Landing on an aircraft carrier can be a risky business, especially when things go wrong.
Such a situation happened to Captain George Duncan, a test pilot who found himself in a
tricky situation. He was testing an F9-F5 Panther, and things didn't go as planned. The airplane
dropped below the correct approach path and collided with the edge of the flight deck,
breaking in half. Thanks to the quick response of the flight deck crew, they managed to rescue
Captain Duncan and extinguish the fire. Nowadays, when landing on aircraft carriers,
pilots apply full throttle upon touchdown. If they catch one of the arresting wires,
they come to a stop. If not, the full throttle allows them to continue down the angled flight
deck and take off again, known as a bolter. In the early days of aircraft carriers with
flat-top designs, planes had very little room for error when landing. That's why emergency
barriers were set up at the end of the landing area. These barriers were around 3 feet tall
and were lowered after each successful landing to clear the way for parked planes.
If something went wrong, like a broken tail hook, the barriers were crucial in preventing
crashes and injuries to flight deck crew. However, these barriers weren't always enough
to stop a plane completely, and that's where helicopters were coming into play to rescue
pilots. Nowadays, barricade netting has replaced barrier wires. The modern barricade system
consists of tall engagement straps that catch the aircraft and transfer the load to a barricade
engine below the deck. This system is only set up in emergencies, like a malfunctioning tailhook or
landing gear. Although barricade landings are rare and can be tough on pilots and planes,
they are still a safer alternative to uncontrolled crashes.
American aircraft carriers are equipped with these systems, which have saved many lives
over the years, making them an essential part of carrier operations.