蘇聯裝甲車輛教學 蘇聯坦克駕駛教學-1.通過自然障礙
墟散羽铮
2粉絲
2026年4月21日
Modern tanks and infantry fighting vehicles, combined with skilled crew operations, possess high maneuverability, dynamism, and traction capabilities.
Note the time it takes for the combat vehicles to reach maximum speed.
After just 50 meters of movement, the combat vehicles reach high speed.
Tanks and BMPs typically reach their maximum speed over 200 meters.
T-72: 8 seconds, T-55 and T-62: 11 seconds, BMP: 7 seconds.
Precise steering drives ensure smooth passage through sharp turns at high speeds.
Reliable suspension and large roller travel enable modern tanks and infantry fighting vehicles to immediately overcome ramps up to 1.2 meters in height.
The high sealing of the combat vehicle's hull allows it to cross water obstacles on foot without prior preparation.
Only a mechanic-driver who is fully proficient, with both knowledge and practical experience in driving, can fully utilize these capabilities.
One of the key conditions for mastering driving is the ability to orient oneself in the environment from the vehicle.
On the T-72 tank, mentally draw a line from the driver's eyes through the slit on the sight device, the apex of the wave-deflecting shield angle, and the centerline of the road.
On T-55 and T-62 tanks, the reference line runs through the center of the sighting device and 45 centimeters from the inner edge of the left track imprint on the road.
Pay attention to the accuracy of track movement along the rut when properly oriented.
The reference line on the BMP runs 25 to 35 centimeters from the inner edge of the left track.
Another important condition for mastering the skill of driving is taking into account the external forces acting on the vehicle.
The tank presses down on the ground with its weight.
The pressure is unevenly distributed along the length of the track's bearing surface.
The resultant of the weight is applied to the soil under the tank's center of gravity, while the resultant of the soil's reaction is applied to the midpoint of the track's contact surface.
As motion begins, the driving wheel starts to pull the track out from under the support rollers, but the track remains pressed against the ground by the tank's weight.
The forces developed by the driving wheels generate pushing forces transmitted to the tank's hull through the axles of the driving wheels and the rear support rollers.
Friction force arises between the track and the ground, while gripping forces occur between the track shoes and the ground.
The resultant force of track-to-soil adhesion determines the movement conditions of the tank or infantry fighting vehicle.
When caterpillars deform the soil, a rolling resistance force arises.
When starting to move, an inertial force arises.
It always points backward and hinders acceleration.
The greater the rate of change in speed, the stronger this force becomes; therefore, when starting up, the fuel supply must be increased.
Under uniform motion, this force is zero.
When braking, the force of inertia is directed forward.
It helps overcome difficult sections, regardless of the ground conditions.
Note the magnitude of the distance traveled by the tank under the action of inertial force.
The greater it is, the higher the speed and the lower the rolling resistance of the ground.
Frequent irregularities significantly reduce the average speeds of tank columns.
Therefore, one must skillfully overcome them.
Pay attention to the severe impacts on the frame and the roller travel limiters when negotiating uneven terrain incorrectly.
Let's see how we must overcome them.
At the moment the front rollers touch the ground, sharply increase fuel supply to soften the impact.
At the moment of impact of the front rollers on the irregularity, fuel supply must be increased.
Note the absence of hard impacts against the hull during correct tank driver operations.
During straight-line motion, the resistance to the machine's movement depends on the structure and condition of the soil.
When the combat vehicle turns, its tracks cut into the ground.
Excavating soil creates additional forces that resist rotation.
To overcome these forces, fuel supply must be increased.
Depending on the speed and sharpness of the turn, a centrifugal force arises.
The greater the speed and sharpness of the turn, the greater its magnitude.
When the direction of rotation is changed, the centrifugal force also changes direction.
When the centrifugal force exceeds the value of the track-to-ground traction forces, the machine skids sideways.
A firm turn reduced the prominence, excluding the gus machines.
On loose ground, one should turn step by step, as the T-72 tank driver did.
Make the turn in one pass on flat sections with firm ground.
The T-55 driver's error caused the engine to stall in a ditch due to the high resistance of the soil to turning.
A correct choice of turning point and speed ensures not only a fast but also an accident-free passage.
Pay attention to the correct execution of the turn by T-72 tanks and BMPs on the outer side.
When considering the forces involved in climbing, it is convenient to use the components of the gravitational force.
When moving uphill, an additional force arises that tends to push the tank backward.
Its magnitude reaches 1.6 times the weight at a 10-degree incline, and 1.2 times the weight at a 30-degree incline.
Therefore, the fuel supply must be increased.
The force pressing the tank onto the ground decreases, the traction between the tracks and the ground diminishes, and the risk of track slippage arises.
On a steep descent, the component of gravity accelerates the tank.
Therefore, there is a need to smoothly slow down the vehicle.
Accelerate the vehicle to utilize inertia when overcoming steep, short inclines.
You can shift into the highest gear one step before the descent, if the road is flat during the descent.
When the reserve of inertia is almost completely exhausted, increase the engine thrust by shifting to a lower gear.
Switch quickly.
If the driver fails to engage the lower gear, the vehicle rapidly gains speed under the influence of the rolling force.
You need to stop the car with the clutch disengaged and then resume driving.
The T-55 tank driver shifted gears in time and began moving, so the backward rolling did not occur.
If the traction between the tracks and the ground is low, the machine will skid.
The vehicle should be braked, then quickly maneuvered from the spot using the control levers and the incline should be overcome by changing the direction of travel.
Long and steep descents should be negotiated in the lowest gear.
Maintain a constant speed during descent, do not shift gears, and do not brake abruptly.
The car skids and loses control during abrupt braking on a downhill slope.
When moving on a slope, the weight force is redistributed on the track.
A lateral deviation force arises in the tank or BMP.
The steeper the slope, the greater this force.
Turning into the direction of the incline is often impossible.
In this situation, one should act in the following way.
Reverse the vehicle to the side of the slope, stop it, and then resume driving forward.
Notice how the tank cuts into the ground when moving sideways.
This usage is dangerous.
Drive the vehicle evenly up the slope at a low speed and without sharp turns.
The BMP driver is acting correctly.
Highly skilled mechanics and drivers are a crucial condition for fully utilizing the capabilities of combat vehicles during marches and combat operations under various conditions.
