C&R:正片 [C&Rsenal/中字]一戰輕武器系列09B:戰時Mauser C96
墟散羽铮
2粉絲
8 次觀看·2026年5月2日
Hi, I'm Othais, and this is not a deja vu scenario. This is actually a separate episode on the
Mauser self-loading pistol, construction 1896, as optimized for Germany during the war, earning
it the nickname the Red 9. Let's go ahead and get it over the light box. Still 11 and three-quarter
inches long, we've now reduced the weight down to just 2.45 pounds. Must be those lightning cuts in
the new hammer. Ten rounds, staggered box magazine, stripper clip loading, you know the deal, except
for one big difference. We're now chambering the nine millimeter Parabellum cartridge. Good afternoon
all. If you're enjoying this video so far, please don't forget to comment, like, and subscribe to
our channel. If you want to directly support the making of the series, please consider joining us
on Patreon, Subscribestar, or Utreon. Or you can pick yourself up a poster or shirt from our shop
Thank you all. Last episode, we covered the Mauser C96 pistol from its theoretical conception
until the completion of the Italian naval contract. That, of course, resulted in the
slab side modello of 1899. We further followed this pistol through its service into World War I
and its post-war disposition. However, starting with the Italian contract, we abandon the core
story of the evolving C96. Today, we'll be rectifying that by tracing from 1899 until just after the
end of the war. From the very first prototypes, Paul Mauser had set his sights on German army
adoption of his automatic pistol, which meant getting it into officials hands early and often
in order to gather feedback and make inroads towards his goals. Letters actually revealed
that army officers were being shown the pistol, albeit outside of proper trials, as early as March
of 1896. It's worth mentioning that, at this time, there was some consideration towards a 6mm
bullet as the Germans were also experimenting with a 6mm rifle cartridge. Sharing a bore
meant the possibility of being able to make use of failed rifle barrels. Neither 6mm was
actually adopted, though. The first official demonstration appears in the diary of Master
Gunsmith August Geiser. He reports that Lieutenant General von der Plantz, Oberst von Kirchbach,
and a Rittmister, that's a writing master, Graf Blitzhelm, came to see the pistol demonstrated
by Mauser himself, and that they were apparently quite astonished at the firepower. In July of 1896,
Mauser would travel to Spandau, presenting his pistols to the Gewehrprufingskommission.
He brought along a 6-shot, 10-shot, and 20-shot example. I'm unsure if a carbine was present at
this time, but I do recall he had designed this model in particular to interest the cavalry.
Regardless, he displayed his new products in detail, demonstrated their firing, and left
examples for their further examination. In another demonstration in August, Mauser would fire 1,000
rounds for the assembled generals, including the Württemberg Minister of War, who was deeply
impressed, and apparently declared that the carbine question would be solved with this weapon.
Writing this praise, Mauser reached for the very top and managed to arrange a demonstration for the
Kaiser himself. This was set for August 20th, and William II was suitably impressed, even graciously
overlooking a bit of a faux pas. Mauser had personally presented both the pistol and carbine
versions of his new gun. Fidel Fideli was also present, who had remained the claimed originator
of the C96 design, but we covered that bit of confusion last time. Also present was a Mauser
employee, Hermann Wettler, who was their designated marksman for this display. Having demonstrated the
pistol and the carbine at 200 meters, he was happy to hear that the Kaiser himself had actually wished
to try both. However, when it came time to shoot the carbine in particular, Wettler noticed that
the Kaiser had not picked up on the odd ergonomics of the pistol carbine, and he helpfully took the
left hand of Wilhelm and pressed it firmly into the appropriate place on the gun. Unfortunately,
Wilhelm II suffered from a birth defect that left him with a stunted left arm as an adult.
The exact condition is still debated at times. However, this was, at that time, a point of
embarrassment. Still, the Kaiser took his shots, and every round hit home at 200 meters distance.
He thanked Wettler for correcting his grip, a certain mercy for the poor man. And then he turned
to Paul Mauser, and was instantly curious if the action could be adapted to a rifle cartridge.
This moment would prove to be very defining for Paul Mauser, having to tell the Kaiser no, that
the action was not strong enough. He'd spent the rest of his life chasing a reliable auto-loading
rifle for German service. We'll try to talk about his attempts some other day. Just know that he was
limited by the patents of others, and the odd restrictions of the German army. The two guns
used by the Kaiser in this demonstration, by the way, were brought back to Obendorf and clearly
engraved to mark the occasion. Now, while all these demonstrations and investigations are going on,
an internal conflict would break out, but to tell it requires a bit of background.
Recall the arms company Ludwig Lowe, conveniently founded by a man of the same name. If that seems
familiar to you, then you might have watched our episode on the Ottoman 1887. In trying to leverage
funds for the production of this, his first truly large and independent contract, Paul Mauser had
borrowed heavily from the bank, and relied on Ludwig Lowe, the company, as a partner in the deal.
In actuality, the main partner was Isidore Lowe, Ludwig's brother, who took over the company when he
unexpectedly died in September of 1886. Since the contract with the Ottomans was begun, Isidore saw
an opportunity at monopolizing German arms production, and quietly bought out the bank,
which held the majority of Mauser's company stock. A hostile takeover, one that Mauser was not
consulted on. He would spend the rest of his life as an employee of his own namesake company, instead
of being its owner. Well, during the early 1890s, Lowe, the company, was caught in an anti-semitic scandal.
