Creating 'Robocop': Special effects then and now | Behind The Scenes

Behind The Scenes
14 followers
Apr 3, 2026
AI Generated·May contain errors
If I had enough money to buy the materials, that's as much as I needed.
I thought I was doing a cartoon until I saw that first really rough, rough, rough cut.
I was like, oh my god, it's great.
I would get the, what the studio would consider to be the oddball project,
something that didn't really fit into the traditional kind of generic frame.
And RoboCop was certainly one of those pictures.
I'm the production designer, and my job was to sort of give a look to the picture and keep,
what I always feel is to keep a cohesive look to the picture.
There was a constant in design, very brutal, cold architecture.
You'll see there's a constant line of concrete wherever we go that's just boring but linear
and kind of visually interesting and structural to me.
It's clean, so there's no information that you don't want to see.
Let's say you're shooting people at the base of the hill and you want to put a castle on that hill.
Well, you could build one, right?
You get a prop and put a lot of money into it.
Or you could hire a very good matte painter, a man who could take a piece of glass
and then paint at the top of the glass that castle,
and then you would actually put the frame of glass in front of the camera and shoot your live action.
Rocco Gioffre, who did the matte paintings for RoboCop, had a different technique.
He didn't like to use glass and he used masonite, masonry boards,
and he would paint right on those,
mainly because he was always dropping the glass and breaking the glass mats.
So a matte shot, in the traditional sense, the oldest way to do it,
is a controlled double exposure where you shoot the live action,
you're blacking out part of the frame, and black represents a lack of exposure.
You go back in the darkroom, rewind that film,
and reload that on a pedestal-mounted locked-off camera that's pointing at an artwork easel,
and that artwork easel contains your matte painting,
which is black now in the complementary portion of the frame,
and it fits together like two pieces of a jigsaw puzzle.
And it takes a certain number of tests, usually about four to six camera tests,
before you get your painting to blend properly with the live action.
In a situation with an architectural matte painting,
you usually try and find areas that you'll be able to hide your blend in,
and you go along with the architectural lines as best as possible.
I'd rather cut into the set and paint a portion of that back in,
because more often people are looking for a matte line on the
outside perimeters of the set piece, not within the set itself.
They were going to be shooting in Dallas, Texas,
and they wanted it to look like Detroit in the near future.
Bill Sandel, the production designer, and John Davison and Paul Verhoeven
had singled out the City Hall in Dallas,
and they wanted that to be the base of an 80-story skyscraper for their OCP building.
And so together we came up with an idea of the thing
looking kind of like a big arrow that was stabbed into the ground.
There's a wide shot of Delta City when RoboCop's car is driving away from camera,
and we actually shot across the bridge to crossing an area there,
and we matted into the existing cityscape,
the OCP building, and other futuristic structures.
John Davison specifically singled out his favorite shots in Forbidden Planet.
He wanted the thing, especially the down angles,
to just plunge infinitely, you know, and just have this incredible depth.
I believe there are only two matte paintings in RoboCop
that aren't done completely in-camera on the original negative,
and those are the elevator shots,
because we needed to reduce the interior of the Plaza Americas
to make it smaller and fit within that gigantic 80-story interior look.
So those were optical reductions.
Optical reduction is when you take something of previously shot footage
and actually reduce it in size to usually put it into something like a matte painting.
I'm responsible for the fall at the end of the film
where Dick Jones is falling toward the street.
Dick Jones is an animation puppet,
a two-foot tall human animation stop-motion puppet in that shot.
With a human being, you don't want to have him
standing at attention with his arms at his sides.
You want something that's going to be more in keeping
with what he's actually going to be doing in the scene.
And in the case of Ronnie Cox falling,
he was falling spread-eagle and kicking on the way down,
so I had his arms out to the side,
and a slight crouch on him is how the sculpture was done
over the top of the armature with plasticine clay.
And that finished clay sculpture, you'll make a plaster mold.
The clay is thrown away,
and the armature is taken back down to bare-bones metal again.
