🛠️ How to open Lenovo Legion 5a (15", Gen 11, 15AGP11) - disassembly and upgrade options

LaptopMedia
183 followers
18 Video Views·Apr 21, 2026
🔬 In-depth Review: https://laptopmedia.com/review/lenovo-legion-5a-15-gen-11-15agp11-review-the-fastest-15-inch-rtx-5060-laptop/
📈 💵 Specs and Prices: https://laptopmedia.com/series/lenovo-legion-5-15agp11-gen-11/
TESTED CONFIGURATION:
- AMD Ryzen AI 9 465
- NVIDIA GeForce RTX 5060
- 16GB RAM
- 512GB SSD NVMe
- 15.3”, 2560x1600 (WQXGA), 165Hz OLED
0:00 - Introduction
0:27 - Removing the Bottom Cover
3:07 - Bottom Cover Thermal Pads
3:28 - Internal Components Overview
4:14 - Disconnecting and Removing the Battery
5:12 - Removing the Primary SSD
5:55 - Accessing and Removing the Memory Modules
7:36 - Cooling System and Internal Layout
hey everyone today we'll open the lenovo legion 5a15 gen 11 if you want to learn more about its
build quality display options thermals and full benchmark results check out our detailed review
on laptopmedia.com the link is in the description below let's dive in to reach the internal
components we need to remove 10 screws and lift off the bottom cover we're using a jis
number one screwdriver this screw and the next one are slightly longer and remain stuck in the
hole so we'll pull them out later with tweezers here is a quick look at the screws using a thin
plastic tool we start releasing the clips that secure the bottom panel be careful not to slide
the tool too far inside and damage an internal component the bottom cover is now removed right
above the ssd area the inner side of the bottom cover has thermal pads that help move heat from
the drives to the cover and away from the system here is the connector between the battery and
the motherboard this is the primary storage drive it uses an m.2 slot designed for a full length
drive here is the second storage slot under this shield are the memory slots the wi-fi card sits
under this black cover under the cooling assembly sits the discrete graphics processor and here is
the processor location the cooling system uses two fans and large heat pipes to move heat away from
the cpu and gpu we start by disconnecting the battery connector next we remove the three screws
that secure the battery you can check the result of our battery life test on laptopmedia.com
and don't forget to visit our top 100 laptops with the best battery life ranking page
the battery is an 80 watt hour lithium-ion unit it also supports rapid charge pro which
can reach about 50 percent in roughly 30 minutes now we remove the primary ssd
in our configuration it's a one terabyte sk hynix pcv 10n vme drive running over pci express 4
this laptop provides two m.2 slots in total one works at pci express 4x4 while the other operates
at pci express 4x2 lanes we remove the emi and rfi shield to access the two memory slots
it's best to keep the tape between the shield and the heat pipes intact there are thermal pads
between the shield and the memory modules to help with cooling we remove the memory module
this machine uses ddr5 so dim memory rated up to 5600 megatransfers per second there are two
so dim slots running in dual channel mode and lenovo officially lists support for up to 32 gigabytes
our configuration includes a 16 gigabyte module let's take one last look at the cooling system
and at the rest of the internal components that was the internal layout of the lenovo legion 5
a15 gen 11. if you're curious about its gaming performance display quality and thermal behavior
under load you'll find all the detailed results in our full review on laptopmedia.com
thanks for watching and if you enjoyed the video don't forget to subscribe
