Makita is the only major power tool brand that is still independently owned, still publishes its parts catalog, and still lets you fix your tools in your own shed. Every other brand in this industry has been acquired, restructured, and engineered for replacement. Makita hasn't. This video explains exactly why — and shows the first signs that it might not last. We break down the ownership structure that separates Makita from Milwaukee, DeWalt, and Craftsman. We look at the financial pressure building from TTI's $15.3 billion revenue machine. And we examine the 40V XGT platform — the architecture that uses the same sealed controllers and proprietary battery chemistry that killed repairability everywhere else — and ask whether Makita is choosing to stay repairable, or simply running five years behind Milwaukee on the same curve. The 18V LXT platform has a fifteen-year backward compatibility record and parts stocked at over 500 US service centers. The 40V XGT is a different question. We tell you exactly which platform to buy — and which one to watch. If you've sourced XGT parts recently, drop the model, the year, and what you found in the comments. That data doesn't exist anywhere in aggregate. Your answer is the first version of it. #machine#tools#Powertools
Three years ago, you called the parts number on the back of your Makita drill.
The part existed. It was in stock. It cost $14. You pressed it in with your thumb,
ran the tool another season, and never thought about it again. That was not luck. That was a
company making a choice. Every other major brand in this industry has since stopped making. Today,
that company is the last one still making it. And there are signs, specific, documented,
architectural signs, that the window may be closing. This is not a Makita advertisement.
This is a forensic look at one company resisting an economics that has already consumed Milwaukee,
DeWalt, and Craftsman. We are going to show you the structure, the evidence,
and the early warning signals. And we are going to ask the question the tool industry
does not want asked out loud. How long can one company hold the line?
Makita Corporation was founded in 1915 in Nagoya, Japan. For the entirety of its 110-year existence,
it has never been acquired, never absorbed into a conglomerate, never handed to a holding company
in Hong Kong or Connecticut. It trades on the Tokyo Stock Exchange under ticker 6586.
The founding family maintains influence through a holding company called
Mako Shoji, which controls a 12.5% stake, enough to determine board elections. Japanese financial
institutions hold over 65% of the remaining shares through cross-shareholding agreements
that are specifically designed to resist hostile acquisition. That ownership structure is not a
footnote, and it is the entire explanation for why you can still get parts. When a company
controls its own factories and supply chain, spare parts are a revenue stream. When a holding
company owns the brand, spare parts compete directly with new tool sales. The holding
company always prefers the sale. Makita, as of fiscal year March 2025, posted consolidated
revenue of 753 billion yen, a 61.8% rise in operating profit. They are not struggling.
They are not being pressured by a parent. There is no parent. That absence is worth
approximately $14 in brushes and 20 minutes on a Saturday night. Tektronik Industries was founded
in 1985 in Hong Kong by horse Julius Pudwill as an original equipment manufacturer,
making craftsman tools for sears and vacuum cleaners for Bissell. It acquired Ryobi's
power tool businesses between 2000 and 2002. It purchased Milwaukee Electric Tool from Atlas
Copco in 2005 for $625 million. By 2025, Tektronik Industries reported full-year revenue of $15.3
billion. Milwaukee grew 7.9%. Gross margin hit 40.3% in the first half of 2025, driven by their
own filings, which describe the positive mixed impact from the growth of the high-margin
Milwaukee business. High margin. That phrase does the work. High margin on power tools in 2025
does not come from better engineering. It comes from removing the cost of serviceability
and replacing it with the cost of replacement. Makita's revenue is approximately one-third of
Tektronik Industries. The disposable premium tool model is winning financially. Every year,
Milwaukee grows faster. The pressure on Makita's board from foreign institutional investors,
now at nearly 30% of the shareholder base, increases. They are not a threat yet, but they
are present. And they are growing. The evidence for where Makita currently stands does not come
from the manufacturer. It comes from your comment section. After the Milwaukee video,
tradespeople left over 2,000 responses. The pattern was not random. One commenter,
whose top comment had 46 likes, said he has only ever had one unrepairable Makita.
That was because the repair cost exceeded the tool's value, not because parts did not exist.
Another commenter said he can repair all of his Makita tools, most of his DeWalt tools,
and none of his Milwaukee cordless tools. He is migrating to Makita solely because of this.
One person sticks with Makita because it is affordable to fix and service in his shed.
A mining professional confirmed that when paying out of pocket, it is always Makita.