That empty armature is placed inside this mold
that's been cleaned out and scrubbed,
and those two halves are again put back together.
The foam will be injected into the mold
when the two halves are joined together with the armature inside of that.
And that, in turn, is baked like a cake in an oven
at 350 degrees for a number of hours
until the moisture is evacuated from the foam rubber mixture,
and the thing is allowed to cool down.
You pull the two mold halves apart,
you end up with a rubber puppet,
a very nice soft foam rubber puppet that's a likeness
from the clay sculpture that you did,
and then it's up to you to clean that up,
paint the thing, put in some eyeballs,
and dress it up in the three-piece suit.
This is, you know, just a typical example of an old-fashioned stop-motion puppet.
It's either hinge joints in some places,
or ball and socket joints.
I'm just going to crank this open
so you can get a look at, typically,
what a ball joint looks like here for stop-motion.
You have 20 seconds to comply.
Since RoboCop was effectively a man in a suit,
ED-209 could not be in any way a man in a suit.
So that's one of the reasons we chose to offset the hips
or do things that would be clearly impossible
for a person to fit in that.
That's why his hips are so far apart.
It's one of the reasons there's rails.
The joints don't have a standard, you know, knee joint.
They've actually got a linear rail kind of a system
that's, again, one step further away from a person in a suit.
I felt that they knew so much more about it
than they came with the proposal.
Then when they came with proposals,
I could easily say,
OK, but then do this, you know.
If we do it this way,
then let's make this strange thing they had built,
which is a gray area,
let's make that the eyes, the whole eyes.
These are the eyes.
There's hundreds of eyes.
Basically, whatever it is, they can see through that.
Not by a little camera on the top of his head, you know.
For the inspiration for ED-209,
we drew upon kind of a number of different areas, you know.
Tried to try something in the natural world.
So killer whales were something
that had a pretty menacing kind of a countenance.
Everything is kind of an excuse.
You know, there's a big air intake,
and it looks a lot like a mouth.
And there's this big dome
that you can't really see where the eyes are.
The idea there was that this would be
maybe like an anti-laser surface.
This is kind of the maquette stage,
and it really is pretty instrumental.
The last kind of, last round of design
until you blow this thing up to full scale.
This is like, basically, it's blue foam.
It's house insulation foam.
You know, you take that.
It's cheap and stuff.
And you can mix with my favorite toothpicks
and soda straws.
You kind of build a little version of the robot
that you can talk about.
The leg, you know, upper leg would be here.
It could pivot.
And then also, in order to take a step,
the guy could actually shoot his leg forward.
And then kind of, as he's walking forward, do this.
So that was pretty critical.
You could see through it.
There were lots of moving parts.
There was a big screw that would be responsible
for moving the leg up and down.
And then like on the back here,
a little bit of a plate, the screw access.
And we figured, since we're going to have a screw
that's in there turning, we might as well
put a detail on there.
So I modeled the end of the screw
to look like one of the axles you see on a railroad car.
So as the guy's actually moving,
you see these little things spinning.
The full scale Ed 209 was a design
that Craig had come up with,
working with Paul Verhoeven and myself
and trying to get something that Paul was happy with
as a character, a nemesis for RoboCop.
The crew that we were building at this time,
Pete Ronzani, Neil Breitbart and Paula Lucchesi,
my girlfriend at the time,
we pretty much built that thing together.
And it was hell, but it was one of those experiences
you come through.
And at the end of the day,
something I'll always remember.
Later on, we'd be married.
And so I guess it didn't really split us apart.
All the forms were built up out of wood.
You know, we used a lot of plywood,
masonite and just fur
and actually kind of built up patterns
and stuff bit by bit.
We used a lot of plastic forming techniques
and fiberglass techniques.
Seeing how it was basically the middle of summer
in San Rafael, we were pretty much in hell
up to our ears and fiberglass
and wearing these suits
because you have to wear these protective suits
and respirators and everything else
while it's just blistering hot.
It's a pretty tough portion there.
One of the keys with movie props
is they've got to be pretty flexible.
You have to be able to put this thing together
and take it apart in relatively short order.
