Antique Arrowhead Restoration 17th 18th Century Mughal War Arrows

Forgotten Arrows
3 followers
2 Video Views·Apr 16, 2026
In this video, I show the process of restoring antique war arrows to be fully functional and able to be released from a 100lb warbow for my armour tests.
Hi guys, my name is Stavros. I'm the author of the Tome of Six, book one of the Fateful Force,
and I'm also a warbler archer and experimental archaeologist. Now,
those familiar with my channel know about my previous armor test. Now, I tested a late 17th
century Zerubbaktar or plate mail from the Mughal Empire, and in that test I used some original
17th, late 17th century, early 18th century arrowheads from the Mughal Empire as well,
so I've got a number. I'll show you some of those now as well. So, these were some of the
originals that I used in that test. Now, I've got a lot more antique arrowheads here, which I will
show in a moment, and the purpose of this video is to show you the process that I do undertake
in, you know, restoring these arrowheads. Now, it's fair to say, though, because these arrowheads
are late 17th century, early 18th century, they're actually in pretty good condition. They just need
a little bit of TLC. They're just, you know, a little bit rusted. They need to be cleaned up,
polished up, and then refitted onto new arrow shafts like what I've already done with these
ones here. So, these are actually some of the arrowheads I used in my previous test,
and we can see they're actually really nice and clean when we compare them to, say, you know,
so we have to remove them from the reeds, the reed shafts. I will be keeping, obviously,
the reed shafts because the reed shafts are antiques as well, but I want to clean them up,
polish them up, and then attach them to these shafts here. I will have to drill holes into
the shoulder because they are tanked, and then bind them, and then I'll show you the end result.
But so, what I'll do in this video is I'll give you, like, a step-by-step process of what I do do
in order to repurpose these antique arrowheads onto brand new modern shafts. Now, this is a
siege arrow, okay, and we can see with the siege arrows, it's very common to have these kind of
brass or copper type of rings that go around the tanks. I'll show you that on, yeah, here we go,
on one of the completed ones. We can see here at the base towards the shoulder,
it's very, very common to have these kind of brass and copper, as well as probably other metals as
well, rings that go around the tank and fasten onto the base or the shoulder of the arrow. So,
okay, we can see this one here, it's very, it's rusted though, so we can't really see the
coloration of those rings themselves. Now, technically, copper and brass don't rust,
they tarnish, so these are probably tarnished. However, some of the rings could be made of other
metals, and that's why they do appear rusted, and they do need to be polished and cleaned up.
There we go, yep. Then what I'm going to do is, once I've taken all these arrowheads off,
and I'll show that in a moment, I'm going to use this kind of metal deep corroder. It's called
Renaissance. Now, but this won't take all the rust off the item, but what it will do is it
will bond with most of the surface rust, drawing it into the liquid itself. So, I will set the
arrows into a vessel, I'll soak them in this Renaissance deep corroder, and then we'll leave
it for a few hours, and then we'll come back and you'll see what I mean. And then after that, we'll
use a wire brush. Now, I am going to use a Dremel, but I'm going to put it on a very low setting,
and I'll show that on the camera when we get to that stage. These are pretty robust artifacts,
but you still need to take some type of wire brush to them, and I find just a Dremel on a
very, very low setting just makes it easier than doing it by hand, and you're not going to damage
the arrows, and you'll see the end result as well. They're going to come up really, really, really
nice, and there's going to be no damage to them at all before we fasten them to the new arrow shafts.
I'll also add, before I restore these arrowheads, you're obviously taking them off the shafts
themselves before I restore them and put them on the new shafts. I have taken measurements of the
arrows as well, so we do know the original specs of the arrows. I think that's important that we
preserve that kind of knowledge so we know the specifications of original Mughal late 17th
century, early 18th century arrows. I've taken the length of the arrows, and I've also weighed
them, and I'll put all of those findings up on the screen now so you can see them for yourself.
I just thought I'd add that as well, that we have taken the measurements of the arrows themselves
so we can document those because I think that's important for historical purposes.
