Quick Silver Necklace - DIY Jewelry Making Tutorial by PotomacBeads

Handmade Jewelry
2 followers
101 Video Views·Apr 3, 2026
AI Generated·May contain errors
Hi, I'm Allie. Join me in making this quick silver necklace. If you look and watch in the video,
you'll see some helpful hints how to attach and make this lay correctly if you love the
asymmetrical design. If you don't, keep watching because I'll give hints of how to create just a
single design necklace as well. So to begin, I'm going to take my two hammered rings here,
and those are 20 millimeter, and two of my four millimeter round Larimar J beads. I've got my
Potomac's drops here, the Helix beads, as well as the Potomac pearls that we're working with with
11OC beads. Again, if you need the full materials list, check out the description below. If you're
on a phone, click that little down arrow. You can see all of that information there.
So the first thing we're going to do is join our two hammered rings for a little bit more of an
extended lariat design. I have on here some .006 beige thread with a size 10 needle, and I'm going
to be doing figure 8s to connect these. So you want to think the Larimar is going to sit in the
middle here, and we're going to do basically a figure 8 worth of beads to connect. So because
I'm knotting everything on, I'm just holding the end of my thread here, and I'm going to add
a total of 12 beads onto my needle. So there's my 6, 7, 8, 9, 10,
11, and 12. Once those 12 beads are onto the needle, I'm going to let them fall down
toward my hand, again holding this. If you want to use a stop bead, you can. That's fine. And what
we're going to do is get ready to tie this to our first loop. So to tie to our loop, I'm going to
drop the ring onto the end of the thread here, not overthink it, and we're just literally going to
tie a loop. What that's going to do, as you can see, is create a little seed bead loop connecting
the two rings. So going to the end of the thread here, right over left, left over right, just doing
a nice simple tie. We'll go in then and reinforce this as well, but what we're going to do now
is to create that little figure 8. Add on your 4mm Larimar bead, and you can choose to keep,
or to use other beads as well to keep that in mind for these nice simple designs. And then once again
repeating that 12. So we're going to go in and 3, 4, 5, 6, 7. Alright, and now that we've got
those 12 beads on, let them shift down on my thread. We're going to grab our next loop, sew through
our loop, sew back through that Larimar bead, back through our blue bead here, give a nice pull,
and see how that figure 8 keeps those two together. Now we're going to reinforce this,
and we're going to go back through this row of our 12 beads that we did originally.
You want to make sure that you don't miss any beads as you're connecting them on,
and sewing through. Once you're out those 12 beads then, we're going to go back up to
and through the Larimar bead, and that gives us an opportunity to pull this thread a little bit
tighter, making sure there's no loops between that figure 8 there. I want you to reinforce
our thread and needle through the top loop here, and then very simply, once you have your thread
and needle down through all of these beads, we're going to bring our threads together,
simply tying a knot, and then burning off the thread ends. Down through we go, once again
through that Larimar, and out right after that gemstone. Take our needle and thread now, because
the thread ends right there, you're just going to tie, tie again, and that is our first connection.
We're going to do two connections, and we're going to repeat the exact same thing. So that's
our first two connections, one more connection, 12 beads on one, 12 beads on the other. So once
you're done with that beautiful connection point here, where we have those two loops of that figure
8, you can do one if you want to, we're going to get ready to add some fringe down on the design.
Now I'm going to do it very, very simply in this same technique that you just did, so you don't
need a lot of thread or needle skills for this. 12 beads go on, and then I put my helix, my round,
my pearl, my crystal on. One 11OC bead in between each with an 11OC bead at the end. I'm going to
put the end of my thread through the ring, take my thread and needle now, go back up through, skipping
over the last 11 that I just added there, we're going to go back up through the crystal, seed bead,
pearl, so we're going back through that line of our fringe that's hanging down,
and then once I'm through that line of fringe there, through all four of those beads with the
11s between them, I'm going to pull that up nice and tight towards my seed beads, I don't
want to waste a ton of thread, take my thread ends, simply tie them together. This is oh so easy to do.
