Cobra just released A LOT of new putters for 2026 under the 3DP Tour and MIM lineups... but how do they actually perform on the course? I gave 3 everyday golfers two Cobra putters for 18 Holes and let them decide if it deserves a spot in the bag. Real golf, real pressure, and honest feedback from every putt.
0:00 Cobra... Putters? 0:45 3DP Tour & MIM 1:20 Real Golfers First Impressions 2:38 My First Impressions 3:34 18 Holes With Cobra Putters 7:10 Will Golfers Choose A Cobra Putter? 8:20 Cobra Putters Are...
So let's be honest, nobody really talks about Cobra when we talk about putters. We know they
make great drivers, underrated drivers. We know they make good irons, underrated irons. But putters,
we don't really even pay attention to them. Most golfers probably just walk on by past Cobra when
they see them at the superstore or the pro shop or what have you. But this year they've released
a lot of putters to the market and they've sent me eight of them to put in the hands of golfers
for 18 holes. Myself and my three buddies, we're gonna go play 18 holes with these things. And my
buddies don't know is if they love one of these and they say that it's worth replacing my putter
for it, we're gonna give it to them. But if they say, nah, mine's better, well then these putters
are just going to collect dust in the back of the rack. So just real quick, the two model offerings
are the 3DP Tour. They released four heads in this. I do have one of each head. This is their
3D printed putter. The plastic lattice is the 3D printed part for weight distribution, MOI,
descending loft technology in the face. These come in at $379. And the MIM line at $279 is just your
traditional steel putter and your traditional head shapes. I think there's like nine to choose from.
And they do also have the descending loft technology, but they have a PBax insert. So just
to give you that increased feel and sensation rather than just a mill putter. But I brought
these up to the golf course and I told my buddies, yeah, we're gonna use some putters today
like we did a couple months ago. You're not gonna know. You're gonna get one for front nine and one
for the back nine. So I put them out on the putting green and just let them have at it trying
to decide which two they would use. And ultimately the two that were left over were the two that I
was gonna use for my round. So let's hear from Chase, Tim and Dave and see why they chose what
they chose. Day-to-day right now I'm using the Newport 2. I've used it for about five or six
years now. Got used to it and like it a lot. Was definitely looking forward to switching back to
trying a mallet again and a couple different styles. Use these two today and this is the
Counterbalance which was very new to me, but I came to like it pretty quickly. I use the
TaylorMade Spyder GT. I kind of lean towards more. I've noticed I lean towards more of the
pallet. It seems more stable whenever I use a blade. I did this morning for these. I just
kind of felt myself not as straight as in the follow-through. All right so I use a Spyder
putter. Blade putters that just never worked well with me, but I wanted to give this one a go
and this one was a little bit wider. Plus as I stood over it, it looked aesthetically pleasing
and then as I was kind of pulling my stroke back and forward, it felt very balanced. Almost like
a mallet. So my process of elimination, this is what I was left with. The Agera RS30 in the 3D
printed model which is very similar to my Spyder that I've been using for so long. Same neck.
The design is actually quite similar. A little more funky with the wings if you will and the
sport for it. Just a traditional blade in this MIM putter. I actually did test them in here. I
rolled them in here and to be honest, the feel on both of these putters, both of these faces
is fantastic. Very different, but both very good. The 3D printed is a really, really nice solid feel
off the face. I thought the MIM would feel just kind of spongy. I love the shapes of the MIM. I
was like why I put that insert there, but that sponginess was not the case. This thing felt
really, really good off the face prior to my round with it, but the boys, they did not get
any test runs other than their time on the putting green. So let's see how these putters
perform for 18 holes. Front nine I played with this counterbalance style, the 3D printed. I loved
the feel of it. Like I could, the feel of the face to me on the 3D printed felt very dull in a good
way. I could gauge my distances really nicely. Getting used to the counterbalance, never used
one before, but it came quick and I know like I feel like after playing with it a little bit more
I'll be really comfortable with it. Overall really love this on the front. On the back
I played with the MIM and more traditional grip. The face of the MIM is a little poppy to me,
so it took a little bit of getting used to speed control more. I had to think about it a little
bit more than I had to think about the 3D printed, so I feel for me the the 3D printed face was a
little bit more natural for distance control and didn't have to think about that. And then with the
the balance of the putter overall and the grip it felt a lot more stable and I could just think
about making a good stroke through the putt and a lot less thought process with this for me than
than going back to this. Yeah, I thought I liked it at first. It felt good, the roll was nice,
the face was came off the face good, but after switching to the non-3D printed one, the MIM,
I really noticed a difference in the the feel of the, it was more what I'm used to with my GT.
