Want a beautiful patio or porch that looks high-end without spending a fortune? In today’s video, I’m sharing easy DIY patio and porch decor ideas that are budget-friendly but look like something straight out of a magazine!
From simple outdoor decor projects to creative styling ideas, these DIYs will help you turn your space into a cozy, inviting retreat you’ll love all season long. Whether you’re decorating a small porch or a larger patio, these ideas are perfect for adding charm, warmth, and personality—without breaking the bank.
Music Courtesy of www.epidemicsound.com paid subscription https://linktr.ee/pattijgood My Channel - / @pattijgood My Other Channel - / @pattijgooddesign More Diys and Ideas - https://pattijgood.com/ My Favorite Crafting Supplies - https://www.amazon.com/shop/pattij.good Instagram: / pattijgood Tiktok - / pattijgood Facebook Page: / pattijgooddesigns Pinterest: / pattijgood
Hey everyone, welcome or welcome back to my channel. If you're looking for some budget-friendly
DIYs to liven up your outdoor space, you've come to the right place. I've got three easy
DIYs to share with you that you're really going to enjoy. So, if you want to know how to make them,
stick around. I'll show you how. Thank you so much for being here. I really appreciate it.
Right Maxwell? Okay, for this first one I'm using a piece of wood that measures one by six by eight
and I'm just using cheap pine on this and I'm going to cut three pieces at 20 inches in length
each. Now, you can cut this on a regular saw. I'm going to cut this on my miter saw but you can also
use a miter box to cut this as well. So, you're going to cut three at 20 inches and when I take
it over to my saw, I go ahead and cut the first one and then I just put the other one up next to
it as I'm cutting it so I can make sure they're exactly the same length because we're going to
be making a planter box and you want to make sure that all those pieces are exactly the same size
and it's a lot easier if you just turn it around and put your blade up against it
and then pull your wood all the way up against that blade and then you'll make sure that you
get an exact cut right there. Just kind of line it up, push it up there where that blade is and
then go ahead and cut that and we're going to cut three pieces exactly the same size
and this is a great little saw. I got it at Lowe's because it does cut and pull towards you so it
cuts bigger pieces of wood and it's not as intimidating as a big circular saw. Okay,
next I'm going to just line these up. This is going to be the bottom and the two sides and
I'm just going to get a measurement across both sides so I can cut my other pieces. So,
I'm going to cut my two end pieces at seven inches each and I'm going to cut two of those
and again on your second piece if you just line your blade up right up against the side of that
you'll get your pieces exactly the same size. Next to attach these I'm just going to take my
two long sides. I'm going to add some wood glue all the way down the edge on both of them and
then I'm going to glue these to the base and you don't need a lot of wood glue. Don't put too much
where it's just oozing out so much or you'll be doing a lot of sanding and I'm just going to line
that one up like that. Do the other side. I'm just going to put my glue right onto it and then I'm
just going to take a little craft stick to spread it out and then I am going to clamp these and set
these aside and let these dry and then you want to clamp these right at the very, very bottom
because you don't want to pull the sides in any and then we're going to attach our seven inch pieces
here in just a second but just go ahead right at the very base of these pull these in and then we're
going to do the other two pieces as soon as these dry and then just go ahead and test your two end
pieces just to make sure that you don't have that snugged in too much and then we'll glue these on
here in just a little bit. Okay next I'm gonna go ahead and glue on my lower pieces. I'm gonna go
down the side and then down the bottom and down the other side and glue this in. Now I do have
some long clamps for these. If you don't have long clamps that's okay you can just push it up there
pretty tight and you could actually put something heavy at the very end just to keep it up. Then
you're going to attach the other end exactly the same way and I'm sorry there's so many shadows
but it's like 93 degrees outside and I'm standing underneath a shade tree so but I think you can
still see what I'm doing here and then once you get this piece on here we're just going to go ahead
and clamp them and I would highly recommend investing in a set of clamps. You can get those
at Lowe's, Home Depot, Amazon. They're not that pricey but they make a big difference on your project.
Next I'm taking a brad nailer and I'm going to nail in everywhere where my joints are. Now you
don't have to do this part if you don't want to but it really does help secure it a little bit
better but you'll be fine just with the wood glue as well and you could use screws if you want to
Okay next I'm going to take some time just to sand this just to make sure that I get all the
wood glue off of this before I stain it. Okay next I'm taking a 23 inch piece of the same wood and
I'm going to cut another piece exactly the same size. This was what was left of my first piece
of wood so I did end up getting two pieces of wood but I'm not using the whole second piece.
