cape. I've recently injured my back so it's a slow work but at least this one
I can actually do some stitching on the way there or in there and see if I can finish it up.
So let's be about it I suppose. I have cut out the two capes now which was relatively easy to do
because you just lay them flat and follow the curves but obviously both capes would in the
past be pieced. My fabric is 150 centimetres so it's about 16 inches wide and although the
top peleric or cape went on it without any problems with a little bit of despair
the bottom one had to be pieced just a little bit. So obviously in the past with much narrow
breadth it will be pieced out of several pieces so that one is done now. So the next bit is going to
be trying to get the fabric and I'm really tempted because that silk is provided by
Satbury silk mills and they've been operating since 18th century.
So many of their silks are narrow breadth so let us have a look how wide this one is.
This one is about a metre so four inches so I think for all purposes I'm going to use that one
as my breadth. I'm just lazy I suppose it's much easier to piece this one up
when it's a metre rather than cutting the smaller bigger pieces.
And obviously the top cape will have to be the main cape will have to be pieced as well.
If it was made in a fabric with no nap and this satin obviously has, well not the nap,
it has a directional flow. It has to be cut in one direction otherwise the difference
in the orientation will tell. Let us have a look to show how to do it.
This one is straight and this one is across so you can see more or less that you would
you would be able to see the joints because they will reflect the lights much differently.
Let me just grab it so you can you can really see the difference in sheen
and that is one of the most common mistakes nowadays.
Having said that in the past sometimes you did not have enough fabric so you make do with what
you had and then if some fabric had to be cut at a different angle then you know so be it.
It was not on the for show it was a functional garment but here I think I have just enough to
to make it properly so that the grain goes in the same directions on all the pieces as necessary.
So I'll think the lining for the capes first and then I'll need to decide whether to make both of
them into one mantlet or just one of them that detaches. I'll have a think of that in the
meantime let's cut the lining. So it is a meter wide and I need it about 55 inches long to cover.
Theoretically according to the book it should be from the shoulder to the top of the boot
or edge of the dress. Obviously that will depend on the dress you are wearing
and obviously you will have your dress being sticking out a little bit because it's on
corded petticoat. But I think three meters might just be enough for the main
cape. I probably will do four and have a nice big facing. Now you don't traditionally lots of
capes long capes and short ones were just cut from either semi-circle or a circle and a quarter
sorry three quarters or a full circle depending how much fabric you had and what was the use of
it. I think there are several patterns for that in the equestrian dressmaker book for medieval
cloaks and later ones as well. Now in the 20s and 30s quite a lot of capes were gathered actually
even earlier than regency as well are gathered or carpet pleated to a narrow stand or narrow band
mostly because you can get much more volume. Otherwise the circular collars tend to be really
tight around the shoulder, well tight just shaping you're falling down from the shoulder which is
fine. However if you have the big sleeves in the 30s that is not going to sit very well at all.
You will either end up riding up and giving you a sort of nice well not so nice over collar
or being too tight and not being able to do it up. So you do need much more
much more volume of the fabric hence the gathering and that affected both men's and
not as padded as women's the sleeves were still pleated and you still have quite a lot of volume
there. So it made much more sense to have more volume and nice little slots in them
in a cloak for your for your arms and that's it. So I am deciding that four meters should
just be enough to cartridge pleat to the band. This one is a really nice silk little sail
it's French word not not a disaster or damage it's very much like grosgrain but much much finer
ribbed silk and the ribbed silk contrary to expectations also ripped very nice across.
So I just marked the length that I need making sure that it's enough for seam allowances
and I'm going to rip it. This gives me a perfect straight edge without
any problems. You can't really do it on a diagonal weave fabric so things like cotton
drill it will not rip very very evenly it will be uneven but on the straight weave ones no
problems at all and you basically use this piece which is my tape to mark the next one
and you can repeat this again and again and again as much as you need it every single time having
an exact straight edge which really really helps later on. So I'm going to get on ripping it is
very satisfying stressful. Some fabrics tend to have a lot a lot of small threads shedding
this one doesn't have a lot plus it will be put together in a second so not much of a
problem. At the same time you notice that I'm using the selvedges which is the finished edge
of the fabric which obviously doesn't fray. Using selvedges was very popular in the past
it basically means you need to do less work because you don't have to secure that seam
additionally you don't have to fell it you don't have to whip it it will just stay.
I'm going to mark several lengths at the same time and rip it all in one go.