Difficulties with the new Gewehr 1888 magazine rifles led to accusations that Lowe was sabotaging
the German army, among other claims. While the chief accuser would end up jailed, the market was
already somewhat poisoned. So, Lowe reorganized the company, putting all the arms and ammunition
makers under one banner, that of Deutsche Waffen und Munitionsfabriken, DWM. All right, you're keeping
up with this, because I got one more person to introduce. In 1891, Italy was wavering on the
Mannlicher rifle. In hindsight, we know they would ultimately commit to the hybrid of the Mannlicher,
with their own native design, by Salvatore Carcano. However, this was not necessarily a foregone
conclusion at the start of the same year. So, Lowe hired a former Austro-Hungarian officer,
and shooting instructor, who was conveniently fluent in Italian, to help sell their Mauser rifle.
Georg Luger, who certainly has a history all his own. But, for our purposes, we just need to point
out, it appears Paul Mauser's first true consideration of Georg Luger, came when the latter
sued the former, for his own design. This guy right here, the third lug on a Mauser rifle,
the safety lug. Which Fidel Fideli, later in court, swore was on Mauser test models in the 1880s,
and was present on sample rifles sent from Obendorf to DWM. A feature that Luger swears
he developed all on his own, and totally never saw at DWM in Mauser samples, which he was there
at the same time as, until after he patented that feature in 1894. The resulting lawsuit would drag
on until April of 1898, at which point the matter went to court. And despite all the evidence of
Mauser's prior invention, which seemed to be quite true, German patent law had to do with sales into
Germany itself. And all of Mauser's third lug guns built before Luger's patent, were sold as samples
overseas. Whoa. So, Mauser ended up having to pay Luger, and at this point Isidor Lova had to step
in to settle the matter. He negotiated a lump sum payment to avoid the kettle from completely boiling
over. Mauser, in the meantime, had learned a lesson from Luger. Which is why his patent for the C96
pistol, registered back in 1895, just a year after Luger's handiwork, well, Mauser put his name on it
instead of the company's. In October of 1896, Lova would discover the problem, and interrupted Mauser's
vacation along the Riviera, one that he had done actually to recover from a lung disease of some
sort, with a registered letter demanding he turn the patent over to the company. Paul Mauser would
actually let this matter sit until January, and then began a series of negotiations that were
ultimately resolved in March of 1897. One in which Mauser summarily beat Lova over the head. Waffenfabrik
Mauser would be converted from a limited partnership to a stock company. Paul Mauser
would be appointed the personally liable partner on the board, and was immediately established as
chairman of Mauser Werke, taking the place of Isidor Lova. His pay was increased, and a percentage
share of sales arranged for his descendants. In the event of any increase in capital stock, Mauser
must be given an option on at least 20 percent of that increase. Specific to the C96, all German
production must happen at Obendorf. Licenses may not be granted without his consent. Price and
distribution of the pistol were under his control, and should net at least 25 percent net profit. And
for all this, he turned over the patent to Waffenfabrik Mauser. This little pistol, regardless
of its origins, gave a lot of pride and power back to Paul Mauser. That's for sure. However,
we may see this negotiation ultimately sabotage the future of the C96. Now, returning to German
trials, 145 pistols of the 10-shot variety were manufactured for German investigation, and sent
to the GPK in February of 1898. Proper trials began later on in June, and an interim report
was available in late December. Compared to the Reichsrevolver, the C96 was higher capacity,
faster firing, faster loading, it was more accurate, longer ranged, and had better penetration.
Curiously, the C96 was said to be in no way less robust than the Reichsrevolver, which is
frankly surprising. There were some criticisms, though. The C96 was found to be prone to occasional
jams, though they were easy to clear. And several double shots had been noted, a failure of the
disconnector. One last complaint was weight, but considering the Reichsrevolver... eh.
Thanks to that intermittent jamming and double taps, the trials continued, now with 305 additional
pistols, and then another 148 in March of 1899. This is probably about the time that Mauser
decided to make a minor change. However, I've had a hard time locking down the date of its addition.
Here is our earlier 1899 Italian, which, you notice, has a solid base to the bottom of this
lock assembly. Whereas this later pre-war commercial model has, well, a tab sticking
through. Now this finger is actually an extension that is part of this plunger here, this plunger
here on this gun. And you may recall from last time's animation, this plunger wraps around this
tipping claw, which then serves to bias the lock. In this case, this added extension means that
whenever the lock recoils and therefore compresses the plunger and rotates this... well, technically
the hook gets rotated, which then compresses the plunger. Well, that compressed plunger then
definitely makes contact with our transfer bar slash slip-off disconnector. So in this earlier
assembly, the trigger just lifts and then slips off. Whereas in this later assembly, the trigger
doesn't slip off so much as this little finger pushes, positively pushes, this guy back, making
sure that it absolutely goes behind the trigger and for surely disconnects the action. Now we can
see the change by just manipulating one of these guns, well, both these guns assembled. So, I have
the old slab side large ring hammer. I cock the hammer back and then I hold the hammer back and
pull the trigger. Hear that click? That's the disconnect. So, if I let go, right, hold it back,
click, let go. Yeah, it's not dropping. Now, I have to catch the hammer. If I want to ease this hammer down,
like we talked about in the last episode, I have to catch it. And that's a little bit of a scary bother.
You get good at it, but it's not natural. On this guy, I'm going to cock that hammer back. He has the
new disconnect, which means I can hold this hammer back pretty far. And then, no click. And if I let
go of the hammer, yeah, that's coming on forward. Sorry, I'm in my own path, but you guys get the idea.
That thing is free to drop as long as I'm holding the trigger. And when I let go, she locks back.
