Neste vĂdeo voce vai aprender a fazer um macaco em cimento e isopor de uma forma simples e objetiva, descubra o poder da modelagem em cimento: tĂŠcnicas detalhadas para criar peças com reciclagem e vasos em cimento durĂĄveis e Ăşnicos. Aprenda desde a mistura da massa leve atĂŠ o acabamento realista, com dicas para iniciantes e profissionais.
Participe da nossa jornada! Inscreva-se, curta e compartilhe para ficar por dentro das novidades. Deixe seu comentĂĄrio e sugestĂľes â adoramos ouvir vocĂŞ!
Hello my loves, how are you all doing? Is everything really okay? I hope so. Well, I think it's good that you all
stay here with me until the end of this video, because today I'm going to teach you how to make these
The cutest monkeys in the world. Yes, let's get started with the step-by-step? Then come with me!
You will need 90 centimeters of galvanized wire; you will fold it in half like this.
As I did it. At the end of the wire, thinking about the shoulders and arms, I made a fold there.
It's a bit like a shovel. Nothing is very precise, but we can still get a general idea.
about distancing, you know? I took a piece of tape and wrapped it around that wire there, just so it wouldn't keep falling down
Opening it up,ITU's messing me up in the modeling. The dough I'm using is our famous
cement with polystyrene. It's here, make sure to check the comments and video description. I made one
I put it up there on top of the base, took a little more dough, divided it into two parts,
I made two long rolls that will be his little arms. I took the wire and placed it up there, right there.
Project, I drove this wire deep into the concrete, covered it completely, and secured it inside the mass, okay?
Right now we're adjusting everything so that it all fits perfectly in the right size. If it ends up
Too long, we'll remove some. If it gets too short, we'll add more dough. This is the moment to
Fix everything. I brought both of his little hands forward, stuck them together, and made this.
Collage, right? I took a little piece of galvanized wire and stuck it right in the middle of the two little hands
and I closed it, securing it there and adding more strength so it wouldn't break easily. I made a little ball of
Mass, adepends, I stuck it right on his little shoulders there, did all this collage, okay? It has to stay
Nice and snug, and then you place the little mold there. We just need a structure roughly like this.
so we can model it later, okay? I put a little piece of styrofoam down there to place the
Little face up. With the spatula, I made a mark there just to get a rough idea of what I was doing.
You know, right? I took the dough and just filled in that little tail of his right now. You really go all out on this one
go ahead so it doesn't squeak later, okay? Next time I want to use the 316 iron, the one that
We put it inside the heron's neck so it won't break. It's much thicker, maybe it'll fit.
Even better. I waited 24 hours for it to dry before continuing. To make this little monkey suit
People just need to be patient, okay? I made a bit more dough so we can keep going there.
Filling in the tail end, right? I've already done that curve on his tail. Let me explain.
The deal. This particular craft doesn't have many details on the inside, does it? Because it
It has to be hung in the specific spot where you can only see its front side. So I didn't do it.
many details there on the hind pawsâI only added some volume there to suggest they are paws, but
I didn't do many details, okay? And then I finished filling in the tail end, I kept adding the dough
little by little, having that patience to wait for it to dry, to do even more afterwards
I had to be careful. So it all went very slowly. I left that piece drying while I went to make the bananas.
And I don't know where I put that video where I modeled the little bananas. I don't even know if I did a live stream, what I did...
It happened that I don't have this step-by-step guide. I'll explain it to you. You're going to make a little ball,
A croquette, and you gently stretch the bottom part and slightly stretch the top part. Here on the channel
I've already made the cement fruits and there are bananas in there. I'll leave the square box at the end of this video.
How do I make you look? Okay, then go there and watch to learn if it was too difficult.
That's already the next day when they dried, I already made the little holes, right? My little monkey is already dry,
I prepared a mixture using cement, mortar, and a plasticizing additive; it's here at the little shop.
Kiron. It's really good to add to the dough, right? And all the doughs I've been making here on the channel
Here's the link in the video description and also pinned in the comments. Watch it there later, okay?
You can use white cement to line the monkey, or you can use cement mixed with sandâ it's up to you.
This little monkey's modeling became very easy. First, we'll gradually cover it part by part over there.
Just make it neat, no need for it to be too thick either, not too thin, okay? And then...
You, as an Aztec, go ahead and add every single detail, every little hairâdo it however you want, and put your heart into it.
Modeling, right? In that area at the back, I added a bit of clay to make it a bit more...
But it's bulkier, right? Because it's all hunched up over there, so that part is more plump. And I came
Bringing the mass upward, I passed the damp brush, then I made the cracks and the little hairs there with the
This craft is so cool, right, guys? This is delicious, I love handicrafts. And you, do you like handicrafts?
Tell me here in the comments that I want to know, okay? And another thing, you already left my joinha
Here? I need you to do this; in this way, I'll know that you're enjoying the videos I have.
placed. If you watch the video and don't leave a like, I'll understand that you don't like it
Nothing I've been posting is getting any engagement, and I get discouraged, right? You have to like this post here, okay? Subscribe
Also, at the end, please share thisâthis whole thing makes a really cool move for our channel, like that
It will be offered to other people, and they will come to work together with us. Thank you so much, okay?
Ah, I'm so happy to be able to count on you all, after all, this whole thing is ours. Well, let's get back to it.
here for the step-by-step, right? You scribble, scribble, scribble, until you create that entire texture of fuzz, because
That way, he looks so beautiful; I absolutely loved doing this step-by-step tutorial. At the very tip of his hands, I added
Just little fingers, I only did a finger simulation, right? Some little drawings, I know you'll put in effort and it'll turn out great
Nice-looking, your monkey. I added more clay there on the chest area, and I also did some scribblingâit's really great.