So we've put the Renaissance de Corota into the plastic container with the arrowheads,
and you can already see this kind of aura or the rust being drawn out of the arrowheads themselves
around the arrows. It's very, very subtle, but obviously we've only had them in there for about
10-15 minutes. I'm going to leave them in there for a few hours, but it's already started to work
as you can see here. Okay, so we're back. I actually ended up leaving the arrowheads,
and I'll show them in a second overnight only because life got in the way. I was a little bit
busy so I couldn't come back to do this step of the process, but you can leave them overnight.
It doesn't really matter. Leaving might actually draw more of the rust out. So I'll show some of
them now on the camera, and we can see here how the gel or the viscous kind of fluid from the
Renaissance metal de Corota has really changed colour. Now what I'm going to do is I'm going to
extract them, and I'm going to put them into some soapy water and scrub them just with my hands.
Now, of course, once we do this, we are then going to want to dry them. Okay, so I also should add
to put some gloves on. So I'm just putting it into soapy water. Soapy water is a bit off screen. You
don't really need to see that, and I'll do this for all the arrows one at a time, and then we'll
come back, and I'll show obviously drying them, and then the next step will be using a Dremel.
Then we will drill the arrow shafts as well, the shoulder of the arrow shaft, to accommodate
the tangs of these arrowheads, and then we'll also wrap them with the... I'm going to use artificial
sinew. That's what I used for the arrows in my arrow test, and then I'll show you how I do that
as well, and then we will have completed arrows, nice and beautiful arrows. Okay, so I'll just show you
this one to begin with. Use the rag on this siege arrow. Bring that to the camera. Here we go.
Before, we couldn't really tell the color of these rings, but now they're coming up a little bit
nicer as the rust has come off them, and we can see that kind of contrast now with the silvering
of the siege arrow. But of course, there's still some rust, some stubborn rust on this, but we've
gotten rid of most of that crusty rust, and now they're going to be ready for that wire brush.
Okay, so we have our Dremel here with the wire brush on it. It's got like a setting from zero
to ten. What we're going to do is put it on between a two and a five, so we're getting there.
Looking really nice. Okay, so that's one of the needles done. You can see it's still got a bit of
that pitting, but that's okay. It gives it some of that character. The tang was a little bit
stubborn with the rust, but it's, you know, come up not bad, not bad. The rust on this one is a
little bit stubborn, a little bit stubborn on the actual tang itself. Really nice so far. Nice
inserts on. Yeah, that's looking nice. A little bit more stubborn. Okay, so here we have it. You
can see those nice brass or copper inserts. Let's do that right there. We can see that contrast.
There we go. Really cleaned this arrowhead up. Looking nice now, and it's ready to be fitted
onto one of the arrow shafts. Okay, so with the Dremel, I'm going to start with a small
drill. I'm going to be eyeballing this, so other people have got, you know, jigs to make sure that
this is accurate, but I've done this so many times that I can eyeball it and get it pretty good.
So I'm going to start with a small drill, and then I'm going to go to an even bigger drill, because
as we can see here, the tang is bigger than the small drill, but we start with small drill to
make the initial hole, to get it accurate, and then we drill further with a larger drill bit
in order to accommodate the full tang. So let's just do that really slowly.
So that's nowhere near deep enough, but we're just going to... Yep, good.
Looks like another, I don't know, 15 mil. Let's see how we go with that. That's perfect, actually.
So we have the brass inserts in there as well. Now, obviously, it's a little bit lopsided,
but I'm going to jig the tang itself to get it straight. I mean, it's just a little bit loose,
but we can play with the tang a little bit to get it tighter into the hole.
We can glue it. We can put some materials in there to fasten it as well. I'm going to do a
version without gluing it because... just to show you that it can be done without glue as well,
but what I'm going to do as well is I'm going to shave some of the shaft
at the shoulder to make it more flush to the arrow, so there's not this big step from the
actual arrowhead girth to the arrow shaft girth. The arrow shafts are between 8 and 8.5 millimeters.