So the selvedge is a little godsend especially in the era where there are no sewing machines
and all you have is your own hands and needle and thread. So having to whip a seam allowance
additionally would mean another few hours of work so that using that means it's
economizing on time. I think I have enough of that silk yes should have checked first but
I gambled I think that's my last breath breath not breath I'm still breathing all right
somewhere here there's a cut yeah there it is
so I'm going to stitch it all up and then I'm going to cut the main cape out of my wool satin
and possibly piece it all up as well so let's get sewing. Well I must say I'm very very grateful
for sewing machines because that thing just putting those four breaths together so three
seams just took like five minutes in the past hand stitching them and even though they don't
have to be very tightly and very tightly stitched because it's just a lining it doesn't bear much
weight if any it would still take at least half a day or several hours so yeah I'm very lucky to
have these I'm going to press the seams open now and start cutting on the main fabric I must say
four meters look a lot so I will have a look how it looks gathered and do I need to trim it a little
bit more at the front and at the front or or not but it's quite a lot it also depends how much of
the trim I have because it has to go down on both sides and that's a meter and a half in each and
then additional actually I'm going to measure that excuse the absolute chaos happening here
it's also quite dark because we have a bit of a storm at the moment coming on Exmoor
but I don't really want to put the light for filming at least for this one I might
swap the stands in a second because the light flickers here a lot right let's see how much we
have that's the bottom edge well I have enough which is great and I have some left so I might
use the I know I don't have a little bit left which has this so possibly in the collar but
that means I can stick with that that width and hopefully it's going to be okay okay update
um I've cut out now all the pieces apart from collar and the band and I've cut the fabric the
main cape it's just not enough for the four meter breadth um I could possibly piece it quite a lot
but then I've got another idea what I can do with the rest of it and then I wouldn't have much
left for either band or a collar so um I've got three and a half breadth
and so I need to trim the lining which I'll do in a sec um I've cut out the
main capes I've cut out the linings for the capes as well and they are quite heavily
pieced well not heavily really the bottom one is three pieces the other one is two pieces so you
have just sort of corners being pieced um and the next step is going to be applying
the embroidery trims um now there are a lot of ways to line in a tri-trim you can
line the capes first and then you stitch the trim on all by hand of course otherwise you will have
quite ugly seams on the underside and if it flares up it will show um we don't want that
but what we can do I can just apply the lower the how to do it just try to show you
so we want it to sit here so basically all I need to do is to get these
seams together so once it's stitched it will form a nice edge so I can do on the machine
saving me quite a lot of time which I probably would um and then just hand stitch the top bit
and then line it so that the lining will cover any kind of stitches that are on the fabric
underneath so that's a lot of hand stitching but hey less than it would be otherwise um
as for my little brain wave um there is a mention in a book on some other cloaks
that I mean this is such an amazing resource that you have the slits for your arms to put through
to have a muff or whatever to move around because otherwise just flapping like a big bat which is
quite difficult when you have so much weight on your shoulders um but you can have detachable
of stitched on the sleeves just stitch to the slits so that's obviously for much cooler weather
or when you're just wearing possibly a lighter gown underneath so that's something I might just
have enough um enough stuff to do and possibly just have a little bit of trim left just to put
it on the cuff so that will make a nice um variation one thing I haven't mentioned and
the capes could be made in various various fabrics I mean just they are
mentioning let me have a look okay that's woman's bonnets
cloaks there you go cloaks maybe are made of satin silk cloth merino shawling both the real
and imitation scotch plate orleans are common stuffs worse than I think the choice of materials
is of course influenced by the purpose by which the cloak is intended to be used for instance
carriage or traveling cloaks are plain and of a thicker substance and have less work in them than
those used for walking in so it all really dependent on what you're using it and you do
have waxed cottons later on being introduced as waterproofs and I think they could have
been in 30s already I'm not so sure but if you are using good quality wool you would be using
super fine and broad cloth um or melton for waterproofing um just very very densely woven
wool has lots of lanolin is basically waterproof however it will be heavy so whether you have one
but not lined possible she did mention most of them are being lined um she said about trimming
you can be trimmed with occasionally lined with there also so that would be
really heavy duty cape or they can be made perfectly plain as a silk cloak is at all
times that cost the article of dress and with care may last a long time it is worthwhile to
have the silk a very good one and that's something that nowadays we would should really learn from
buy better quality stuff so that the last and not a t-shirt that's going to fall apart after
a couple of months um so i'm very much um in agreement with that mentality and the