So you're going to cut two at 23 and then we're going to cut a shorter one to go with it
at 14 and a half inches. You're going to have one at 14 and a half inches and the other two
are going to be 23 inches and one of the long ones and the short one I'm doing a 45 degree
line across the top part just kind of put your square on there you can line it up and just that's
a 45 right there and then on my third one I'm going to find my center point on this and then
I'm going to do a 45 off the center going down both sides that way it'll make a house top and
you can do it just with the same 45 just line it up on that line you just drew draw your line and
then flip it over and draw your other line and then we're going to cut this on the same miter
saw but we're going to have to change it to 45 degree. Now the box miter saws you can use they
also have 45 degrees so you could do this on a miter box and sometimes at Lowe's and Home Depot
if you ask they will cut your wood for you I don't know if they'll cut them at angles but I
know they'll cut your straight pieces for you and then the one that has the peak at the top
you're just going to go across 45 up to that one line at the top and then I turn this over to the
45 on the opposite side but honestly you could just flip that piece of wood over and cut it
there too you did not have to do this part. For my roof I'm just going to take a one by two and
I'm going to just go right up to that ridge and come over the edge about an inch and then once
I get that one done I'm going to measure the other one against it and we're going to cut it
with an inch overhang on this. These are just going to be straight cuts you don't have to do
any kind of mitering with these. I did the same thing with these I just cut these with maybe an
inch overhang on both sides. Next I'm just going to take some wood glue to attach my roof now you
don't have to have any clamps for these just kind of push them up there together because they don't
really have any kind of stress points on here so just put a little bit of the glue down the edge
and then just glue it right there and we're going all the way up to the top ledge on this one and
we're going to overhang it on the other side and then we're going to glue our other two pieces
exactly the same way and those are just going to be one straight diagonal all the way across the top
and then just set these aside and let them really dry really good before you even pick them up
and if you do have a brad nailer you can do that on the roof just to hold it in place really good
this just secures it completely and then the one I have is a battery operated so you don't have to
have one of those pancake compressors to go with this this tool works really good and I'll give
you the link for the one I'm using here okay next I'm going to drill a hole through my house I'm
putting a piece of wood underneath it and I am going to clamp it now you will have to clamp this
if you're going to do this now I'm using just a regular hole saw you can get those at Amazon you
buy a whole pack of them for about different sizes for about eight dollars and it just hooks to your
drill and then I'm going to take a nail setting tool to get my hole started just the center of
it because it does have a drill bit attached to the hole saw that starts through you want to have
a point where it actually starts and then first the drill bit goes through and then the hole saw
cuts the hole through the wood and this really doesn't take much effort to do it the drill pretty
much does it for itself and if you don't want to get a hole saw you can take just a round circle
of maybe a black vinyl outdoor adhesive and apply it to your wood and I'm drilling the same thing
through all three of mine now that got all my holes drilled I'm just going to take some wood glue and
I'm going to attach the little houses to the back of my little box now you don't want to use quite as
much wood glue as I'm using right here but my spout broke and so I'm having to pour it but you
just want to put enough on there just to hold on to the back but you don't want so much oozing
that you have to do a lot of sanding otherwise you won't be able to stain it where the glue is
showing so and I'm going to take some clamps just to clamp this and I'm kind of going towards the
edge not all the way to the edge just close enough so that I can get all these spaced out
about equally and then after you get it clamped just stand it up and go in front of it just to
make sure that it is standing up straight after that's dry I am going to take my brad nailer and
I am going to punch a couple of brads into the back of this now you don't have to do this step
if you don't want to but it does secure it a little bit more but the wood glue is really sufficient
enough then when I move my clamps I'm going to add a few more brads right into the center
and then I'm going to add my outer one next and then once I get that one finished and it's in
place and dried then I'll add my center one just to make sure it's centered and then I'm going to
clamp this just like I did my first one and then I am going to use my brad nailer once it's
completely dried and you will have to use clamps on this because you can kind of see how it's
wiggling all over the place you won't get it straight if you don't and I'll give you a link
for some on Amazon these are not expensive but they definitely are a great tool to have
and then you definitely want to try to get most of the excess glue off while it's still wet
and then once that dries I am going to take the brad nailer and put some brads in here
my third birdhouse I'm just going to put it right in the center I'm just putting some glue on here
too and I am going to clamp this as well and then I am going to use some brads on this one also
and then I did turn the roof of this one opposite the roof of the other one
just kind of really try to line it up you can just kind of eyeball this
and it does get a little bit top heavy here so you are going to have to stand it up to kind of
