Why Planes Can’t Fly Higher Than 40,000 Feet

Children and Growing Up
267 followers
11 Video Views·Apr 13, 2026
Comments are disabled for this video.
You are sitting in an aeroplane, cruising along comfortably, looking out at a brilliant blue sky
above you. And here's something that might have crossed your mind. If planes can fly this high,
why don't they just go higher? More altitude means thinner air. Thinner air means less drag.
Less drag means the engines don't have to work as hard. So why does every commercial flight seem to
top out somewhere between 35,000 and 40,000 feet? What exactly is stopping them? The answer isn't
what most people expect. The atmosphere itself starts fighting back. Let's start with why altitude
is attractive in the first place. When a plane climbs higher, the air around it gets thinner,
and thinner air creates less resistance against the aircraft. That means the engines can push
the plane forward more efficiently. Fuel burns slower, the plane travels further on less.
From a pure efficiency standpoint, the higher you go, the better. Airlines love efficiency
because efficiency means lower operating costs and lower ticket prices. So the temptation to
fly as high as possible is completely logical. But here is where it gets interesting. The same
thin air that reduces drag also starts causing serious problems. A jet engine works by pulling
in air, compressing it, mixing it with fuel, igniting it, and pushing the exhaust out the back.
It needs air to do this. Specifically, it needs oxygen. And the higher you climb, the less oxygen
there is available. At 40,000 feet, the air is already extremely thin. Push much higher and the
engines simply cannot pull in enough oxygen to combust fuel properly. They start losing power,
not suddenly, gradually, but enough to matter enormously. At the same time, the wings are
facing their own crisis. Wings generate lift by using airflow. As the plane moves forward,
air flows over and under the wing in a way that creates pressure differences. That pressure.
Difference is what holds the aircraft up. But if the air becomes too thin,
there isn't enough of it flowing over the wings to generate the lift needed to stay airborne.
The plane would have to fly faster and faster just to maintain the same amount of lift.
And this is where something remarkable happens. At very high altitude, the window between flying
safely and disaster becomes incredibly narrow. On one side, you have a speed that is too slow.
The wings stop generating enough lift and the plane stalls. It loses control and begins to fall.
On the other side, you have a speed that is too fast. The plane approaches the speed of sound
and starts experiencing severe structural stress that it simply wasn't designed to handle.
At cruise altitude, these two limits are already fairly close together. But push the aircraft even
higher and those two limits begin to squeeze inward toward each other like a closing gap.
Pilots call this the coffin corner. It sounds dramatic because it is. At that point,
flying the aircraft within a safe speed range becomes almost impossible to maintain.
Too slow and you stall. Too fast and the airframe starts to break down. The margin for error
shrinks to almost nothing. This is the invisible ceiling that commercial aviation has built its
operation around. It isn't a wall. It's a zone where everything stops working well at the same
time. There's more to it as well. The cabin you're sitting in is pressurized. The aircraft
pumps air in continuously to keep the pressure inside at a comfortable level, roughly equivalent
to sitting at 6,000 to 8,000 feet above sea level. This system works well up to a point,
but the higher the plane climbs, the harder the pressurization system has to work,
and the greater the pressure difference between the inside and outside of the fuselage.
That difference puts stress on the entire structure of the aircraft. The windows. The walls. The
seals. Everything is being pulled outward by that pressure. Aircraft are designed to handle this,
but there are structural limits. Push too high and the forces involved become dangerous.
So what you end up with is not one limit, but several limits arriving at the same time.
The engines need air. The wings need air. The cabin needs to stay pressurized without
tearing the plane apart. And the speed window narrows dangerously the higher you go.
The altitude where commercial planes cruise between 35,000 and 40,000 feet is not an
arbitrary number. It is the sweet spot where all of these systems work together most efficiently.
The air is thin enough to reduce drag and burn less fuel, but thick enough for the engines to
breathe, thick enough for the wings to generate lift at a reasonable speed, and manageable enough
for the pressurization system to keep everyone comfortable inside. That's the thing about
commercial aviation that often goes unnoticed. The aircraft doesn't dominate the sky. It finds
the precise layer of the atmosphere where it can work in harmony with the conditions around it.
Every flight you've ever taken has been a carefully balanced negotiation between gravity,
air pressure, engine performance, and structural limits. The sky is vast, but the usable part of
it is surprisingly thin. Next time you look out that window and see nothing but blue above you,
you'll know exactly why the plane is sitting right where it is. Not because it can't go higher,
but because where it is happens to be exactly right. If you enjoyed this video,
please like and subscribe to Simple Concepts Explained. See you in the next one!