satin silk and fine merino cloaks should be lined with sarsnet either the same color or some well
chosen contrast um but and that's another interesting bit as the sarsnet linings cost
a great deal for a full-sized cloak two old silk gowns nicely picked to pieces or either
wash the dyed would be a good substitute where economy is an object when this is done it is a
good plan to turn a deep hem of outside silk over the edge on each side of the front um all but
as said to let the two front breaths of the lining ought to be of a new silk so the things that will
be seen so as i mentioned edges of capes or edges of front where you can actually see a little bit
of lining use the good stuff the rest just use whatever stuff you have available that you're
not using anymore why pay a lot of money and it would be quite a lot of money then
to get something that will very rarely if ever be seen um and another thing for winter cloaks
could be padded or wadded basically interlined with wadding i'm going to sneeze now a second
excuse me i'll talk of it just allergy to dust um where was i okay um so they can be
additionally interlined with wedding and they can be um likely quilted to the lining
not to the wall of silk or whatever some uh on the top so that it doesn't show the quilted
unless you flap it out but that again will make for a very heavy um article but a very warm one
and so again depends on what climate you live in um if you are in finland then absolutely go for it
uh in england probably not really needed even in scotland i think in october we would be just fine
because we don't really have a lot of extreme temperatures there especially nowadays obviously
a little bit different um well 150 years ago so we'll see so silk cloaks absolutely and i was
considering silk as well but i wanted my character before walking out in the possibly wet weather
hence wool and wool satin um is nicely woven quite thick i don't think it's going to be as
waterproof as um as superfine but it was definitely cheaper and i don't think it
would be too cold to warrant any kind of wedding being placed underneath and i don't have time for
that that's another consideration so i think a cloak and two capes it's going to be more than
enough if i need more than if i need more i'll have my fair capelet so i think it should be fine
and the very light silk lining will add a little bit of warmth without adding a lot to the weight
so all of these are considerations that people would be taking in the past about
about their clothing but as we can see the practicality durability and economy
have always been the issue to some extent or another right so all i'm going to do now i'm
going to try and get one of those capes um trimmed in those bands and see how it goes
they're already obviously because they were taken from original garment they're already pre-pressed
so this is my stitching line nice and easy and it's really amazing to be working out
you can see when they were a little bit too tight so they had to notch it to follow the curve better
and to stretch a bit more it's really amazing to be working with old fabrics like this one
there's a little bit of a repair here but equally amazing to be able to give them another chance
to shine really this one here is interestingly stitched still stitched up so i'll have to
undo that um so yes i mean you cannot really give it to any museum that's why i got it from
an antique sales but you can incorporate it with into um new made outfits and i think that
cloak is going to serve me for quite some time so yes as you can see i managed to get a little
bit light a different stand so that's a bit better so i'm going to get all moving i will spare you
the slow-mo of sewing it's quite tedious i will get a few time lapses just to show that i actually
have done it i've been accused once of not doing it just using sweatshops this is my sweatshop
size of a garage with a space for one person never mind let's try and do it so i've put oh there's a
sorry i've put the trim onto one of the capes so it's all stitched up so next bit is going to be
pressing the seam allowances open then flipping it all up and pressing them again and then pinning
and hand stitching it now for pressing i thought i'll give you a bit a little bit of a
preview of the tools i'm using so this is custom made anvil i think you can get
standard that's that's a standard sort of anvil and a clapper for tailoring
which is good for modern stuff what i wanted to have is one with much much thinner
breath here and tapering peak i think mostly because it goes much better
into rounded corners not straight angles but this is a rounded edge so it's much easier
to open it here and here due to the tapering so it just follows the curve
so that's um when i had made this poke and another one is the half moon
which is perfect when you have curves for pressing curves much much easier than trying to
fight with any anything else so these are relatively simple tools
and most of the carpenters would be easy to replicate them quite nicely i do have a mini
one as well but a tiny that's something that was made as a joke but it's actually quite useful
not here so anyway so those are the tools i'll be using mostly for pressing the caves of that
cloak so let's do it the trim is on and it's pressed flipped out it's basically like putting
but to the outside instead of inside so now it needs to be hand stitched all along here
theoretically could be done by a machine a couple of holes in it so i have to push them out
um yeah could be done by a machine just going at the very very edge of it and i might be tempted
to go to the second cape i'll see how am i with time um so yeah i'm going to do the second one
and then the main cape that will be quite a lot of work and it will be a little bit more difficult
