Full Tutorial of Finding the Loch Ness Monster | FIFISH

Decoding Loch Ness
7 followers
Hello everyone, welcome to QYC. Today I'm going to show you how to find the Loch Ness Monster,
one of the most elusive and legendary creatures in history.
The Loch Ness Monster, or Nessie, as it's affectionately known, is a mythical animal
that is said to live in Loch Ness, a large freshwater lake in Scotland. The legend of
dates back to ancient times when the local pigs carved a strange aquatic creature into
standing stones near the lake. The first written account of Nessie appears in a 7th century
biography of St. Columba, who allegedly saved a man from being attacked by the beast. Since then,
there have been hundreds of sightings and reports of Nessie, but no conclusive evidence of its
existence. The Loch Ness Monster has fascinated me since I was a kid. I remember reading books
and watching documentaries about Nessie and wondering if it was real or not. I always
dreamed of going to Scotland and seeing Nessie with my own eyes. I wanted to solve this mystery
once and for all. Today, I will use all my information and knowledge that I have been
able to find so far to make a guide for searching for the Loch Ness Monster for you.
Without further ado, here's your plan. Step 1. You want to choose the best time to visit the lake.
Late August is the best time of the year to search for Nessie. It is one of the driest months in
Scotland, especially in the Loch Ness area. This means that you will have less rain and more sunshine,
which will improve your visibility and comfort. You will also have longer daylight hours,
with sunrise around 6 am and sunset around 8.30 pm. This will give you more time to explore the
lake and its surroundings, as well as to observe any signs of Nessie's activity.
Step 2. Find the best place to search for the monster. There is no definitive answer to where
is the best location to inspect the Loch Ness Monster, as the elusive creature has been recorded
to appear in different parts of the lake over the years. However, Oakheart Castle is one of the most
frequent spots for Nessie's sightings, as many people have claimed to see something moving or
splashing in the water near the castle. Fort Augustus is a charming village at the southern
end of Loch Ness, where you can watch the boats passing through the Caledonian Canal Locks.
It is also a good place to see Nessie, as some people have reported seeing large shapes or waves
in the water from the canal banks or bridges. Dor's Inn is also a great place to see Nessie,
as it is home to Steve Feltham, who has been living in a van by the lake since 1991,
dedicated to finding Nessie. He is often seen with his binoculars and cameras scanning the
water for any signs of Nessie. Once we have decided the time and location, we can start
our preparation. Please note that you can never really great searching each part of the Loch Ness.
It has a surface area of 56 square kilometers, making it the second largest Scottish
log-by-surface area after Loch Lomond. Great searching the whole lake is too difficult,
so focusing on Woodcart Castle, Fort Augustus, and Dor's Inn is a better idea.
And today we have some company. You have some amazing underwater robots that will help you
with this task. 5Fish VEVO, 5Fish EGO, and 5Fish Pro W6, and they are designed by QYC Technology,
which is us, a leading company in underwater robotics. You need to divide each area into
squares with size equals to the length of the robot's cable, which is 300 meters. Then you
need to move the robot to each square and scan it using your sonar at different depths according to
the depth map of each area. You can use these maps to estimate how many times you need to scan
each square at different depths. Calculate the number of areas that you should divide each of
the three locations for your great search using your 5Fish Pro W6 underwater robot and M750D
image sonar. To do this, you need to estimate the length and width of each area, the area that your
robot can scan in one position, and the average depth of each area. You can use some online tools
or software to help you with these estimations. I used an online tool called Area Calculator to
estimate the length and width of the three areas. This tool allows me to draw polygons over a map
and calculate their areas through parameters. I choose the satellite view for the map and zoomed
into the areas around Bukhar Castle, Fort Augustus, and Doors Inn. Then I drew polygons and roughly
covered the water surface near these locations. The tool showed me the area and parameter of each
polygon. I used these values to estimate the length and width of each area. You can try this
tool yourself and see how it works. It is quite easy and fun to use. Doing a carpet search requires
your 5Fish Pro W6 underwater vehicle and M750D image sonar. It is known that the tether of the
is as long as 300m, while the radius of sonar is 120m. The horizontal aperture is 130° and the
vertical aperture is 20°. Then you need to use some formulas and calculations to find the number
of squares that you need to divide each area into, and the number of scans that you need to do for
each area. I used the formula A equals to R square multiplied theta divided 2 to calculate
the horizontal area that your robot can scan in one position. I got A equals 16,368 square meters.
Then we used the formula A equals A plus B multiplied h divided by 2 to calculate the
area that your robot can scan in one position. I got A equals 11.4d square meters. Let's assume
that the horizontal and vertical areas are rectangular, with length of 120m and 11.4d
meters respectively. Then I multiplied them to get the total area that your robot can scan in
one position. A equals to 120m multiplied 11.4d meters equals to 1368d square meters.
Let's divide the length and width of each area by the length of your robot's cable,
and then run it up to the nearest integer to get the number of squares that you need to divide each
area into. In the end, let's multiply the number of squares by 2 for Urquhart Castle and Doors Inn
areas, and by 1 for the Fort Augustus area to get the total numbers of scans that you need to do
for each area, based on their average depth. Here are the final results that I got. Urquhart Castle
area, numbers of squares is 28, numbers of scans is 56. Fort Augustus area, numbers of squares is
8, numbers of scans is 8. Doors Inn area, numbers of squares is 28, numbers of scans is 56.