let it dry okay next I'm going to stain this and I'm just going to use some Minwax dark walnut
stain this is a really good color and if it can fade a little bit outside it still looks a little
bit dark and then I'm just applying this with a cotton rag I'm just going to kind of get it on
there and then I'll start smoothing it out a little bit so I am going to kind of get it a little bit
dark kind of smooth it out I'm going to go left to right it doesn't really matter and then I'll
smooth it out while it's still wet and if you have any glue oozing you'll want to go ahead and
and sand that section first because the wood glue will not hold any of the stain you'll have a
yellow spot there and then I'm going to stain the entire thing the front the back inside all of it
the same exact color and then don't forget to stain the bottom too so I'm going to take a long
piece of styrofoam that I got from Michael's and I'm going to cut this to the length of my
planter now this is a doubled layer but I'm going to double it up and glue these together
I just want enough to go right into the bottom there and I'm going to attach them with some of
the weld bond glue just a little bead right down the side glue your two pieces together and then
we're going to run a bead of glue down the bottom to put this into our planter and then that way
this will hold really good even in hot weather it's not going to come up like maybe a hot glue would
and I'm going to put this on my front port so I am using some plants that are UV protected so that
they'll stay really pretty throughout the season and they say that these will last years and years
and still keep their same color I'll give you the link for the ones I got from Amazon but I ended up
using the whole bundle to fill this one little planter all right look how pretty those are let
me know what you think in the comments next one I'm taking a piece of wood that measures one and
a half by three quarter and they call this a one by two and I'm going to cut this into eight inch
lengths and I'm going to cut six of these exactly the same size and I did not do that on camera and
I am using just my regular saw I also cut four of them at one and a half by one and a half
okay then you want to take some time and really sand these good so where you cut the wood you're
going to have a little bit of splintering and you can just sand that down smoothly and really take
some time on this part because this can either make or break your project so I ended up with
six of an eight inch by one and a half inch and I did four of the one and a half inch by one and a
half inch and then we're just going to use some wood glue to attach this okay so you can take two
of your pieces and you're going to lay them horizontally and then you're going to put the
other ones vertically across this and we're going to make sure that we do get it even we're just
going to put wood glue on both ends then just line that up and then we're going to do the outside
edges and then do the inside edges next this way you can make sure that you do get it straight
before you do put your center pieces in just kind of get that one lined up and then we're going to
do our outside edge and line it up and that way you'll have a nice square and it'll be perfectly
square if you do it this way and then you can add your two other pieces and then you can kind of
kind of gauge where you want them in the center so that they're evenly spaced and if you work
quick on this get your glue on there before it dries you have plenty of time to kind of move
this around as you want it but just kind of make sure that you do have a good spacing on it that's
about the same and then set that aside and let that dry and if you have any wood glue oozing go
ahead and get it off at this time because we're going to stain this and you can't stain over
wood glue you would have to sand that down next for my little squares for the feet i'm just going
to attach those with wood glue just set those down line them up really good and then this was pretty
much an easy little build you could build little crates like this too if you want to just add the
slats on this side instead of putting the feet on it just really spend some time making sure that
these are pretty straight because we're not going to clamp these we're just going to set these on
here and let these dry and we're just building a plant stand so it doesn't take a lot to hold
this together just just use the wood glue that works perfectly fine okay to stain this i'm just
going to use a minwax honey colored stain and i'm going to use a soft rag to apply this now make sure
that you do put on gloves because this is an oil-based paint or stain and then you just kind
of want to go with the grain on the wood on this and just kind of really fill it in now if you get
too much then you can come back in just wipe off the excess but it is going to start to absorb quite
a bit of the stain and then to get into the little slats between i'm just going to use a regular
little paintbrush a little sponge brush to get those in there you can start by trying to get
them in there but it's almost impossible with a rag you will want to use a little paintbrush
and honestly you could use a sponge brush on this completely it worked really good you just have to
throw your brush away because it is an oil-based stain unless you have some turpentine to clean it
and since these sponge brushes are so inexpensive it's really not worth it but just kind of get it
on there real good to wipe off the excess with your rag and then just continue till i have it
completely stained and next i got one of these little planters from dollar tree it's just a
color so i'm not going to really change anything on it and then i got the little styrofoam from
dollar tree as well and i'm just going to stick it right down in the center and glue it in
got my plants from amazon i'll give you the link for these these are uv protected so they will
stay bright and pretty for years and i'm going to fill this entire container full of these i just