If I hold her back, pull the trigger, yeah, she's dropping. And you can hear, there's no, there's no
sound of disconnecting happening because it doesn't happen until this recoils. It's a recoil-driven
disconnect instead of a slip-off. With very few changes overall, it was looking pretty good for
the Mauser pistol, and it would continue to trickle on that way until 1900 or so, which is when disaster
struck. The Swiss adopted their own automatic pistol, and it carried a familiar name, Luger.
You see, the Borchardt C93 was being marketed by DWM. Until now, it wasn't a problem for Mauser,
as the C96 was superior. And despite repeated failures and trials around the world,
Hugo Borchardt was in no mood to significantly refine its design. So, Georg Luger would head
its refinement, and he achieved dramatic results, especially in simplifying and shrinking the
lockwork. In the end, it was elegant, neutral-balanced, used a detachable magazine,
and was exceedingly simple to wield one-handed. The Borchardt Luger would win the Swiss trials,
and it now invaded the German. In keeping the C96 pistol to himself,
Mauser had incentivized Isidore Lova to bank on a dark horse. The only thing that kept the Mauser
in the running from here on was its superior cartridge. Georg Luger would not chamber his
pistol for 7.63 Mauser, saying it would unbalance the gun and make it too heavy. In the meantime,
Mauser would go even bigger with the 9mm Export cartridge, targeted at foreign powers that were
distrustful of small-bore pistols. The origin of this cartridge is just like the 9mm Parabellum.
Opening up the original .30 caliber, the result was a powerhouse that saw few sales. It's
interesting to note the cartridge would reappear later as a round for submachine guns in Austria.
From 1902 on, there was really no hope for the C96 in German trials. So much so that Paul Mauser
would adapt some of his automatic rifle research into another pistol design, but that's another
story for another day. The German government still plotted along in its decision, but ultimately,
the Luger we know would prevail. First with the Navy in 1906, and then the Army's P08.
All right, so Germany was not going to buy. But the C96 actually remains probably one of the most
common early automatic pistols in the collector's market. So where the heck did they all come from?
Well, SIAM bought them in various lots, starting with the earlier Conehammer pattern. We've already
discussed that the Ottoman Empire took in a thousand. The Italian had their contract for
5,000, but the broad majority of pre-World War I pistols were sold into the private market. It's
worth noting a young Winston Churchill was among the early buyers, carrying a C96 through the Sudan
and South Africa. Commercial sales were actually exceedingly good throughout the Boer War,
where the C96 proved to be a popular sidearm. I'm not gonna lie, I can't imagine much better
for long-range pistol shooting at the turn of the century. Thanks to the Italian contract,
the commercial models temporarily took on that flat-sided frame, but the milled panels,
designed to lighten it up just a little bit, soon returned. First they were very shallow,
and then back to their full depth. It also picked up a bit of a billboard marking on the side,
making it very clear where you could get your own. Now following the Boer War, sales began to slump,
so the C96 received some improvements. First up was the safety. The original worked well enough,
but its short travel meant it wasn't always obvious whether it was on or off, so the sweep
was increased dramatically. Interestingly, the safe and fire positions were also reversed.
Around the same time, in 1902, a much more complicated option was trialed. This hammer
joint system was designed to manipulate the hammer along with the safety. Complicated and
dubiously helpful, no one liked this. Around serial number 35,000, estimated to be near 1903,
the C96 hammer would be shrunk down. The new small ring hammer doesn't block the rear sight
when the hammer is down, sitting lower with a smaller thumb pad. Likely this was felt to be
easier to manipulate, and more compact for holstering and drawing the pistol. Also around
the same time as the new safety and hammer, the firing pin received a second securing lug,
the barrel extension rail cover was extended further rearward, and the extractor was lengthened.
Now, you might consider these the death throes of an aging design, but curiously,
this is when Waffenfabrik Mauser finally settled in and committed to mass serial production,
and they focused on interchangeable parts, all around a single configuration. This finally
standardized pattern is now known retroactively as the pre-war commercial series. 10 rounds,
7.63 Mauser, 5.5 inch barrel, tangent sights, no extras. This process begins in the serial range
of the early 40,000s. This commitment to one design also bumped out the last vestiges of the
lightened officers model attempts, which by this point had evolved into what would later be
nicknamed the Bolo model. These could be found in 6 or 10 shot versions, and sported a shorter 3.9
inch barrel, and had a narrower, more squared grip. The Bolo would reappear however post-war,
so another story for another day. Commercial sales would remain the standard for the C96,
with a handful of contracts being the exception. In 1912, Iran, known as Persia Internationally at
the time, would reach out to purchase 1,000 pistols. This grew to 1,100 by 1913, when the
contract was actually finally penned out and signed. It appears that at least 500 were never
delivered due to the start of the war. Instead, they were pulled into German inventory. Also back
in 1913, the single largest contract to date was signed for the C96. 50,000 pistols. Mexico had
actually tried standardizing on the Colt 1902, but after the rise of President Victoriano Huerta,
the relationship between the US and Mexico soured. So his government sought out Mauser and the C96,
signing a deal for the 50,000 pistols, although the deposit paid was only for 10,000 at first.
Which isn't a great start, but at least it's double the Italian contract, the largest by far
even then. While this shaky endeavor was underway, Paul Mauser would actually pass away on May 29th
of 1914. The cause of death was a lingering illness, which ultimately triggered heart failure.
His nephew, Paul Mauser II, would take his place on the board of directors.
Sadly, Mauser never realized his ideal rifle, and even managed to lose vision in his left eye,
his dominant eye, and nearly lost an index finger when a prototype failed him back in 1902. Despite
his passing, we'll see his pistol still had a long service life ahead, although not in Mexico.