These arrows are slightly thinner than that, so we want to get them to be tapered nicely. We're
going to use the Dremel with a different attachment to do that, and I'll show you how that's done.
That also is pretty gentle. You don't have to be super aggressive with this. We're just going to
shave almost like a cone towards the arrow shoulder, and that way, when we bind it,
it's more flush to the arrow, and because we're binding it, it's not going to be very compromised
at that shoulder, so this is one of the siege arrows that I did using that armor test,
and we can see... I mean, it's subtle, but the binding is thicker and gets thinner as we get
towards the shoulder. That's what we've done with these arrows as well. We've tapered them
towards the arrowhead. Okay, so we've changed the attachment now. It's this kind of like
sandpaper wheel, and we're going to gently shave the shoulder in order to make sure it's tapered
towards the arrowhead itself. Yes, so much better. Yeah, much better. Now, we can keep shaving
a little bit towards the center, but it's not necessary. As you can see with these arrows here,
there's a lot of binding on them, and we saw that actually with one of the originals as well, right?
There's a lot of binding on them, so that reinforces the wood and secures the tang really
nicely. This needs a little bit more tapering, just a little bit more, not too much more.
It's looking much nicer. So, we can see at the top here, a little bit slightly
needs a little bit more shaving. You can see the brass rings closer now to the shaft itself.
Now, the trickiest part is at this moment, you're going to have to play around with the arrowhead
to make sure that it's aligned straight on the shaft, so it's not bending, being crooked. This
is actually true for socketed arrows as well. It's always... The tricky part is getting that
cone right and then eyeballing the arrow down the shaft. You eyeball the arrows down the shaft
to make sure that they're nice and symmetrical, that they are in line with that shaft,
they're not off-center. Whenever you fit arrowheads, at least for me and I'm sure other
people have got a similar problem when you put new arrowheads to the shaft, that seems to be
the trickiest and the most fiddly part. So, be patient with this part. You want to get it right
because once it's secure, you don't want to have to remove the arrowhead, do more work to the
wood that might compromise the shaft. But for those familiar with making their own arrows,
they'll know what I'm talking about. And for those that aren't, if you ever do try this process,
you'll find that out firsthand that this part can be a little bit tricky and it does take quite some
time to get it right, to make sure those arrowheads are straight on the shaft. But when we finish
the whole process, I'll show you and it will be very, very straight.
Okay, so we've fiddled around with it and it's actually coming up really nice. It's not perfect,
but because it's tanged, you can play with it a little bit. You don't want to obviously
compromise the tang or break any of the wood as you bend it. So, you're not going to be aggressive,
but you can fiddle around with it a little bit to ensure that it comes straight on. And once we bind
it as well, especially if you're going to glue it as well, once you've glued it, it's going to be
really secure in the socket itself, but even the binding will help to hold the tang in place.
Now, in a traditional sense, you don't necessarily need to use glue for these because as barbaric as
it sounds, obviously when you lose these arrows and hit a target, let's say they get embedded
into one of your targets, which will more than likely be a human or some type of a war animal,
so in the Mughal Empire, a horse or an elephant. I mean, from a technical standpoint and from a
military standpoint, having the arrow heads come off as you draw the shafts out is actually
something that's preferred. It's going to cause more trauma, more damage to your enemy,
and ensure that they're not going to be able to heal fast enough to come back into the battle,
as it's probably going to require surgery to get some of these arrow heads out. Now,
in a modern context, if we're going to be using these as target arrows, which I personally
wouldn't, but let's just say you do want to, you don't want the heads coming off in your targets.
So, for a modern context, just glue them in. It's no problem, but in a historical context,
you know, you don't necessarily have to glue them in. You want them to be tightly secured. You don't
want them to be loose. Okay, so for an unglued version, what I'm going to do is get some of that
paper towel. It doesn't need to be too much at all, and I'm going to wrap the tang at the bottom
a little bit with it. You don't need too much. This will be enough to end up jamming the arrow
into that socket that we've created and making it nice and tight. There we go. Check this out.