This is also a great design to use some of your leftover materials as well from either
previous boxes or completed projects, you know when you have just one or two things left over
and you're not sure what to do with it, this is a great design for that. Make sure also you can
comment below and give your feedback on things that you've done in this same technique. So there
we have it, very simply again, I'm not even going to worry about reinforcing, putting another strand
of thread through, because it's fairly lightweight. Your thread burner or your threads up is going to
be a great friend for this design. Those go down just like I burned at the top, and now I have my
first little hanging down fringe piece. I'm going to do this now two more times, creating just longer
pieces of fringe as I go on, like the sample here, adding them to the base ring of this design.
So to begin the next step of the design, I've already attached it so you didn't have to watch
me string beads for 15 minutes, and just like we did with the original loop, I made a loop of 12,
tied that into a knot, and continued with about five feet of our beading thread with a very simple
pattern. So this is connecting to our first ring, again 12 beads go on, and then I have a pattern of
my helix, gemstone, pearl, and then my drop, followed by five 11-0 seed beads as a spacer,
and then a helix, one 11-0, and my gemstone. Five more seed beads as a spacer, and then I start to
repeat that pattern, which that pattern is mimicked from the drops in our original design, so it's
going kind of full circle around the piece. Now we are going to be connecting to the second ring now
with the end of the other side. So I've gotten to the other side here, and you're going to need this
long enough to go over your head since it does slip over your head here, so you're probably
going to want about 24 inches worth of beads to go over top of the head. Skipping over that first
ring that we are currently connected to, you're going to skip to the second ring. So through the
second ring after those 12 beads are added on, take your thread through, this is enough thread
for our second strand, and we're just going to once again tie a knot. So the ease of this project
and the amazing thing is I'm going to be really excited to see everybody's designs because there
are so much included, especially if you've gotten the box already and you have these supplies,
to make this your own. So tightening this up here, we'll make sure we don't have any extra thread
showing throughout the rest of the project, just tie some overhand knots and get this thread tied
off. Once you have this thread tied off just like we did previously, you're going to go in, burn off
that thread edge, and then if you want to, you can go ahead and do a second strand. I'm going to hold
up and show you how this first strand looks in case you want to just stop at one, or continue
on with the second strand to get more of that asymmetrical kind of pop. So if you want that
single strand asymmetrical look for this long necklace, and again you have so many beads you can
make it down opera length, you want to do 32 inches, you can certainly do that length as well.
I'm going to continue on now, so stay tuned and watch and show you how I'm going to do the second
strand and the pattern for that one as I go in and attach to the top ring and the bottom ring as well.
If you've continued on to the second side, I've done a pattern of five seed beads in between three
out of the four of my beads, so I have the pearl, helix, gemstone, and then repeating pearl, helix,
gemstone over and over and over again. I'm making the second strand the exact same length as the
first strand, and once again making a loop of 12, tying that off, continuing on down here to the
bottom, 12 after my last beads here. I'm going to take them through the loop here, and if you want
to, you can take your beads up and your needle up through the next gemstone, up through the next
couple beads to make it a little bit easier on yourself to tie the knot. I'm going to come with
my color beige, so this is kind of a helpful little hint here at the end, and pull that out near the
pearl and right after it, because that way that color is going to match exactly as I go in and tie
off this thread. If you need a nice little knot to work with, if you're working with thread maybe for
the first time, you can also do this with beading cable or beading wire. You're going to go in, make
a loop there, sew through the loop once, sew through the loop twice. It's going to get you a nice little
sewer's knot, give a nice tight pull, sew away from the knot, this is good bead weaving knowledge here,
and then burn off that extra thread, burning down towards the project. That's going to finish up
your liquid silver design here, and I want to show you then how it's going to hang as well.
So you have a nice design, there's so many variations of it. Please, please, please comment
and let us know how you varied it. That really helps out the amazing community of beaders that
are watching this video. Thanks again so much for joining me in this quick silver necklace. Remember
if you haven't yet checked out the supplies, because you don't have the bead box, you can check
out information as well as the supply list in the description below. If you're on an iPad or phone,
you can check that little down arrow box right under the video here, and you can get all those
details. Thanks again so much for watching guys, and stay tuned for the next video.