In July of 1914, Huerta would resign, and the Mexican government pulled out of the agreement,
with none of the pistols yet shipped. Now, apparently Waffenfabrik Mauser would end up
suing to try to recoup more of the overhead costs beyond the deposit, but I'm unsure how that case
went. Probably not too well. It wouldn't matter much though, because those stockpiles of C96s
would soon come in handy. It's also interesting to note that in spring of 1914, the company had
inquired in Berlin about the possibility of producing more rifles for the German government,
but no orders were forthcoming, and it seems that Germany didn't know how severe the situation
would soon become. Instead, Opendorf would have to once more turn to the Ottoman Empire. In July,
their arms commission would appear once more, looking for additional rifles, and this contract
would actually be started, but never fulfilled. And we all know, in hindsight, it's because war
Waffenfabrik Mauser would be put to work on both rifles and pistols. However, the initial stages
of the war had a pretty severe effect on their productivity. Many of their workmen immediately
volunteered for army service. It got so bad that they had to request that the army administration
please don't draft anyone from our ranks for the Landstrom, and in addition, many skilled workmen
had to be recalled from the front to please just keep making guns for the other guys. New employees
were hired wherever they could be found, and by 1916, Mauser employed 200 women, a first. By 1917,
1,500 women. At full capacity, Opendorf would actually be able to crank out 1,500 pistols per
week. That's one pistol per woman. It's estimated that by the end of 1914, however, at the beginning
of all this, over 50,000 had already been completed. Now, World War One started pretty
late in the year, so I'm betting the failed Mexican contract had a lot to do with that initial gross
number. 1915 would see 85,000 completed, and 1916 rose to 95,000 completed. Most of these would be
commercial sales, but military contracts would quickly follow. The Prussian War Ministry asked
about available inventory pretty quickly after the war started. Mauser had 10,000 on hand and
were asked for another 5,000 to boot. We'll see this number climb later. Württemberg requested
3,000. Austria-Hungary would also order 3,000 Mauser pistols in December of 1914. These were
direct sale. Later, they would have to get them through the Prussian Ministry. From 1915 to 1917,
it appears they acquired just shy of 15,000 more. I'm unsure if there was any overlap with the
initial Prussian order. Now again, the guns I'm discussing at this point are all standard pre-war
production models, so they're therefore chambered for the 7.63 Mauser cartridge, and sporting
a second type safety, the one with the long throw. Well, that safety actually became a problem.
If it's worn out, or poorly fit, like in rapid production, you could switch the safety 98% off,
but not quite click at home. Then, if you pulled the trigger, the hammer could be released by the
sear and rest on the safety itself. Troops would attempt to fire the pistol, nothing would happen,
and so they would check the safety. Touching it released the hammer, resulting in an unexpected
discharge. Reports of accidental shootings, and at least two fatalities, came through the army.
Waffenfabrik Mauser would devise a solution, and the War Ministry issued an order in November of
1915. All Mauser pistols from serial number 280,000 onward would be fitted with the new safety.
Existing service pistols should be sent in for refitting, so earlier serials are common. All of
the new safety guns would have a monogrammed NS symbol for new securing, stamped on the back of
their hammer. Interestingly, there is some evidence that Fidel Fideli had designed this new safety as
far back as October of 1913, which may mean Mauser-Obendorf knew that there was a problem beforehand.
Now, earlier you saw me use this exact pistol to demonstrate the second safety type, because with
the hammer down, it behaves exactly as it always did. However, with the hammer back, we can no longer
engage the safety, unless we put some tension on the hammer, and then, with a separate hand,
there we go, flick her up. Now, what this does is it makes sure that we've pulled the hammer back
behind the sear, before engaging the safety. And, if we try to pull her down, look at how far that
thing falls, because we've kept it way far away from the sear. All right, so when I release it,
you'll watch it slap into the sear. Yeah, uh-huh. They really wanted to make sure that there was no
way that you could have this on safe, pull the trigger, and have it get past the sear. Now, the
safety wouldn't be the only change for the C96 during the war. Another request came through the
Ministry in, I believe, 1916. Recall, the standard pistol for the German army at the time was the
Luger P08, which had been chambered for the 9mm Parabellum cartridge. This was the blown-out
version of the Neckt 7.65 Parabellum cartridge. Neither was as large or powerful as the C96's
7.63 Mauser. So, Mauser pistols could easily be rechambered to use this 9mm Parabellum ammunition.
Which is exactly what the War Ministry wanted. A much easier supply chain. And their wish was
granted, but at a cost. The 7.63 Mauser pistols with stock had been priced at 62 marks. The 9mm
Parabellum versions were billed at 83 marks for the same. Although, I think the army only paid 80
in the end. Waffenfabrik Mauser did not want that 9mm Parabellum cartridge to remain the standard
in the military sphere, let alone being expanded into the commercial sphere. That's for sure. I
don't think they succeeded in the long run. 150,000 of these 9mm pistols would be ordered by
the War Ministry. And, like previous contracts, they were given their own serial block. 1 to
150,000. However, the contract was not completed, ending somewhere in the 140,000 range. I happen
to have one of those German contract pieces right here. So, we can finally get a closer look.