And actually that's one of the things
I'm pretty proud about
was the model was held together
with bungee cords, snaps and different techniques.
So basically two people could take the thing apart.
We were pretty much left alone.
In fact, for the full-scale prop,
you know, I don't think Paul saw it at all
until it was delivered, you know, in Dallas.
That was pretty cool.
I felt pretty trusted.
Phil Tippett would check in on us
on a periodic basis,
come over and see what we're doing
and just kind of roll his eyes
at the mess we were making and stuff.
You know, our hearts were in it so much
that, you know, compensation
even wasn't necessarily important.
Just, you know, contributing
to this whole kind of process
was really the motivation.
The full-scale prop was essentially
just that, a prop.
You know, it was capable of being posed.
The head could be swiveled, you know,
from side to side.
The arms were able to be pivoted.
We could rotate them down or rotate them up.
But it was really the kind of thing
that had limited, very, very limited motion.
Because of the size of the big guy,
his head was so big
that even though we made this
pretty reinforced fiberglass mold,
it still sagged a little bit.
So when you see the big one
compared to the miniature version,
the miniature version is built
exactly off the pattern for the big one.
But when we molded the big one,
it squished just a little bit.
So the big guy's head's
just a little bit fatter
than the miniature version.
And actually, it's one of those things
that always bugged me
when I saw it in the film
because I recognized
they were a little different.
But what are you going to do?
Phil Tippett is the man on RoboCop
who actually animated
the stop-motion puppets for ED-209.
This is the stop-motion miniature
of the ED-209 puppet
that has an articulated stop-motion
skeleton or armature in it.
Part of it's actually visible here.
You can see this lead screw mechanism
that was part of the design
that Craig Hayes had come up with.
Then they've made a number
of miniature puppets
that were articulated
and had little skeletons
inside of them of metal
so you could pose them.
And then this was done
through stop-motion animation.
Every little aspect
of this particular character
has got an armatured,
jointed part that allows it.
And shooting one frame of film
can, depending upon
the complexity of the shot,
take anywhere from 10 minutes
to an hour and a half,
adjusting everything properly
for one frame of film.
You get your camera,
you take one frame,
stop the camera,
go on to the little stage,
move the arm an infinitesimal inch,
go back behind the camera,
shoot another frame,
one frame at a time.
Most of the work for ED-209
was stop-motion animation,
with the exception
of the staircase scene,
and in particular
when he falls down the staircase.
The staircase that ED-209 fell down
was a four-foot square miniature
built of plywood and brass
and the usual kind of
model-building materials,
reinforced so that when the guy
fell down the stairs,
it didn't shake the set too much.
Phil did all the kind of
masterminding of exactly
how we were going to do that,
what angle the set would be at
to get the best roll and everything.
And then we rigged up the puppet
with a pin in his foot.
And when we said go,
camera was rolling at speed,
we'd pull the pin and the robot
would tumble down the stairs
and off the edge of the set.
I was the one catching the robot
because I was the one
who had to fix it up
for the next take.
So I wanted to make sure
as little stuff broke, you know,
so I'd be down there
trying to make sure the little thing
didn't hit the ground
and break off an important part
and then I'd have more work to do.
I came up with this technique
that Craig Hayes helped me with
where I thought,
you know, I don't want everything
to go through like a
secondary optical pass.
I want everything to be
on the original negative
if that was possible.
For ED-209's machine guns,
we rigged up photographic flashes.
And then while I was animating
the ED-209,
you animate one frame at a time,
one frame at a time,
getting ready to cock his guns
or whatever.
I took some Minolta flashes apart
and rigged up a system
where we could put
the actual flash tube
into the tip of the barrel
of ED-209's gun.
And backwind the camera one frame
and turn all the lights off
on the set.
And then we would take cotton,
take some, you know,
colored plastic gel,
wrap some orange around the thing,
and then take some cotton
and sculpt what would look
like a muzzle flash.
They'd go off.
So that you get this thing
that looks like a burned at,
burned in kind of a muzzle flash.