More confident I feel, I just felt more confident behind it, a lot more feel to the to the face once
I hit it. Yeah, so this one once again most blade putters I get very handsy with it, so I felt like
I had trouble controlling the follow-through of the putt. I tend to over-accelerate and once again
this, these blade putters and this one specifically over-accelerated and then I found myself getting
very wristy. So from a control perspective of the speed of the putter head, this one once again
just allowed too much variability in my putting stroke. So the moment I switched over from the
blade to the MIM's mallet, I felt an automatic difference in regards to the control. I noticed
the difference between the straight shaft and the double bend in the MIM's putter, which once again
it must throw off the balance for me or throw the balance in balance for me, so I felt more control
both in regards to the pulling back and then following through on the putt. And for me,
18 holes with these, I didn't feel like I compromised or missed a beat on anything. The
wind was up, no one was really hitting it close. It was hard to hit it close, so there's a lot of
lag putting and a lot of putts inside six feet. I really liked how both of these performed. I haven't
used the blade in quite some time, but my gosh, this thing works really, really well. If I had my
choice, I think this one, the Stingray would probably be something that I would really consider
messing with, but the 3D printed feels awesome. It feels awesome. The aesthetic of the 3D prints,
not my favorite look, just the flanges are a bit strange to me, but I get it. I get the design that
they had to do for the weight and distribution and all of that, but the feel off the face on
both of these is fantastic. But the feel with the 3D printed, that descending loft, I've never messed
with that. Really, really good stuff. So 18 holes with these putters, you've heard what everyone has
to say, so now the million dollar question is, will one of my buddies actually choose to put one
of these Cobra putters in their golf bag? A hundred percent. I think after playing with this just
the very limited time today, the few putts, I would love to put the counterbalance and the
combination of this head in my bag. I think it just takes a lot of thought process out of
putting. For me especially, having to be relaxed more and knowing that my
alignment and swing is going to be pure and in line, it felt really comfortable and I think I'm
definitely going to switch over and try it for a period of time for sure. I would say if I was in
the market for a putter, this would be in the lineup for sure. I'm just not in the, I'm comfortable
with the putter that I have. I like it. This wasn't so impressive that I feel like I had to
make the switch. Based on the feel of the blade and just the how it just happened on the course, I
would not purchase this one. However, this one would contest and I'd actually probably say I'd go
ahead and purchase this one over the current putter that I'm currently using. I could conceivably put
either of these in my bag. I could mess around a little bit with the blade in the 3d printed or
the stingray. I might have some fun with these putters because I was really, really impressed and
I, like many of you, was someone who just kind of ignored Cobra putters. I can't even go back
15, 20, 30 years and remember. Bobby Grace is what I'm thinking of Cobra putters. That's a
long, long time ago, but the price point of the MIM and the feel and the feedback really, really
good. The price point of the 3d print isn't crazy. If you really think about it compared to
some five, six, seven, $800 putters that are out there, but you saw two guys like they didn't,
they didn't know. I told them afterwards, like I got to film this, but you can have those putters
like there you want them chase, especially he's been a blade guy forever. And this was really
good from keeps him in his posture. Just I'm excited to play more golf, which I used to see
how he does with this counterbalance as he gets more comfortable with it. But two out of the four
guys putting it or two out of the three guys, let's say put it in their bag. I'm still total
free agent. I'll just put with whatever as I test it, but two out of three guys putting Cobra putters
in their bag. I think that's impressive, interesting, and worth taking note that maybe
Cobra is a name you need to pay attention to when you are looking for that new putter, because
the tech, the price point, and the performance, they tick all of those boxes. It's just maybe
don't walk past them. If you're looking at the pro shop or the superstore, Edmonds Watts,
wherever you buy your putters, stop, roll them a little bit and see, huh, maybe, maybe Cobra's a
name I need to put in the bag when it comes to my putter. Let me know. Do you use a Cobra putter?
Sound off in those comments and we'll see you in the next one. Peace.