Therefore, the total number of areas that you should divide for the three locations is 64,
and the total number of scans that you need to do for the three locations is 120. Once we have
confirmed how many areas we need to search, we can start to prepare the necessary equipment and
supplies. In addition to the three robots and their controllers, batteries, chargers, tethers,
and accessories, you also need a good camera with a zoom lens, a tripod, binoculars, a flashlight,
a map, a compass, a GPS device, a phone, a laptop, a power bank, some snacks and drinks,
and some warm clothes. You also need some safety gear, such as a life jacket, a whistle,
and a first aid kit. Check the weather forecast and the local news before you go to the lake.
Step three, arrive at the lake and set up your equipment. Find a suitable spot near the shore
to set up your equipment. Make sure that everything is fully charged and functional.
Connect your phone or laptop to the controllers of the underwater robots and make sure that they
are paired correctly. Attach the sonar system, water sampler, and robotic arm to the Fyfish EGO
and Fyfish PRO W6 respectively. Also, turn on the cameras and lights of all the robots and adjust
their settings according to the water visibility and depth. Choose one of the three areas to start
your search, Urquhart Castle, Fort Augustus, or Doors Inn. Rent a boat and drive it to the chosen
area. Find a suitable spot to anchor your boat and deploy your robot. Turn on your robot, your sonar,
your camera, and your UQPS topside antenna. Launch the Fyfish app on your laptop or tablet and
connect it to your robot via Wi-Fi. Step four, scan and observe the lake for any signs of Nessie.
Use the Fyfish VEVO as a scout robot to explore the lake surface and shallow areas. Use its 4K
camera and 5000 lumens LED light to capture any unusual movements or shapes on or under the water.
Also, use its AI vision lock feature to lock on any potential targets and follow them automatically.
Stream the video feed from the Fyfish VEVO to your laptop and phone in real time. Use the Fyfish
PRO W6 as a work robot to perform various tasks underwater. Use the app's map feature to view the
map of the lake around your chosen area. The map will show you the point of interest of the lake.
Use the app's auto cruising feature to select a point of interest on the map that you want to
explore. The app will automatically calculate the optional route for your robot and reach the
point of interest. You can also adjust the route manually by adding or deleting waypoints on the
map. Confirm the route and start the auto cruising mode. Use all three robots in a coordinate manner
communicating with each other through their controllers. Switch between different views
and modes on your laptop and phone to monitor their progress and status. Also, listen carefully
for any sounds or splashes that might indicate Nessie's presence. Sit back and relax as your
robot follows the route to the point of interest. You can monitor its progress on the app's map
and video screens. The app will show you the live video feed from both of your camera's lenses
as well as the sonar image from your sonar's transducer. You can also see the battery level,
temperature, and other data of your robot on the app's dashboard. You can also control some of the
settings of your robot such as its lights, camera modes, etc. using the app's button or sliders.
When your robot reaches the point of interest, you can switch to manual mode and take over its
control using the app's joysticks or keyboard. You can move your robot in any direction using
its six degrees of freedom capability. You can use its mechanical arm to grab, lift,
or measure objects underwater using its various tools. You can use its sonar to scan objects or
features underwater using its different modes and settings. You can also use its dual 4k camera to
take photos or videos of anything that interests you. Step 5. Capture and document any evidence of
Nessie. If you see something that looks like Nessie with any of robots, immediately take
photos and videos of it with their cameras. Try to zoom in as much as possible and capture different
angles and perspectives of it. Also note down the date, time, location, weather, conditions,
depth, distance, altitude, sonar data, water sample data, laser measurement data, and any other relevant
details of your sighting. Step 6. Analyze and verify your evidence of Nessie. After you finish
your observation session or when your battery runs low, return all three robots to shore safely.
Transfer all your photos, videos, data, samples, notes to your laptop or phone or to external
storage devices. Examine them carefully and look for any clues or features that might confirm
or refute Nessie's identity. Also compare them with other photos, videos, data, samples, notes of Nessie
Step 7. Share and discuss your evidence of Nessie with others. If you think that you have found some
convincing evidence of Nessie, share it with others who are interested in the topic. Upload your
photos, videos, data, samples to some online platforms or forums that are dedicated to Nessie
or cryptozoology. This is how you can find the Loch Ness monster with these amazing underwater
robots. I hope you enjoyed this tutorial and learned something new today. If you did, please
give this video a thumbs up and subscribe to my channel for more content like this. And if you are
feeling adventurous and curious, why not try this yourself? Go to Loch Ness and search for Nessie
with these robots. You never know what you might find. Maybe you will be the one who finally solves
this mystery once and for all. Or maybe you will just have a lot of fun and excitement along the
way. Either way, I would love to hear from you and see your results. Please leave a comment below or
send me a message with your photos, videos, data, samples, notes, etc. of your search for Nessie.
I will be happy to review them and give you my feedback. Thank you for watching this video and
joining me on this quest for the Loch Ness monster. I hope to see you again soon on my channel.
Until then, stay curious and keep exploring the mysterious and wonders of the world. Bye for now.
