How to Make a DIY Trellis Planter | Edible Gardening | The Home Depot

Terrace garden
105 followers
5 Video Views·Apr 6, 2026
Follow the steps below to make a DIY trellis planter box:
0:10 Tools
0:14 Materials
0:22 Step 1: Cut boards
0:45 Step 2: Assemble base pieces
1:02 Step 3: Assemble front and back
1:28 Step 4: Attach sides
1:47 Step 5: Build trellis
2:08 Step 6: Attach casters
When you're short on space, consider growing your plants vertically with a trellis box planter.
Here's what you'll need. First you'll want to measure the lumber,
then use a miter saw to cut your boards to size. To assemble the base pieces, you'll need two 24
inch long 1x8 boards, two 14.5 inch long 2x2s, and two 6 foot long 2x2s.
Using deck screws, attach the shorter 2x2s vertically to the corners of a 1x8 board.
This will be the front side of the base. Then attach the 6 foot 2x2s to the corners of the
other 1x8 inch board to create the back side. To create the front and back of the planter box,
you'll need to add four more of the 24 inch 1x8 boards. On the front half of the base,
secure two 1x8 boards onto the 2x2s with deck screws. Make sure your 1x8 boards are flush with
the top of the vertical 2x2s. Repeat the same process on the back half of the base.
Next, place the base pieces together on a level surface with the 2x2 pieces pointing up and the
bottom boards flush. Now you're ready to attach the remaining 1x8 boards using deck screws,
completing the planter box portion of the project. To add the trellis, tip the planter box on its
back. You'll need the nine pieces of 1x2. Center three of the 1x2 strips across the vertical 2x2s,
securing them three and three quarter inches apart. Then drop down eight inches and repeat
the process for the remaining two sets. To make the planter easier to move around,
attach casters using one and a quarter inch coated screws. Finally, plant your favorite
vining flowers, herbs, or edibles and enjoy. Good luck and thanks for shopping at The Home Depot.