want it to be real full and i use not even a full bundle for these
for this next one i'm using this four by four post it's just a piece of scrap wood i had and
it actually measures three and a half by three and a half and mine measured 13 inches in length
and i'm going to cut mine at seven and a half inches and i'm going to use both halves now i'm
going to have to cut this on my husband's bigger saw if you don't have a saw for a small fee you
can have home depot and lowes they will cut some wood for you okay next i'm going to take a one by
six piece of wood and this measure is actually five and a half inches and it's three quarter
inch thick and i'm going to cut two of these at five and a half inches that way i'll have two
complete squares and i'm just going to cut this on my miter saw this is a great miter saw if you're
looking for one that's not real expensive this is $199 at lowes and it will cut just about any piece
of wood that you want that's less than maybe two and a half inches thick and then i cut another
piece of wood that measures four and a half by four and a half and this saw that i'm using it is
not real intimidating what i'm making is a lantern holder and i'm just going to use wood glue to
attach this so i'm going to take my block of wood i'm going to put wood glue on the bottom and
attach it to my piece of wood that was the five and a half by five and a half now if you don't
want to screw this together which i'm going to here in a minute you don't have to you can just
the wood use the wood glue just let it dry really good next to attach my screws i'm just going to
first drill two holes in the bottom going through my base and into my block and then i'm going to
use a countersink drill bit to drill the hole bigger so that when i put my screw in it'll go
down inside the wood not set on top of the wood and then the countersink bit is this one right
here and it just attaches to your drill exactly like just a regular drill bit wood and then this
is going to go down into the wood so that when you put your screw in there it's inset into the
wood not setting on top of it and then this is what it looks like once you get those drilled
and then when you put your screws in there which i'm doing now they will go down inside the wood
and they will be inset not sitting on top of the piece of wood and if you wanted to cover your
screws you could just fill it with some wood filler and you wouldn't even see those but that's
kind of how smooth it is okay next i'm going to use four of a three quarter by 36 inch square dowel
and i'm going to tell you right now you want to put all four of them together and then just go
ahead and make one straight cut across the bottom to make sure they're even just because it says
it's 36 inches in length does not mean that they all are 36 inches in length and then i'm going to
clamp this right to the corner now my very first one my camera went off so i'm going to have to
show you on the second one how i actually attach this but you're just going to kind of line it up
just to make sure that you get it exactly where you need it before you drill your holes
and since i've already done that one what you're doing is you're just going to put it right against
the edge of your block and you're going to put two on each side of your block and then i'm just
going to clamp this so it stays in place so that i can drill my holes and i am using two clamps on
this because i want to make sure it does stay level all the way up and then i did mark my
sticks with a pencil so i can make sure i get all my holes in exactly the same location so i did all
the other three exactly the same way so you're just going to drill through your piece of dowel stick
all the way through your block of wood and then we're going to do the same thing with the
countersink bit we're going to go right through those same holes and we're going to countersink
this that way they will go down into the wood not setting on top of the wood and then this
countersink bit it works really good it's not hard to use it works exactly like a drill bit wood
but i would highly recommend getting one of these for your toolbox because it does polish your
projects off nicely and then once i got that done i'm going to go ahead and add wood glue to this
and then i'm going to go ahead and screw my screws in now you can find your place real easy because
you're right against the edge of this and you have a little bit of forgiveness on this too if you miss
a little bit but go ahead and put the wood glue on here don't let it ooze out too much because you
don't want it seen on your project and then you're just going to screw that piece right to the edge
just like you took it off of there just kind of line it up and then just screw your screws in and
i am going to brace mine too because it does help it a little bit to do it that way because sometimes
the wood glue will make things slip so you definitely want to get it right exactly where it
goes and then go ahead and put your screws in and you're just going to drill your screws right down
into that piece of wood and then they'll be in set in there and then you're going to do your other
two dowel sticks exactly the same way on the opposite side okay then go ahead and clamp your
next one on there just the same way you did that one and then we're just going to drill our holes
and then countersink them and if you need to lay it down to do it you can do that too just make sure
that you are keeping your drill bit straight and then when you run the countersink bit through
there just make sure that you're keeping it straight as well you don't want to go at an angle
so just kind of really watch what you're doing here and this will stay together really good with
these screws and again if you want to put a wood filler in there and then stain it later the same
color you can do that as well and then just add your glue just like you did the first one put it
back up there clamp it and then put your screws through there and I highly recommend using the
