SUSHI-SUKI - A sushi inspired Suzuki GSXR mash-up by Sticky's Speed Shop.

Motor Club
67 followers
6 Video Views·Apr 20, 2026
We are always getting asked a lot of questions about the bikes on display on Arch3 and of the
current crop, this one, Sushizuki, probably gets more questions asked about it than any other and
it's easy to see why. So we thought we would get Sticky Matt from Sticky Speed Shop down to answer
some of those questions. Matt, thank you for coming down mate. Good to see you. Yeah you too
man and thank you for letting us have this on display. As I say, there's a lot of questions
but before we dig into Sushizuki, let's just run through the history. So what was the first show
you had a bike at? 2018. 2018, what was that? That was Lamb Chop. Lamb Chop with the bike shed on the
side, I remember that. Yeah, cool. 2019? That was Goldie. Goldie, yes. GSX Engine Harris. Yes. And
then 2022, because we missed a few, you went big in 22. We did, we came and did a video at your
place when you were getting ready, didn't we? And that was the four bike year, wasn't it? So it was
Widow Licker. 69. 69, the Turbo Chop. Yeah. Track Wolf. Track Wolf. Did with Ryan Quickfull's
t-shirt design that you helped us with. And then Scud. Scud, your Turbo Bandit. Yeah. Cool. And then
23, Black Pudding, we'll talk about that another time. Yeah. And Sushizuki. So let's start the
beginning. What did you start with? What was the base bike? It's a GSX-R 750 Slingshot, 1989. Yeah.
I've had it hung up on a shelf for years. Already had the swing arm with it, which was a custom
steelheart engineering swinging arm. It's an amazing thing. So you had the swing arm, you had
the frame. Yeah. Motor, this is where the questions tend to start. Yeah. What's the motor? It's GSX-R
1000. So there's a few people at the moment retrofitting GSX-R 1100 fairings to GSX-R 1000s.
And I thought the cooler way to do it would be to put a GSX-R 1000 engine in a slingshot. Right. So
it's kind of the reverse of, because the poster bike from Hatch Moto this year was the GSX-R 1000
frame with a slingshot bodywork, wasn't it? Yes. Whereas this is slingshot bodywork and frame with
GSX-R 1000 engine. Right. So I tried to do it the more difficult way, but we got there in the end.
Yeah. There was a lot of, a lot of headaches, a lot of head scratching. Nearly didn't happen a
few times, but yeah, we made it work. A very different mounting points, everything, isn't it?
The worst bit is, or was, I was trying to get the injection system into the frame, which we just
couldn't do. The fuel injection? The fuel injection, yeah. To keep the engine high enough for it to
handle well, we decided to convert it to side-draft rather than down-draft, which meant a lot of head
work, a lot of time on the CNC. So you took the fuel injected GSX-R 1000 engine, converted it to carbs.
Yes. To fit in the frame. Yes. Side-draft carbs also to fit in the frame. Yes. So, wow. Harry, you might
need to get in here so we can start digging into some of these details because, I mean, from
here down, the slingshot frame was all rectangular tube, wasn't it? So these cylindrical
cradles. I wanted to keep a cradle. That was a big thing for me, to keep the look of the
original slingshot. So there's a couple of people out there that have put high booster engines and
GSX-R 1000 engines in, but I've never seen another one with a cradle. Right. And that's the way I
wanted to do it because I wanted to keep that look. I took it down to Lee at Steelheart Engineering
because it already had a Steelheart arm in it and I thought it'd be nice for him to
to do the frame as well. Yeah. And after a fair bit of convincing and tenacity from me.
He wasn't on board with the plan at first. Yeah. Well, he was. And then the main problem was
their carbs. Trying to get the carbs in, converting it to side draft from down draft.
A lot of it you can't see. There's a couple of big billet braces that bolt up to the engine
to keep it all nice and strong. I mean, it's quite a special engine as well. What did it work?
What did you say the head was from? Something different? Head's from a K6. Right. Because it's
got bigger valves, bigger ports. Right. A little bit better flowed. I thought it might work a bit
better with the carbs. And what's the exhaust from? The exhaust is a, I think it came from a
BSB bike, 60 mil Yoshimura system. Right. The head's from a BSB bike. So it's been worked on
different cams. So you've got quite a lot of race parts on here, don't you? Yeah, that's kind of,
that's, that's what I do. I like, I like to, I like trick old race parts. Right. Collect them
up and then build a project around them. Let's do front to back just so we don't miss anything out.