I put like tons of diffusion
on the camera too
for those particular frames,
not the rest of the stuff,
but just for the frames
where the flashes were going off.
So it didn't look like cotton.
It looked like more
of a diffused flash.
And then I just like randomly
put different shapes in the cotton.
So it had the characteristic
effect of gunfire.
It was a pretty interesting technique,
but because of the high voltages,
you know, involved in the sort of
somewhat, you know,
movie-ish quality of the wiring,
occasionally they'd get
a few thousand volt shock.
I'd be like working away on the thing
and he never insulated
these things well enough.
I'd be like right in the middle
of doing this thing
and you hear the scream.
I was just going to get like these,
you know, whatever,
10,000 volts going through me.
It was really wild.
I'd been through enough shocks myself
that I kind of found it amusing,
but I don't think they appreciated
that at all.
And it's very clear
and you get electrocuted.
And this is a shot where we actually
made a little miniature Robocop.
So this was a stop motion Robocop
that grabs the gun
and Ed-2 and I is firing
as he gets his arm
pointed over to his own arm
and actually blows his arm off.
This was kind of an interesting shot
to achieve because of the way
the robot, it's one of the things,
the limitations of the robot,
he actually technically
couldn't shoot his own arm
because his head was in the way.
So we ended up sort of cheating
and you don't see it in the movie,
but we unhooked the arm
and just kind of pulled it out
to the point where he could do it.
And, you know,
it's all a big phony thing.
So this shot of him
launching his missiles,
he had his giant blown off arm,
which was a practical part
that built out in San Francisco.
I had to fly it out to Dallas.
And I remember as Phil
and I were going out there,
I had this big giant
blown off robot arm
wrapped in some paper and stuff.
And they asked me what it was
at the airport.
I didn't want to say
it was a big giant
blown off robot arm.
So I said it was a planter
and they said, OK,
let's put it in there.
It's hard to imagine these days,
you know, getting a giant
blown off arm, you know,
through any kind of airport security.
But back then it was like whatever.
I thought for sure
that I'd be able to continue
doing matte paintings
with a paintbrush
and camera trickery
for the rest of my life.
Since Robocop,
yeah, the industry
is visual effects in particular
have changed so radically.
In the digital world,
you're in an arena
where you have your frame
and you can do anything
you want with it.
You don't have to go
have a separate camera
shoot something else.
You can create it
in the digital world right there
and you can put it
into the frame right there.
With the advent of
computer graphics
and Photoshop matte paintings,
the cut and paste methods
and just using photo collage,
matte painters could
for the most part
start coming out of the woodwork.
People that couldn't create
a realistic painting
with their hands
and with a paintbrush
were suddenly there.
There's just like tons
of matte painting artists now.
There's a completely different
realm of equipment
that's necessary
and the accessibility of course.
These days,
visual effects are done
in a variety of ways.
You can create something
completely from scratch
in the computer,
build 3D models
and light them and so forth
and do that all
entirely in the machine.
You can go to a store
and you can buy
the software,
the hardware,
you know,
most of the stuff
that you would need
to actually do visual effects.
I don't know
if there really is
a need for
doing stop motion anymore.
Stop motion animation
is still around,
but certainly
in a far diminished capacity.
In regards to
doing visual effects work,
I think it's,
you know,
it's been replaced
by computer graphics
pretty much.
I found that
by the late 1990s,
by 1997,
that early in that year,
that for the most part,
any phone call that I got
requesting a matte painting shot,
they wanted to know for sure
that I was doing it
with computer graphics.
It's a completely different world.
That's the way of Hollywood
and the film industry.
The technology only reflects,
you know,
what's current
and it's constantly being replaced.
You can watch the film nowadays
and the shots do hold up.
One of the biggest compliments
for me on the whole project
was when my friends
who really didn't understand
what we did
would come over,
walk up to this thing
and kick it
and it was hollow.
They'd be shocked,
you know,
they thought it was
a four ton giant robot
that we had built.
They're actually artists
who happen to be working
with very sophisticated
special effects.