Sorry, here we go. I should put that on camera. Okay, so it does come out still, but there we go.
That's actually tight. With no glue whatsoever, make sure. Yes, here we go. All right, it's a
little bit probably not secured nicely. It's a little bit, you can see, it's upswept a little
bit, so I'll have to play with that. Like I said earlier, this can be a little bit tricky.
Okay, it's nice and straight. So, we're going to use this artificial sinew, and I'll show you how
I wrap it. So, what we're going to do is take that artificial sinew, and we're going to take the end
of it, put it not quite halfway down the shaft, and we're going to now wrap that sinew, try and
get it nice and close, around the shoulder. So, we want to get this nice, and as we wrap it, we're
going to wrap it down the thread, and we want to do it in a way that we're not doubling up too much.
Let me turn this around this way. So, I'm going to have that nice and close.
It's a bit hard, me doing it when I shot on the camera, but you'll see, I want it to be tight,
nice and tight. Make sure you can see. I'll just show you this part for now. That way, it's as
thin as possible, and I'm also prying quite a bit of pressure here, making sure it's tight, so that
it's as secure as possible, and it reinforces the wood as best as possible as well. So,
I'll do the rest of this off camera, then I'll show you how I bind it off. I might need to adjust
the arrowhead a little bit once it's securing the socket to make sure it's nice and straight,
but I'll come back to how I secure the binding without using any glue. Okay, so I've bound it up.
I'm going to snip this off. Now, there's going to be some excess. I can bind it past the excess,
but I'm going to snip some of that off as well, and I'm going to show you how to secure this
without glue. Excuse the noise in the background. So, I'll turn the volume off as I do this.
All I'm doing here is tying a knot by hand. Okay, so we have a little bit of excess of the sinew.
Take some fire to it. You can do this with a lighter, but what this is going to do is it ends
up melting the sinew a little bit. Bit of metal. Press it down. Try not to burn the wood, but this
sinew melts a little bit and shrinks. There we go. So, you don't need to use any modern glues
to do this. Okay, and then what I like to do as well is just run a flame up gently. I'm not going
to let it linger. This will shrink the sinew, making it tighter against the wood, and as you
can see, oops, sorry, on frame, I'm not letting it linger. There we go, and that's what the sinew
wrapping looks like. See those brass? Just one sec here. Yep, we're going to do the same
for the fletchings and down to about here. As we can see, one of the arrows that I used in my test,
that's just to add reinforcement. There's obviously no tang that goes that far down,
but that adds reinforcement to these arrows because these arrows, I couldn't find any
Ottoman-style or Middle Eastern-style arrows that were spined for a 100-pound bow. These are spined
for a 75 to 85-pound bow, so reinforcing obviously the tangs makes sense, but then I also reinforced
the other side of the arrow as well to give it a bit of a stiffer spine so it would come off the
bow a little bit better as well as provide that reinforcement so it wouldn't shatter,
and we did see in that test these arrows came off amazingly well off that bow. They came off
beautifully, so that's what I do. I'll go ahead and bind the rest of this arrow, and then I'll
show you the end result. Okay, so this is the end product. This is how it looks at the end.
Bound it on both sides. Give it a zoom out. Okay, so that's how I restore these Mughal arrows.
Now, I want to say that, of course, I'm an amateur. There are going to be better ways of doing this.
There is going to be more tools you can use. I'm obviously, with the Dremel, I'm eyeballing it. I'm
not using a jig. There are certainly better ways of doing this, and I welcome people's comments,
but I do want to say this though. Despite my amateurish methods of restoring these arrows
and securing them onto these Ottoman shafts, the results speak for themselves. So, when I did use
these arrows in my armor test, you know, obviously, when it hits the plate, the shaft and the fastening
is robust enough to cause a severe curling of the actual arrow itself before it starts
compromising the wood. And then, we also saw in that video, when it hits mail, these arrows
go through the mail like butter. So, they are very effective despite my crude way of restoring them.
So, I hope you enjoyed this video, and thank you very much again for watching,
and stay tuned for my next one.