clamps on this that way you can make sure that you are making sure it's straight up and down
and you're going to end up in those same exact holes that you just finished drilling and this
really wasn't a hard project to do it's just a lot of steps by changing out your drill bit put
the countersink bit in and to put your screwdriver bit in it's just several steps but it did go
together pretty easily I think a beginner could definitely do this project and then you're going
to do your fourth pole exactly the same way you did these others once you got the bottom part done
you go ahead and slide your block of wood down into the top part there and you're going to repeat
that process on the top here so you're going to clamp each piece and then you're going to
drill your screw hole drill your countersink hole and we're not going to glue this side we're going
to go ahead and put our screw into it but just kind of spend some time getting these all lined
up good and then you can do this pretty easily and then I am taking a nail setting tool to go
ahead and hammer my holes in here first and I had done that already on the ones I did for the bottom
but you definitely want to do this part this way it'll make sure that your drill bit doesn't slide
around while you're trying to screw it into you're staying in exactly the same place and I'm just
going to try and get these all measured to the same location all the way around and then you're
going to screw your screw right through both pieces of wood and then we are going to countersink this
and then we are not going to glue it we are just going to put screw it in there and then you're
and I'm just using some regular actually I'm using drywall screws on this I think that they
were like one and five-eighths of an inch on these but they're just regular drywall screws
that I used and then do the other three exactly the same way and next you're going to take the
piece of five and a half inch wood and we're going to just put wood glue on this and we're going to
top the top of our little lantern holder this is just going to be exactly the same as we did on the
base of this just kind of get your glue spread on there and then make sure you do get it centered
good I'm just going to turn mine upside down to get it centered and then after I got it on here
I decided to take it off the table and do it a little bit differently and you are going to clamp
this because you do want to stay in place and this way you'll be able to clamp it if you did it on
the table like that or just set there you couldn't do that but this way you can kind of get all your
measurements make sure you got it exactly right and then go ahead and clamp it and once you got
it clamped you can go ahead and take your drill bit and drill your hole in here we're going to put
two of these on this side just run it through there then switch out for your countersink bit
and then put your screw in there and then once you have this side done then you can take the clamp off
and go ahead and do your other side and then we're going to cover all this up on top here in a minute
I'll show you and if you don't countersink any of the screws on the side you definitely want to do
it on the top and the bottom so that it will stand level okay next we're going to take a cup hook and
we're going to put it right into the center of the very top post and we are going to use a nail setting
tool to get our center point and then we're going to drill a hole in it so we can screw it in a
little bit easier this is what we're going to hang our lantern on so make sure that you do get in the
center and then just screw that in next we're going to start building up the top next I'm taking my
four and a half by four and a half piece of wood and I'm going to glue it over the top of my five
and a half by five and a half this will kind of clean all those screws up on top where you don't
see them this will give it a nice little lantern effect on the very top and I'm just going to use
wood glue on this and I'm going to clamp it on both sides then top that next one off I'm just
going to take a piece of wood that measures two and a half by two and a half and I'm going to
add it to the top this way this will really look more like a little lantern and then you're going
to clamp that and put it aside and after this all dries and we're going to start staining it
then to stain it I'm going to use men wax dark walnut and a soft sponge and I'm just going to
stain the entire thing just kind of make sure that you are getting in the grooves you get enough
on there real quick and then just kind of rub off the rest of it that's left after you finish
staining it just if you have any puddles just make sure that it is completely smooth okay and then I'm
just going to set this aside and let it dry really good and then I'm just going to hang my lantern on
the little hook and then I'm just going to take a little plant that I had and set it on the bottom
shelf of the other block this is the little lantern I'm using it measures about three and a
quarter inches across you can use a mason jar put a wire on it but it needs to be less than say
three and a quarter inches and the mason jars are three inches so those work perfectly
and then I got my remote control lights from Amazon just going to put one right down into the
bottom you can do the same thing with a mason jar and then I got these little plants from Amazon
they work perfect to go on the bottom shelf and they come in a pack of six I'll give you the link
for them okay I hope you enjoyed the video today I hope it gave you some inspiration power tools
really are not that complicated to use you just have to be a little bit careful but they are
definitely a game changer on a lot of projects if you like these kind of videos give me a like
subscribe and ring that bell to be notified when I have a new video upload thank y'all so much for
being here I really appreciate it and if nobody's told you today you're awesome see you next time
thanks for watching