How to Make a White Pine Bonsai from Scratch.

Design & DIY
11 followers
33 Video ViewsยทApr 18, 2026
A detailed video about the initial formation of a white pine (Pinus Parviflora) bonsai.
We have a few options. This one. This one. Basically, they're all pretty much the same.
In the same condition. You can take any pine tree.
This one's on this little cone, by the way, which was there.
Well, let's take this one.
Well, as always, before we start working with a tree, we.
Take it out of the pot. We'll also see how long ago it was planted there.
It was planted a long time ago. The roots have reached the edge of the pot.
Now, as always, we open up the root collar a little. You can see the grafting site here.
The parviflora pine is related to some wild species. I'm not sure exactly which,
which is more or less hardy. I don't know why they're not grown from seed,
but that's a secondary issue. So. This grafting site is, of course, not very pretty,
but what can you do? Later, when this base thickens, it will somehow cover this grafting site.
We'll remove the excess unnecessary roots.
The growing top. Let me remind you again that there's a term called Nibari.
Nibari are roots arranged radially from the base. And the quality of the bonsai directly
depends on the quality of the Nibari. That is, the more radiating roots at the top,
the thicker, the larger they are, the more visually they improve the bonsai, giving it age.
And a solid appearance. Okay, so we've opened it up a bit. It was about 5 cm deep in the pot.
You see, the roots hit the pot, then start to grow in a circle. We won't expose too much.
Conifers don't like that. So, what do we have? Pine, in principle, is quite flexible at this age.
To protect the trunk of our pine from cracking, to prevent the trunk from splitting or breaking,
we use a natural material called raffia. Well, there's a lot we don't have in Uzbekistan yet.
And instead of raffia, we use regular electrical tape. Only we wrap it outward, not inward.
Now we'll pinch the needles a little to expose the trunk. A little. Pine trees respond well
to pinching. We'll completely strip the trunk of its needles now. We'll pinch them like this.
We'll expose the base of the branches.
We'll expose the trunk. We'll leave small tufts at the tips of the branches.
We don't need this branch.
These buds can be completely removed. We don't need them yet either. Pine is a very grateful
tree. It produces buds easily. Accordingly, the branches run almost the entire length of the
trunk, both below and above. Great! So, since we don't have any raffia, we'll use our regular
electrical tape. We use blue tape, but that's okay. And so, little by little, we wrap it around
the entire trunk. I repeat, we're doing this so we can wrap it with wire and bend the trunk quite
radically. And to prevent it from cracking or breaking, this electrical tape will protect us.
Even if it cracks somewhere, the electrical tape will prevent the sap from leaking out,
this resin. And it kind of stops the resin from leaking out when the crack occurs,
and it will heal peacefully in that spot. Okay, let's move up.
Okay, that's enough. Okay, now we need wire 4 to 5 millimeters thick here.
My apologies if our wire isn't as aesthetically pleasing as the Japanese.
We haven't found that kind of wire yet. We're using regular insulated aluminum wire.
Well, the insulation will also protect the bark a little.
Aluminum wire. This cross-section, I don't know what it is, but it's about 4 to 5 millimeters
thick. So, we fix the bottom part of the wire deep, as deep as possible, into the base of the root,
the root of roots, and begin to guide it upward. Let's be careful with the grafting site.
That's it. Now ours is more or less taking shape. Now that we've removed the needles and,
in contrast to the electrical tape, we can work with the tree. So, this lower branch will most
likely go sooner or later. When bending, we take into account that the branches that
remain should be on the outside of the bend. That is, we've bent it here.
And the branch should start not inside the bend, but on the outside.
We return it here and slightly upward. The grafting site is very dangerous.
If we shape the tree in a style called, um, Moyogi style. It's a straight style, a formal,
Moyogi style. So, we're now creating the initial shape like this. Well, basically, that's enough.
Now, using a thinner wire, about 2 millimeters thick, we'll spread these branches apart.
This one will go back. These ones here, this one is extra. We'll remove it, but not now,
but later. This one is a bit thick for the top, but we won't remove it yet.
So, let's take a thinner wire, about 2 millimeters. Now, let's clean the needles here too.
Okay, we've cleaned them. We'll have. So, let's remove these needles too.
And slowly wind the wire.
Okay, now we need the wire here. When winding, the main thing is to secure one end.
That's right. Sometimes it doesn't turn out very nicely, but experienced craftsmen, of course,
do it all much faster, much more attractively. Okay, we'll secure it here by the trunk.
We'll trim this end later. Now, we've moved it here. Now, we'll wrap this branch like this.
This will be the front. We'll move this branch back. And after we've done this, or rather,
before we apply the wire, I forgot to tell you, we need to decide on the front of our tree.
This is very important, as it will look like this when planted. I'm assuming it will be planted at
a slight angle like this. This branch will go to the side. The parts we've already wrapped with
wire will also be like this, or rather, like this one, we'll probably move it back,
and we'll lower this one here. This will be the back branch. The main principle is that the
branches shouldn't be vertical or on top of each other, so that the light penetrating them hits
the bottom branch and each of them. That is, if you look at the tree from above, the branches will
fan out. So, if we plant it at an angle like this, then our crown should return to the base of the
trunk. Now we'll return it like this. We'll return this tip here to the base and a little higher.