All right, folks. A German wartime C96. And we know it is because of several key features. Number
one, it's a C96. Number two, we have the milled panels appropriate to the period. And we have our
small ring hammer, which actually is marked. We can see we have the little N, big S, monogrammed
new safety marking. So, this is a two-handed style safety. Also, this gun, which is in the 76,000
block, is well within our 140-some-odd-thousand known to have been produced in their own unique
serial group. Overhead, we can see we have the shorter style of extractor from the pre-war
commercial big block of series. And, being chambered for 9mm, this correctly has a sight
that goes from a little 50 here up to 500 there. 500 meters in total, half the distance of what
would have been marked on the 763 versions. Takedown is the same as before. So, I just went
ahead and pulled out this firing pin. So, you can see, coming from the Italian model with the single
log, we now have two logs and sort of a contoured surface. This provides a more symmetrical support
for this firing pin when it's getting battered around in there. Now, you'll find on these a
German crown over U-proof mark. And you may get lucky and see, say, like a Prussian eagle here,
or maybe under the trigger guard. You may even get some unit markings around the grip strap.
This has none of the fancy extras. This is a bare-bones, Red 9 style of 9mm Parabellum C96.
And, speaking of that, let's talk about these grips. Initially, the 9mm Mauser pistols had the
usual plain serrated grips, same as commercial production. But, because the only external
difference between the 763 and 9mm models was to either double check how many, you know,
meters were written on the rear sight, or be able to eyeball the difference in diameter of the muzzle
itself, well, confusion started to become the standard. And there are actual reports from August of 1917,
in which a division received 109mm pistols, when they were meant to get the earlier 763.
This could be disastrous, as it's kind of possible to get some ammunition swapping going on.
Look, it's nowhere near ideal from a safety perspective, or from a logistics perspective.
So, this Red 9 marking would emerge as a solution to the problem of mixing up the two types of very
similar pistols. Now, at first, it appears that this was an ad-hoc solution. You'll get 9s with
all sorts of weird sizes and shapes, in a very narrow band of pistols. And then, in December of
1917, an order was made for not only the 9, but for it to be red, and for it to be of a specific
height. And this became very standardized. Now, Red 9 grips are very often faked, and are not
indicative of a proper German-issued 9mm C96. You're going to want to really understand
your serials, your rear sight, and other various markings, before you just commit to buying one of
these, because you saw a Red 9 on the grips. Now, realistically, none of these changes really
require us to go into a whole other animation. So, instead, let's go ahead and get it right
into Mae's hands, so she can test-fire the 9mm Parabellum C96 for us.
You know, I'm not sure that I can feel a tremendous difference, although
there's something more authoritative about the original cartridge to me.
Okay, now, despite the introduction of the 9mm version, those 7.63s still saw significant sales.
1917 would see 39,000 or so made, which fell to only about 20,000 in the 1918 fiscal year. This
reduction was likely due to the 9mm production stepping up, which seems to account for 65,000
that same year. Both Germany and Austria would field their C96 pistols fairly widely during the
war. While I don't know of any specific tales, they remained a common sight, and certainly a
striking one easily recognized in period photos. They were even, apparently, subject to some
experimentation. This thing just makes the Villar Perosa look sensible.
And on the topic of experimentals, Waffenfabrik Mauser would be approached by the Rifle Commission
in 1917. This was likely all tied in with what would become the Automatic Pistol Carbine program
that ultimately resulted in the revolutionary MP18, arguably the world's first proper submachine gun,
and certainly the first to be produced and attemptedly fielded as such. The C96,
however, was not easily adapted to fully automatic fire, as the excessive fire rate
made the gun harder to control, tore up the action, and really only gave you a tiny burst
of offensive energy. Instead, the old C96 hunting carbine was reworked into a semi-automatic
trench rifle. Ultimately, this proved to be a poor mix of expensive and ineffective compared to the
It also cannibalized pistol production that was otherwise necessary.
Alright, that just about wraps up the C96 through World War I, and curiously,
that's nowhere near the end of this pistol's service life. More changes would follow post-war,
but they're significant enough that I feel like we'll need to go ahead and plan to do another
episode someday. We can cover the Model 1930, the return of the Bolo, and a fully automatic
variation in the future, but for now, I'd like to just point out, you'd expect this,
frankly near-obsolete pistol, would have suffered under the post-war economic collapse and
the disarmament treaties. However, in 1919, sales still held at 13,500, growing in 1920,
and holding on in 1921. Part of this may have been the fact that Mauser-Obendorf began calling
both the 7.63mm and 9mm versions of the pistol by the same name, Pistole 7.63 comma 7.63mm or
comma 9mm. You'd be amazed at how often they forgot to put what was behind the comma when
writing in their ledgers. Not like you can tell at a glance anyway. Now, there's also a whole
mess of post-war police conversions to fix sites, new grips, or re-chamberings. There are details
that we are not going to be going into today. So, as always, take a look, it's in a book, before you
buy something that you don't understand. Okay, let's get Mae in here to talk about her experience
with the wartime C96. Alright gang, we are back. And this time, we have a little bit of the same,
except it's more different-er. Gasp! Let me give that to you, because we are now talking about,
as opposed to last time, the Mauser C96, as provided to Germany in wartime, in 9mm Parabellum.
So, with wartime updates. Yes. What do you see on those grips, Mae? Uh, it appears to be the number
9, or is it a number 6? It's definitely the number 9. Okay. And, uh, any clues on the colour there?
That appears to be a Deep Red. Hmm, I wonder what this gun was nicknamed? Deep Red 9.
Now, there's two 9s. It's the Deep Red 99. Oh, oh god. Right. Because there's two 9s. Right.
Ah, it's on both sides. Right. Feeling fair? Yeah. Okay. Uh, other than that little difference,
can you describe anything ergonomically that may have changed from the earlier Italian 1899
from our last episode? Well, obviously there's a little bit of extra milling going on here. Yes.
Which may have worked, because it is lighter. I mean, it is definitely a little bit lighter,
we didn't happen to notice that, and you didn't want me to weigh them at first.