mostly because the originals are already cut to cut to the shape which means the fronts are on
the straight grain whereas the edge that curls it's on the bias so that helps a little bit
my main strip is all straight grain which is another reason why i decided to go for
straight breaths of fabric it's much easier to do it on a straight grain what preserving the
the volume of the volume rather than on a semi-circular cape or circular cape when you have
a lot of bias trying to put a straight trim on a bias thing it's going to be a lot of darting
and obviously darting will affect the embroidery so that's another consideration so um
let's be about it i suppose right after lunch update so i have two capes ready
and i did a bit of an experiment that this is a top cape as you can see the short one
it's quite nice and this one i stitched the edges by hand look a bit that looks nice and neat so
that's the top one the bottom one i decided to stitch by machine because i could and because
bottom one and this is stitched on the machine which you can't actually really see unless you
look very very very closely and obviously see on the other side these are going to be
lined in silk theoretically they don't have to because it's already a nice
finish on the other side so i'm i'm pondering and it's quite heavy as it is so we'll see
i've also made some changes to the design um originally i planned to insert the capes
um and whole cable um and whole cape onto a band just like lots of gentleman's cloaks were
and very often some gentleman's cloak we just gather directly to their big collar um so here
i've got a collar cut out and lined but also realized that gentleman's cloaks that the band
was just enough to sort of to sit over the slightly wider shoulders and usually they
were really sort of wearing it just slanting off on a sling so quite open i wanted something that
would be a little bit more fitted and to lie quite well over the puffed shoulder of my dresses
because that quite dramatically changes the shape of the top of the cape because obviously
this is much shorter distance than distance here so the side of the cape needs to be slightly longer
my rectangle is at the moment all equal just rectangle it can be adapted but also i realized
that in the time over there they had a nice method of the new of that and that's the book
the costume in detail and it's a brilliant resource and there's another cape as you can see
in snow hill manor very very similar to mine with shoulder capes and inside the body of the
cape is inserted onto yoke so you have a very long yoke and i've looked at a couple of more places
and you can actually have it um very shallow or very long one depending on what you had available
i suppose i've opted for a shallow one just enough to get me to the point of the shoulder really
so that is going to be my yoke i might put my hood on in a second so this is the yoke that
is going to just over the point of a shoulder from which the cape can descend directly to the
ground it still has to be about an inch longer than the rest of the cape but an inch much better
than like four so that's my yoke this will be finished completely on this side so that it's
the the cape can be um stitched on the capes the small capes will be stitched on here the same as
the collars are well they don't have to be there um you can have capes without collars at all just
the capes which is fun but since i had a little bit of fabric left i've got a collar proper
collar it's already um lined with canvas and stitched on so that is going to be forming my
little collar that fits over that yoke so at the moment i have got the main cloak partially
um the trim is the trim is added on on one side and pressed and i'm going to stitch it
again by machine because life is just too short on the other side um and funnily um
where the originals seem just are so much easier to work with mostly because they are
i don't know um i think the grain of the fabric has all to do with it here um the fabric was
trickier to work with it's velvet so um not my choice of a fabric but i didn't have much choice
in the matter it was done before before i organized it so it looks nice so so that's that
that's lovely but it doesn't behave like main silk quilt which means a lot of problems with
stitching it the seam allowances i've just pressed them so that should help a little bit
um so well let's see how how long it's going how much it's going to be
to get it on the main cape and then deal with the lining so so far it's taken me half a day
so it's not an easy and and product you do a lot of very very boring stitching um if you're doing
it by hand it will take a few good days of very boring stitching um so if you plant all hand
stitched have a good audiobook and podcast ready i'm currently on re-listening to the whole jack
reacher series because that's just a good background i suppose so i'll meet you here
right progress is happening slowly but still i've got two capes prepared for hand stitching
lining all around them so i reckon that is going to be my job in the car because it doesn't really
need a lot of huge precision i mean just needs some precision but it's not too fiddly um so it's
easy to just do it without getting dizzy or anything when when you're on the waterway
not driving obviously um so i've got two of these done i have inserted the lining at the top
of the cape proper i've pressed the seams open and pressed again so that i have that very very
long edge now ready for cartridge pleating to the yoke so i've already started on some cartridge
pleating i'm not going to pleat the very border i want to keep it as it is and the rest is just
basically doing a very very long running stitch in a very long and strong thread that keeps
tangling but they don't have to be very small because if your stitches are too small
then you won't be able to insert all of them into the yoke so usually for that about the ratio i'll