That is, if the tree is planted like this. This will be our left branch. This will be the right.
This will be the left. But we'll need it if we move this branch back, then we'll need to move
this branch forward a little. This will be the back. This will be the back branch. This one,
as I said, we'll remove it later. It's unnecessary in this case. And here we have this branch,
which, um, isn't very good. If, but if we remove it, then we'll have a void here.
So, we'll shorten it for now. Shorten it. If any branches appear on it over time,
then we'll fix it like this together with this one. Now we'll use a small wire to spread them
like this. So, this is a little higher. That is, once again. Now we'll put something underneath.
It's a little difficult to remove by myself. I don't have an assistant. The guys are busy.
Here we've put a little tray underneath. That is, the tree will grow at this angle.
Now we'll wrap some wire here and there to make it clearer. We'll secure one end and off we go.
And we need some more wire here. So, we have the first branch here. This one, well,
let's cut it off now. We don't need it at all. Then we have the back branch. Let me remind you
that the back branch is very important in Bonsai. It gives the tree volume. Here we have two side
branches. We'll secure the eye now. The second tier. Here is the third tier. Let's hope that
some shoots will appear from here too. We will have a continuation of our tree. And here we have
the top. Here I am looking into the camera now. Oh, the sun is reflecting a little. In principle,
this is enough for the first stage. Now we will plant it back in the same pot it was in.
This wire will be on the tree for about 6 months. Okay, let's take another look at what we've got.
Let's clean up the upward growing roots a bit. And, in principle, we can now transplant it into
a flat one, since we've removed enough soil from the top. In principle, this will fit into some
wide bonsai pot. Now let's take another look at what we've got. So, we'll plant it at a slight
angle. This branch will be slightly in front. This one will be behind. This one will be above it.
This one at the back also gets light. Here, too, we have light coming through here. Although,
maybe we should do this here, and this one back. We'll see. That'll probably be better.
Right? So, we'll have this branch, which means the light will fall here, fall here, fall here,
fall here. These branches, accordingly, will already be slightly above the front ones,
because we're planting the tree at an angle. The top is leaning a little. It should be
leaning towards the viewer, towards the vantage point. That's how we're gradually getting this
pine tree. Now we'll bring another tray and plant it in another pot. We can try this pot right away.
It's a bit big, of course. And our goal right now isn't to plant it in a pot right away.
Our goal is for the tree to grow in a training container or maybe in a pot like this in the
future. But for now, maybe not. It's too narrow. Maybe we'll plant it here, or we won't bother.
We'll plant it in its native pot. Although, of course, it would be good to give it a bigger pot,
uh, so the roots can grow. And we'll plant it in a basket. That's right, we have baskets.
We have baskets like these. A basket is the best thing. We can immediately plant this pine the way
we need it. We'll fill it with its native soil along with sawdust. As we know, conifers like
and sawdust will acidify it. That's it. And sawdust, I say, and needles. The needles will
provide us with the necessary microflora, the necessary acidity. We'll remove the roots
and use the same native soil in which it came from the nursery. There's pine bark here and
I see perlite. The main thing is to maintain this angle and wait for these upper roots to
spread out in a circle. Now we'll adjust the slope a little. The pine is leaning too much.
That'll be better. And we'll add more soil. Our soil is specially designed for conifers
with basebark and this rootlet.
We'll remove the roots later. We won't disturb it for now. Let it grow minimally for now.
This is roughly what our pine looks like.
And let me remind you that this is a parviflora pine, a five-needle pine.
Its needles are so short and they make such interesting trees.
So, here's our face. This needle, this branch, slightly to the side. We take it like this.
We'll cut off the excess wire. And this is what our pine tree looks like. Now the back branch
has merged with the side one. Did you notice in the video? It's really helpful when you're
shaping trees to take photos and look at them. Because when you look at them, you think,
oh, that's great. And then you look at the video or the photo and all the flaws are immediately
visible. So, you'll need to pay close attention to the photo. And now we've moved it here.
It now merges with this one. That's why the vantage point is important. That's how we'll do it.
It's very important from where you look at the tree. That's why. There's such a thing as a
tree's front. Now we've moved it there. It's merged with this one again. I think this option more or
less suits us. That's it. Now we'll water it all and put it in the garden. We'll even bury the
basket in the ground like this for the winter. Well, as always, let's water our little pine well.
We'll remove these top roots later. For now, we'll leave these alone. And here's the final
lap of honor. It's reflecting. It's hard to see in the video. Well, I hope that's how it turned out.
Uh, without the video, it looks pretty good. As for the video, we'll see later. You can always,
since we have the wire wound around, make some adjustments and tweaks.
This is our pine tree for today. Thank you all for your attention.
I hope this video was helpful. Happy Bonsai, everyone.