Um, and it looks like the safety and the hammer, on appearance-wise, look different.
Okay, I wonder if I can do the trick where I can just... Oh! Hey! Yes. Ah, I can drop the
hammer on this guy, not bad. So, number one, is the hammer easier to cock for you? Actually,
let's see. Somewhat. Uh, maybe not for me. Maybe not for me. Scientific experiment time,
yes. Well, here, which one's easier? Ready? Best effort. Yeah, point, and then cock. You're
not terrific at either. I might just be equally terrible at this. You may. I just totally did
that. Now, I'm no biologist, but I suspect you might have girl hands. What? What is this science
you keep talking of? I think it's a little easier to hook the small ring, but, uh, not really.
Too bad there's less ring for you to grab onto, so... It does not block the sights,
either, when you point it with the hammer down. Oh, that's nice, yeah, okay. Is it? Like,
is that really a thing that you want? No, I don't think it's necessary. I don't even know
what the hell I would do. I don't know if that's good or bad. Okay. That would be beneficial,
but whatever. So, you got a littler hammer. It's okay. Yeah. It's still valid. It still
has good stopping power. Yeah. Size doesn't matter. Well, it strikes the firing pin appropriately.
It's not the... No, it's because stopping power is totally different, because you have a new cartridge.
Okay, yeah, but the safety. I did mention the safety was different, as well. So, um, on this
guy... Yep, go ahead and get my hammer back, and then I can't just one-hand this safety on. You
can if the hammer's down. Well, if the hammer's down. Okay, fine. Fine. Hammer's down. Yeah.
Okay, got it. That is a really long, uh, transition, by comparison to the previous,
the 1899. And then, on top of that, it's sticking further out, which makes it more difficult. Don't
take it off. Leave it there. Don't take it off? You want me to leave it on? Put in your holster.
Okay. Draw. Okay. Scientific... That is not fun. Scientific test. This safety is off. It's
inherently easier. No, no, no, you can take it from me. It's a scientific... I don't need to
know a flower is a flower, but I'll... Draw the test. That's way better. Yeah, I agree. Now,
the problem is, what they didn't like is the visual indication. It was very hard to tell
whether you're on safe or fire, because they're, I mean, tiny little difference here. Yeah, no,
I, that I can understand. So, yeah, there is no guessing on this spot, on this guy, I do know.
If you, like, just paint an arrow on the side of it. Yeah, that would be way easier. And then,
for this guy, I do know that with the hammer back, I can't just put the safety on. I have to
two-hand it. So, I have to pull the hammer back and put the safety on with my left hand. Right,
which is the new safety, or the new, uh, new securing. Right. Which is actually stamped on
the back of the hammer. So, you should be able to tell that your hammer has been modified as such.
So, how do you, how do you feel about two-handed safety on? I think two-handed safety use,
in general, is just silly. I don't think it's that bad. It's not expected, though. What,
what pistol do we have here, that we have shot for the series, that requires... Yeah,
but if you think of Doctrine... Specifically designed for you to use two hands. Let me put
it that way. I might just have tiny hands, and had to use my other hand. Well, I'm thinking
of pistols, but they're only much later, like the Nambu Type 14, or something like that. Yeah,
okay. Uh, I will say, for Doctrine of the Time, it's not that bad. Because, realistically,
you never want to accidentally go unsafe. Right. You can't, with that. The way it's set up is,
it prevents the, um, safety release slash sear release problem that we saw, where, uh, flicking
the safety caused the hammer to fall, which was really bad. Really bad. Right, yeah. Uh, especially
because, again, your thumb is right there when it happens. Not the best. Yeah. Um, but, thankfully,
it is one-handed off. Yeah. So, once it's locked back, you just have to... Here, let me see it.
And they switched up the motion. It's no longer... It's the opposite, in terms of the motion. So,
push up for on, and back to go off. Ready. Not my favorite. Would you call this an improvement,
so far? I mean, there is no second guessing whether or not this is on or off, but I don't
think it's an improvement. So, you don't like the little hammer. No. You don't like the new safety.
I mean, I don't necessarily dislike the new hammer. I just, I don't think I'm good at either,
one-handing. Okay, maybe side-swing. Now, let's, uh...
Okay, but also, uh, different cartridge. Yes, that's the big one. 9mm Parabellum. Yep. Um...
That's only going to turn up in terms of recoil, though. Yeah, I can't say I noticed too much of
difference. I mean, maybe there was a little bit less recoil. Maybe. Theoretically, 9mm Parabellum
should be softer shooting. Yes. If we looked at the footage, I bet you could see it, but, again,
I'm with you. I don't... That gun's so high over center. Right, it's kind of hard to... All my time
just trying to control the stupid gun, one-handed. Yeah, unfortunately. So, I guess, does this really
change its position as a handgun, compared to last episode? Not really, too much. Maybe a little
worse? Technically, yes, but that's safety. Now, what about this one? In fact, the cartridge is
smaller. Oh, with the stock. Well, that's a different animal. That's not the same gun.
Okay, so it's just, uh, stock attachment time. That was really fast. Was that your stock attachment
music? Yeah, I really thought that was going to take a little bit longer, so that was my
stock attachment music. You know, we edit the show. We could add our own music for stock
attachment time. You don't have to make your own. I mean, I feel like I did a good job.
So, now the Mayversations are turning into the podcasts, and I don't know if that's good or bad.
Probably good? No, definitely not. Or our podcasts aren't that weird.
