How To Install The Magpul XTM Hand Stop Kit On A 1913 Rail (HD)

Uniform & Arms
3 followers
2 Video Views·Apr 22, 2026
A quick how-to video for installing the Magpul XTM Hand Stop Kit on a 1913 rail.
Hey everyone, today we're going over how to install the relatively new Magpul XTM hand
stop kit on your 1913 style rail.
Here are all the contents of the kit, first thing you want to do is go ahead and take
your hex wrench and take out the cross bolt that goes across the main part of the hand
stop there.
Go ahead and take it out like you would any other hex wrench accessory and go ahead and
set that up on your rail wherever you'd like, obviously you can test fit this to whatever
spot you like.
Move that out of the way of the box, I don't think it can do us any good.
And set it up on your rail where you want, go ahead and line it up and you're just going
to screw that in.
Once you get that screwed in there, the next step is going to be taking these two textured
pieces, the ones without the additional hand stop on there, put them on your rail section
and just push from the sides until you hear a click, there you go, that's your click.
Next up you want to take your extra hand stop pieces here, those go just in front of that,
go ahead and line them up on your rail the same way and you're going to push them until
they click, there you go, there's your click and then the last two pieces which are the
short ones go out in front and again it really doesn't matter which way you do that, which
direction, just push them in there until you get that click, maybe if I can do it on film
here, there you go, there you go, that's your installation there.
I hope that answers some of the questions you had about installing your XTM hand stop
kit and as always guys, thanks for watching, thanks for subscribing and we'll see you guys
in the next video.
