Nuclear Radiation Explained | Alpha, Beta & Gamma | GCSE Physics

Basic Applied Science
14 followers
3 Video Views·Apr 4, 2026
Nuclear radiation is the energy released from unstable atomic nuclei as they decay to become more stable. This process is called radioactive decay.
When an unstable nucleus decays, it fires out alpha, beta or gamma radiation.
What are the three types of nuclear radiation, and what are the dangers and uses?
Firstly, an alpha particle, made of two neutrons and two protons,
basically a helium nucleus, with a mass of 4 and a charge of plus 2.
When a nucleus is too big, it emits an alpha particle to become smaller.
An alpha particle is ejected at about 5% light speed,
and has enough energy to kick electrons from atoms, turning them into ions.
Alpha is the most ionising, creating 30-50,000 ions per centimetre of air.
But being highly ionising means it quickly loses energy and stops,
giving it the shortest range, of about 1-5 centimetres in air, and it can't pass through skin.
Next is a beta particle, basically a fast electron with a very small mass,
and a charge of minus 1.
When a nucleus has too many neutrons, it turns one into a proton by emitting a beta particle.
The beta particle is emitted at about 60% light speed.
The beta particle is less ionising than alpha, creating 50-100 ions per centimetre of air.
But because it loses energy slower, its range is larger than alpha,
about 1 metre in air, up to 2 centimetres in living tissue, or 3 millimetres in aluminium.
Finally, a gamma particle, the highest energy electromagnetic wave or photon,
which is massless and chargeless.
When a nucleus has too much energy, it releases a gamma ray to get rid of it.
Gamma is the least ionising, as little as 3-5 ions per centimetre of air.
This gives it the longest range, hundreds of kilometres in air,
tens of centimetres through living tissue, and it's halved in intensity by 1.2 centimetres of lead.
Here's a summary of the three types of nuclear radiation.
Now, what are the dangers?
There are two types of danger.
Firstly, irradiation, when the radioactive source is outside your body,
or contamination, when the radioactive source is inside your body.
Alpha danger, when an alpha source is outside the body,
because alpha can't penetrate the skin, there is little danger from irradiation.
But if the alpha source enters the body, the high ionisation rate causes
huge localised damage to living tissue, posing a severe contamination danger.
Beta danger, unlike alpha, beta radiation can penetrate skin,
although generally it doesn't reach internal organs, posing a moderate irradiation danger.
If the beta source enters the body, the higher penetration causes more spread-out internal damage,
posing a lower, but still moderate, contamination danger.
Finally, gamma danger.
Gamma can penetrate deep into organs, giving it a high irradiation danger.
However, from inside the body, because gamma is most penetrating,
most of the gamma passes out of the body, giving it the lowest contamination risk.
Here's a summary of the dangers.
Now, what are the uses?
Alpha use, smoke alarms.
Inside a smoke alarm is an alpha source and a detector.
When alpha is detected, the alarm is silent,
but when smoke enters and blocks the alpha, the alarm is triggered.
Because alpha has a 5cm range in air, it is safe for home use.
Beta use, measuring thickness of objects.
Take a sheet of paper.
A beta source is placed on one side and a detector the other.
A sheet of paper with the desired thickness may absorb 50% of beta particles.
But thicker paper would absorb more beta, and thinner paper less beta.
So then thickness can be tested without any physical contact.
Gamma use, medical imaging.
A gamma-emitting source is injected into the patient, which then spreads into the body.
Gamma rays then leave the body where they are detected,
and a 3D image can be formed of the inside of the patient.
So that's nuclear radiation explained.
If you enjoyed the video, please like and subscribe.