Anyway, become a patron and find out what is the future of this show. So, he somewhat lets me off
the leash. Not entirely, but some. We've attached our stocks. Would you say there's any difference
between either of these two stocks, in terms of just ergonomics? Probably not, just from how,
if I'm remembering shooting with them, they didn't really feel that much different. Okay. Now, I know,
hold on, before you start talking about shooting, go ahead, let's get that on your shoulder and
describe what it's like to have a stock C96 on your shoulder. All right. Stock C96 on my shoulder.
Dang, I fit that in tight. Like, that's a really good set for my cheek weld here up on the comb,
and the sights are really clean. Like, this feels incredibly stable with two hands. There's a lot
of that. Oh yeah, there's a lot of that. There's a little bit of wiggle when the stock isn't
perfectly set. Yeah, the stock I have here was a modern commercial reproduction, and it was too
tight when I got it, so I had to fit it to the gun. That's why it's got, it's actually got cutting
fluid and stuff on it, so that I could check where it was wearing. And I fit that thing as tightly as
I possibly could, but by the time I was clearing the angles to get into the thing to fully lock
home, once it locked home, it would be loose again, left to right. And there's something
about the geometries in there, that by the time you get into that shape, either the slight
curvature of it, or just the angle of the feet, I don't know what. But by the time you're in there,
you cannot get a perfect left and right, so they all have a little bit of this. Yeah. I don't think
it's really, I don't think it does anything really. It doesn't feel that bad when you're
shooting it. You don't notice it. When I first strolled with it, I thought it was going to ruin
my shots. Like, I really felt the twisting. No, but look what you're doing there. That's what I
was going to point out, was the grip. This gun, when you go to grip it two-handed, you're supposed
to grab here, but it feels way better to grip up here. No, you're supposed to go up front, I think.
There's a little bit of tail right here for your fingers. I mean, I would expect it to. There's a ridge,
that's where we're shooting. Okay. Yeah, I think you're thinking of the revolver style pistols,
where you have to stay behind. Oh, yeah, yeah, yeah. No, no, no, this is semi-automatic. You can
go all the way up front on, like, a revolver. That's the one big advantage of this overstock
revolver. So, here, yeah. Keep your thumb down. You're gonna get bit by that slide if you don't
keep your thumb down. I'm not gonna get bit by it. It moves, like, a quarter of an inch or less. It
might happen. It's not doing anything. All the action's back here. I'm fine. Yeah, it feels
really wobbly, and then you start shooting, and you realize it just keeps coming back to center
anyway, and it's not really wobbling on you. But, when you started shooting, did it solve any of
your problems with it as a pistol? Oh, boy, did it. So, we were talking before about how the high
bore axis was really causing recoil in this guy to climb. This stabilizes it incredibly. So, it's
the same deal with, like, the Luger. We talked about, in the Luger episodes previously, how
adding a stock to that guy makes a world of a difference, in terms of bringing the gun back
down and stabilizing it. Yeah, and the Luger is the lower bore axis pistol. But, with this one,
really, the shoulder eats up all of that problem spot. Especially having the hand up front to be
able to really control. That double stabilize. You got two points, or three points of stabilization,
because you've got your two hands and your shoulder. Perfect. It's a little slick. I noticed
that. Yeah, this one's got a nice curve to it, though. Yeah, I mean, this one too, but it still
is slippy. I think it's too slippy for a proper rifle cartridge. Probably, yeah. But, for a pistol
cartridge, it's excellent. Not too bad. Now, out of the two, did you notice any real difference
between shooting 9mm or 7.63 in the carbine configuration? Not really. Yeah, especially
not. No, it's too unable to... it's too imperceivable. Like, you really can't feel a
difference at that rate. As a pistol, I think I can feel a difference between 7.63 and 9mm.
Just barely. No, I think I can. I think I can feel it. It's punchier, the 7.63. I mean, it is,
but I think it's barely perceivable. I don't know. It feels snappier to me. But, as these,
I can't tell anything. It's all muddled. I will say, that one is sighted for only 500 meters.
Yeah, so I can't go the full distance, unlike that guy. This one's sighted for a thousand. Yeah,
I can go all the distance. Right. The big reason for that is, this is a much flatter shooting
cartridge that has been developed for long-range shooting as a pistol cartridge, whereas that is
9mm Parabellum. Yep. So, that is developed from the 7.65 Parabellum in order to be a better
man-stopper at short range by having a higher diameter. Which, I mean, not too bad. I don't
think there's going to be a lot of opportunities for me to try to use this past the 500 point. I
mean... No, I can almost guarantee you're not going to get... you're not... there are probably
more situations in which you would get over-penetration with this than there are where
you get under-penetration with that. Right, I think so too. Because this is still not enough
power to clear most obstacles. Like, it's not going to clear, like, a steel plate in the battlefield.
It's not going to clear, you know... I don't think it's going to clear pieces of wood with
very much lethality afterwards. So, you're really probably not getting a lot, except for
better performance at very long ranges. So, in excess of 200 meters. Yep. Which, I think even
at 200 meters, 300 meters, I'm really much rather have a rifle. Same here. So, yeah. Not a bad
pistol, though. And carving. Does the carving aspect of this make the C96 overall go up,
in your opinion, as a combat weapon? So, here's the thing. If I'm in this situation, if I'm
a dude and the pistol is my secondary weapon, right? So, I've got, obviously, a primary that's,
you know, a rifle or a machine gun or something. And the pistol is my secondary. I'm not really
going to need this stock because the situation in which I'm going to reach for my pistol
is probably going to be emergent. I just... I don't have the time to reload my rifle or
reload the machine gun and I need something right then and there. Yeah, they're close at hand.