Okay. So wheels. Wheels are from, they're 16 and a half inch from, uh, from the BSB,
the Vivaldi BSB team. What are forks? Uh, forks are, they came from a Ducati. I can't remember
which model, but, um, yeah, Ducati Ohlins. I love this dash. What's this from? That is from,
I think it's from a Lotus single seater, but could have been out of a touring car.
So, so the guy had loads of old car race parts right from, so it's a car race dash. Yes. Awesome.
Oh, these, um, the hell brakes. Is this a thumb brake? Yes. Yeah. Hell really helped me out on
this one. They supplied all the brakes. So yeah, some really lovely stuff. Yeah. Okay. So, Oh,
top yoke. Well, top yokes off another race bike. Not sure where it came from. It was the wrong
size. So we had to bore it out to fit the, the Ohlins forks. Right. And then we've got the motor,
the whole frame conversion. This is a stock slingshot tank, right? It is. Yeah. With an
endurance filler cap. So one normal one and a quick fill. Awesome. I have the seat where you
got your, your three lightning bolts carved into the phone. Yeah. I'd get a signature in there.
And what's the seat unit from RGV two 50. Right. And this, yeah. And then we made a vent for the
top, um, somewhere to house the old cooler. Cause we had a, not a lot of space up front.
Right. So oil cooler at the back with the venting seven, 10, obviously a seven 50 frame,
a thousand CC motor. The old call is a little bit of a nod to the old, uh, endurance
GSXR thousands, sorry, GSXR seven fifties back in the day. Awesome. And then, I mean, looking down
at that oil cooler with your soy sauce fish on the top, that leads us quite nicely into, um,
the graphics. Let's talk about the graphics. So what's your process for the visual of this?
So Ryan has, uh, has been involved in, uh, the last two builds, um, quite heavily. I come to him
with some ideas. He's got some ideas and send him a silhouette of the bike and he designed
something crazy. Then we try and try and reproduce it in paint or in real life. Talk to me about the
sushi. Well, why sushi? Uh, I like sushi. What does sushi Zuki mean? Sushi lover, sushi lover,
sushi lover translates to sushi Zuki. Of course it does. And that's what it says on the side,
right? Yeah. Yeah. That, that reads sushi Zuki. You got your little prawn there with the skull.
Yeah. And then there's kind of almost like a skull camo vibe going on. Yeah. I think that came from
a world war two bomber, right? That's where the inspiration for that comes again. That was,
that was Ryan. It sent me some pictures of some planes with some hand painted camo on.
Oh man. So he did the design and then you implemented the design onto the bike, right?
Yeah. Yeah. Me, me and Ian get down and, and sort of decided workout to try and make it work.
Um, the graphics got half times in, so they had to be printed, um, to give it that kind of
nineties vibe. Yeah. It's so striking, mate. It's so striking. It was, it was a bit of a showstopper.
Thanks. What, what have we not talked about? We need that. What are the foot pegs from foot pegs
I think. Right. Uh, yeah. Went into a bit of a Google black hole trying to find the right pitch
spacing. You've not got it running yet. Have you? It was a bit of a last minute rush for the show.
It was. Yeah. Yeah. We still need to do a bit of development with the engine needs to be flowed.
Um, need to, need to find the right ECU for it as well. I've got a guy who's going to wire it
up for me. Okay. Yeah. We'll get some videos of it on the diner. It's going to, um, it's going to
It is. Yeah. What horsepower do they have? It's like one 80, something like that in one of those
we're hoping for mid one nineties normally aspirated and it should sound amazing with
the carbs as well. Yeah. I love the, I love the slicks as well. Yeah. I've got to say a massive
thanks to, to Gav. Um, he, he helps me with every build. Right. Definitely wouldn't get it done
without him. It's kind of a team effort, isn't it? It's all the team effort. I don't want to make
out that I do it all on my own. There's, there's a group of us. Everyone helps out. Yeah. Gary as
well. Come, come down and spend a couple of hours or a couple of days with me. Right. Getting the,
getting the bikes done. Yeah. Yeah. There's a, got some good people around us. Yeah. Thanks for
letting us have it. If you want to see it, then, um, come down. It's going to be with us for,
and for a little while, can we keep it for a bit longer? A little while. Okay. And then
you take it off and get it running and bring it back and we'll hear it. That's it. Definitely
hear it erupt in the arches. Yes, mate. Thank you. Thank you. Hope you liked the video.
Don't forget to like follow subscribe and any comments,
stick them down the bottom and I'll try and get back to you.