One commenter who owns a repair shop confirmed Milwaukee is highly unrepairable. He acknowledged
Makita has a performance disadvantage at the top end, but he still recommended Makita for anyone
who wants a tool that can be fixed. That testimony is not nostalgia. It is a purchasing calculation
made by people who work with these tools every day and who pay for the repairs themselves.
Now, the warning. The Makita 18V LXT platform is the repairable golden age. It uses standard
fasteners and modular architecture. Parts are stocked at over 500 service centers across the
United States. It has a 15-year backward compatibility record that no other major
brand has matched. If you are buying Makita today, the LXT platform is the one with the
documented track record. The 40V XGT platform is a different question. XGT tools contain digital
communication chips built into both the tool and the battery that monitor heat, overload,
and discharge in real time. That is the same sealed controller architecture that trades people
identified as a death sentence when the controller burns out. XGT brushless motors
use rare earth magnets with no brushes to replace. The new 8Ah high-power battery,
released March 2026 and designated BL4ERO80H, uses tabless cell technology and proprietary
battery chemistry that makes third-party replication structurally difficult.
The XGT platform has now expanded to over 170 products. Makita is fully committed to
this architecture. The question is not whether XGT is a good platform. It is. The question is
whether Makita is choosing to stay repairable or whether they are simply behind Milwaukee
on the same inevitable curve, using the same technologies and making the
engineering decisions, with serviceability consequences arriving on a five-year delay.
Drop a comment if you have tried to source XGT parts yet. Say the model, the year, what you
needed, and whether you found it. That data does not exist anywhere in aggregate. Your answer is
the first version of it. Makita manufactures across eight countries. Japan, China, Romania,
Thailand, the United Kingdom, Brazil, the United States, and Germany. The Okazaki mother plant in
Japan, established in 1970, accounts for roughly 10% of global production. It is not a showpiece.
It is the research and development hub where tolerances are set and the engineering decisions
that determine repairability are made by engineers who have been there for decades.
Not by a portfolio manager in a Hong Kong high-rise. That is not a sentimental observation.
It is a structural one. Companies that control their own manufacturing have the option to choose
serviceability. Companies that outsource manufacturing to the lowest cost supplier
do not. The option has to exist before the choice can be made. Makita still has the option. Whether
the XGT platform represents a choice to preserve serviceability or the beginning of its quiet
abandonment is the question this channel will be watching. If you are buying tools today and
repairability matters, the hierarchy is still clear. Under $120, choose Ryobi 1 plus 18 volt.
It is owned by TTI, the same parent as Milwaukee. Ryobi is not positioned as a premium brand with
a captive floor beneath it. There is no internal incentive to make Ryobi fail, so a sibling brand
looks justified. Consumer Reports places it above Black & Decker and competitive within its price
tier. Between $150 and $250, consider Metabo HPT Multivolt 18 volt, Koki Holdings, and Japan,
independent ownership. No Stanley Black and Decker or TTY conflict of interest. The 18 volt
and 36 volt dual voltage battery is the most technically interesting platform at this price
point. Forum sentiment among contractors who have switched is consistently positive. The brand
most buyers have not considered is the one they most consistently do not regret. Above $300,
buy Makita 18 volt LXT, listed in Tokyo, independent, the documented platform, 15 years
of backward battery compatibility, published parts catalogs, a repair network that still functions.
Buy the LXT and watch the XGT. Those are two different verdicts for two different platforms
from the same company, and the distinction matters. Makita did not become the last repairable brand by
accident. It became the last repairable brand because it was never sold and never handed to
a board whose primary obligation is quarterly margin expansion. It was never measured against
a sibling brand that needed it to lose. The founding family still holds the stake. The
engineers still work in Okazaki. The parts catalog still exists. For now, those three facts are the
entire explanation. The XGT platform is the test. Not of Makita's engineering, that has never been
in question. The test is whether an independent Japanese company with a century of manufacturing
history can resist the financial gravity that consumed every other major brand in this industry.
TTI grew 7.9% last year. They will grow again next year. The pressure on Makita's foreign
institutional shareholders will increase. The board will feel it. The 18 volt LXT proved the
answer was yes. The 40 volt XGT is still being written. If you want to know which brands are
running the Milwaukee playbook versus which ones genuinely are not, that is what this channel
documents. No brand deals. Data, not opinions. Next week, there is a brand that marketed a lifetime
service agreement as its entire reason to exist and quietly restructured that agreement in 2023.
We have the before and after documents. See you then.