Right. I don't predict this being the scenario in which I'm going to want to have the stock,
the extra weight on me, to then take the time and then to put it on there and then use the
pistol for long range. As a matter of fact, we talked about it. The stock forces you to have
the hammer down. Right. And locked. Yeah. The stock is also very fragile. That's why this is
a reproduction. That's why that's a commercial model stock that's been fitted onto a military
pistol. Yep. That's not original to it. Because the originals probably broke up. They're very
rare to find original stocks with military pistols. Yep. They're abused, they crack,
they're terrible. So if you don't need the stock, this is a boat anchor. Yeah, it really can be. But
if I'm something like an officer where this is my weapon, yeah, I'm going to want that stock
attachment with it because that's going to turn this into more than just an emergency or something
I have to deal with. It's going to become actually further reliable. That's fantastic. It gives you
some carbine effect. Yeah. In addition to having a sidearm. So you're not going to be issued a
yo dog, you're not supposed to have that rifle. Right. We're on shortages, get that to the front
line. I, other than it's like a stocked Luger, I don't know that I could pick a better gun if I
just had one gun and it was a pistol. I mean, Smith & Wesson Russian number three. Theoretically
could be gotten with a stock, although I don't know if the Russians did that or not. Now I got
to remember our episode properly. But still, that's a revolver. That's only a six shot revolver
and single action only. So no, that's not beating this. No, when we talk about stocked pistols,
you're really looking at this and you're looking at like the LPO-8 and the German Naval 1906. I
think that's the right year. Oh, I hate saying guns. Anyway, the German Naval Luger, the German
LPO-8, the stock lugs were present on the PO-8s, but that was just an artifact of them being
produced after the LPO-8. So yeah, and then this. So what I maybe prefer Luger to this,
probably detachable magazine. Yeah, way faster for loading. But is stripper clip loading so bad
that you would take a non-stocked pistol as your only weapon all over this stock pistol
that stripper clip loading? Well, it depends. We just gave the scenarios in which one's better
than the other. Yeah, yeah, but I'm talking about your scenario was if you had another weapon,
being a long arm. In this case, I'm saying you only get a pistol. Would you choose any
non-stock pistol over this stock pistol? No, I'd pick the stocked because then I at least have
an option to upgrade said one for longer range options. Yeah, I think one of my favorite photos
I've seen from the war is a guy, some officer, I'm going off from memory now, but he has one
that's sort of strapped around his neck just here. And it's just hanging ready. But it was
hanging ready in the stock. And you're thinking, if I only had a handgun, being able to have it
just sort of set across my chest ready for me to just grab and go. Yeah, pretty good. You could do
a lot worse. Yeah, not bad. So that went from soft, yes, to potentially one of the best handguns you
could have in a certain circumstance. You really can put it up there. Just that single stock
attachment, man. That's all it takes. But the same feature, total garbage in the wrong circumstance.
Yeah. War is weird. It is. And it's very hard. It actually, I think that really,
that alone should tell you how hard it can be to pick a handgun for an entire army.
Unless you treat it as just a handgun with no other features. It really can be. Yeah. And then
on this one, unfortunately, parts interchangeability. Yeah, that's a whole other thing. Although they
were, by the time of Germany, they were, you know, but that one, interchangeable. Yeah, that one,
not so much. Yeah. And it's all, it's all a scale issue as to whether or not they want to get into
all that. But I think it did a good job. But like we said last time, these are sort of the weirdest
of the most available pistols. Yeah, it's crazy how many there are. Do you, if you were a wealthy
person, could you see yourself being a C96 collector? I mean, there are some unique little
features, like as far as safety change-outs and hammer change-outs and things like that.
Oh, there's contracts with all sorts of engravings on them. There's all sorts of markings. I would
love to, you know, just for my own records, I'd like to get, if anybody has like an Ottoman
contract one. Oh yeah, the Ottoman 93s. Yeah, those are beautiful. Those were, no, they're
96s. Oh, 96. Yeah. But they're, they have the Tora, we talked about in the last episode. Yeah.
I would love to get ahold of one for photography. I'd love to get ahold of, say, one of the Persian
contracts for photography, because both of them were present in the war. The Persian's being used
by the Germans as well. Yeah. The Austrians had their own contracts with Austrian marks. There's
a lot of ways that you could collect the C96, and yet it's just rectangle gun, like another one of
those weird, bizarre little designs. But I find them alluring. I think they're really cool. Yeah,
very unique. I definitely love shooting them with a stock more than I love shooting them without.
A thousand times yes. All right, well, I think that's guys wrapped up. Pretty much. Do you have
any final words for the crowd? No, I think I'm pretty good. Thoroughly enjoyed shooting these
two. Happy to, happy to have them around for as long as we did. Yeah, as a matter of fact,
because of the mix-up on the other one, we actually have one that's around. We'll have to
decide on what to do with it. Yeah. Well, anyway, this is not the end of C96 history. We are not
doing another episode soon, but one day, one day, we will get into the others like the Bolo and
post-war models. But that's something for another time. I think you guys are probably C96ed out for
now, and we'll get some other content next time around. See you later. Night, guys. Update time,
folks. Our numbers have been dragging lately, ever since YouTube admins came through and decided
something like 10,000 of our subscribers were lies and took them off. So we decided to pull
the trigger on an idea we kicked around for a while, really. Clips, a series that does quick
reviews of facts or factoids taken from our more in-depth episodes. Some of you may have already
seen the first one. If you haven't, give it a watch and leave us a comment on how you feel about it.
I'll leave a link in the description below. Otherwise, thank you all for watching and have a good one.