Hey, guys. It turned out really great. So that's itâyou should also have a photo, and it'll really help you out.
It's your turn to do the modeling now, okay? I already covered the part of his head there, I was trying to do the entire modeling.
With the spatula, I was drawing his face there, I made two, right? They ended up two with two different faces.
I took a little bit of dough, placed it right in the center of his little face, and made the entire attachment, the whole union of it
That little nose there, just keep looking and you'll understand how I'm shaping it, because there isn't much to it.
What can I say, did you get it? You need to observe how it's done, and I know you'll be able to do it too. The ideal is
You do all this collage, okay? Over there on the nose, I made a little triangle, and then I marked the eyes, right?
Respecting the middle of the nose. Below, I made a little mouth, an opening. With the tip of the stylus, I made two
small holes on the sides, pulling a little upward, because they're his nostrils. I made two tiny little balls for
Put it right there in that little hole in the eyes, where I had made it, right? The depth. And then I kept adding more clay.
to make a small mane. The monkey's mane. And then I started placing the dough there with the spatula and the scraper
I kept making little sketches, and with the spatula still, I gently pulled the dough forward, shaping all the details.
Bringing it forward like this so the little monkey makes complete sense, right? That's why I'm telling you, you need to have a photo.
The little guy. I didn't have any photos at all, and I should've had some, right? So it could've turned out a bit better, but even so, I liked it
Based on the result. So there's a photo so you can keep looking at it and adjusting, more or less, right? Like how he is.
That was my first monkey from the video, and I also made the second one, and I'm going to show you how I modeled it.
Different, right? Now you see which one is easier, and then you model it. This second little monkey was modeled the same way.
The first one, right? Regarding the little body. Now the face, noâthere I already added more mass, with the tips of my fingers.
I sank down there where I place my eyes. I've already done that part of the triangle with my finger too, the one that starts from the eyebrow.
And it goes down to the mouth, right? It turns into a little triangle there, and with the spatula I made that little mark there, depth.
I think if you look at it this way, you'll understand it well, right? I did the mouth part down there, I made the little hole
From the eyes, the same way, right? I put the tiny little balls into the little holes of the eyes, and I made the little holes for the nose tooâsee?
I did the detail of his underwear too, little lines, so it'd look really similar, you know? I think that's the most different thing
What was left there was truly the little face, but in context it ended up looking quite similar. See? It turned out like this, in this way.
I already left it drying while I went ahead and prepared the bananas, right? I coated it with cement mortar, with plaster,
I left all the little bananas drying, nice and neat, so that only the painting part would remain. Speaking of painting, guys,
These brush sets are wonderful; I really want you to get them if you're in need of brushes, okay?
Here at the little shop, yes. Well, the little monkey was already dry; I sanded it, gave it a bath, and applied a white base so it's already ready for painting.
Since I didn't have any photos, I was lost; then Nicole printed one for me right at the end of the painting.
I printed a photo of a monkey for me, and then I changed the colorâit was crazy. But in the end, everything turned out fine.
The paints I useâ they're all available at the store; you have to go there because they're places where I bought them, okay?
Where I indicate you should also purchase it. This black paint I'm using is floor paint, and it's very good.
I love using it. I also use white paint; I buy it in the color "snow white," and I purchase pigments in the primary colors.
I create my own shades, right? Except for black, which I already buy ready-made, and white, but everything else I make right here.
I always finish my paintings using water-based resin; there's a really cheap one available at the little store.
That's what I use, and I recommend it to everyone because I love this water-based resin I bought.
So go check out the store there; there's a link in the description, okay? You can trust it because these are places where I bought my own things.
My loves, for those of you still asking me about the course, yes, it is availableâthere's a link right here in the description.
If you have any questions, just write to me and I'll send you the direct link, okay?
It's really cool, lots of people are coming, working from home.
I always say that the first piece a person makes is the one that will sell, and they can already recover the value of their investment, right?
Because taking the course is an investment and it's very beneficial, so being in a group where we can work together is great.
And I'll see you there, okay?
We have nearly 100 classes coming up, we'll have new classes, we're together, working together, many people working.
Selling, earning some moneyâthis is really cool, and I'm so happy to be able to share all this knowledge with you.
and make you feel good too, right? Just like I feel good with my own sales.
I spoke my piece, right? And the painting went down there, did you watch it?
Well then, I want you to have a photo, and you paint your little monkey in whatever color you want, okay?
As I mentioned, I'm currently finishing up my pieces with water-based resin.
After they dried completely to 100%, I took a string, carefully threaded it through the little bananas there,
I tied a knot between them there to hold the bananas, and left the two ends loose so I could tie them onto the little arms of the little monkeys, okay?
Finally, that's it, my loves, I hope you enjoyed these most beautiful little monkeys in the entire world.
I really hope you do it, because I couldn't even stand being around these monkeys for two days.
Because they sold out quickly, I loved them.
I sold each little monkey for 70 reais, and many people say I sell my things too cheaply.
Ah, I wouldn't really want to sell itâtruly, I just want to have a country estate where everyone can gather together.
Oh well, it would be a dream, one day, one day, in the name of Jesus.
Hey, so that's it, I really hope you all liked it, go ahead and try it, okay?
Mark me so I can see, and it's great to have you all here with me, thank you so much for the love.
Thank you so much for the sharing you are about to do now,
Thank you so much for subscribing to this channel, for leaving your joinha, I truly appreciate it, okay, guys?
Now I'm going to run to prepare a very cool step-by-step guide for next week, and I'll see you here in the next video.
To watch these videos appearing right now, just click on them, okay?
A big kiss, may God bless you both, see you soon, bye-bye!