do about an inch long stitches so each they're just an inch and that means they gather quite
nicely if you need more fabric other than the small you just make the pleats deeper that's all
it takes so that's the job for this evening um and i think that's all i'll be doing in the workshop
here i've got my color ready um also ready i just need to insert the lining and obviously i'll be
adding the color once the yoke is connected to this one which is going to be a little bit later
i will see if i could get i still have tomorrow i might be able to um stitch this one overnight
i am doing another very um time-consuming project with a lot of shoe cash embroidery for
for my husband so that is the priority um for me at least um so i hope to catch up with a little
bit more behind the scenes sort of stuff and sewing stuff if not i see you in scotland we'll see
well it's friday morning and last night i did this so i cartridge created the whole of the cave
as you can see and mounted it on the yoke so we are starting to see
cape shape so next step is going to be get the openings for the arms in the correct position
and then the lining is not attached yet that's a job for later um and obviously a color and a cape
so it should be sitting just right here it's growing on me so yeah let's get the color on
and then the capes and i think i'll either make the capes all set in or we'll make the second one
the bigger one detachable um mostly because it's so big it obstructs another feature of the cape
which is the back is going to be pleated to the waist and drawn to the way so that it shows
of the silhouette whereas the front flows loose and obviously that feature is going to be headed
with a long cape and over but without it should show it nicely so collar first and then pleating
i think before i go the collar is on it's great let's pleat the thing pleating the cape
and it is at this point you realize that four meters actually wouldn't be too little
for the cape but it would be just about right this is three and a half so i think i could do
with a little bit more with a little bit more volume here but this bit is going to be attached
to band to the back and there were a few things you could do it you can actually have a
channel running on the inside securing either well both lining and wool that that's enough
with openings at the side and then draw a cord through it so basically a drawstring or
the way i'm doing it i'm going to put a band of wool here to secure the pleats
there's going to be an opening on both side with the girdle attached to a belt strap attached so
that's the girdle goes underneath to the front i will play with that a little bit more
but that's basically what it is and when the capes are off it it will just show very nicely
pleated back so that's the plan well the back is pleated and secured with a tape i didn't use a
bit of wool because i realized i had a very nice matching vintage sort of ribbon with little
pheasants which is quite appropriate so it's stitched up with the same thread that matches
the other side so that what you can see here is this so now off i'm going to pin the capes on and
see how they look on if they need any further shaping and then it's just lining to do and
that's it so the capes are pinned i had to do quite a lot of reshaping of these and the top
one got a bit of a seam to get a bit more roundness around the neck as it turns out the original
shape of these was designed for smaller shoulders which probably means that our late 30s
were the big big sleeves started to diminish so um i don't have many late 30s
um garments i think riding habit or something like that so i need i needed to adapt it to my
earlier ones that do have some sleeves so the top cape is sort of nicely finished and it will just
be whip stitched nicely to the yoke the bottom one i didn't really want to lose a lot of volume
of that so i just pleated it and this one is going to be attached our basically bound with a tape
with ties and this would be able to be worn on its own um so that's my cunning plan at the moment
so just some hand stitching to do really well welcome from scotland a beautiful place and i'm
just finishing the cape i have put in the lining as you can see the very bottom of the lining is
going to be free i think for better flow and i've just marked and i've cut the slits for the arms
so i just need to fold it in and put the lining in as well and then and after that i just need
to put the two capes on and we are done hopefully it's not going to be raining all the time at the
moment it's quite vile outside so i'll be able to shoot it without a lot of rain maybe tomorrow
morning well the cape is ready as you can see and it's quite a something really glad i've managed
to get it on um the color can be up or down depends how much you put it on and as you can see
this is the tie that ties the waist nicely in i'm going to take off the lower cape because
the lower cape is detachable to show it up but as it is it's quite a comfy little garment
maybe i should iron my things i'm going to take some photos um the you can see the ties from the
lower cape so that can be completely removed and i chose random tasseled velvet ribbon ties for
keeping the cape together it could also be tied with brooch i suppose or any other ties
as you can see that's where my sleeves are going well let's take some for a few photos and then um
we can get and do some video without the cape well we took off the under cape so you can see
the shaving at the back and it's just starting raining because being scotland it changes every
second so we're going inside i mean it's okay if it rains on my on my cloak i'm fine with that
it's my cameraman that i'm afraid of because he's underdressed at the moment
let's go hope you've enjoyed the whole production of a cape i'm going to enjoy wearing it
