DIY Romantic Gown Pattern Available

Fashion Apparel
178 followers
3 Video Views·Apr 2, 2026
I finally made my dream gown, and today I’m bringing you a step-by-step tutorial on how to create this deep V romantic gown with a dolman sleeve. This design is elegant, timeless, and surprisingly beginner friendly.
AI Generated·May contain errors
Hi everyone! Welcome back to my channel. I'm Tracy and if you don't know me, I have a passion for
upcycling clothing and I teach sewing on here. This is the dress that I made for Sevilla and
you guys fell in love with it so I'm so excited to finally share the sewing pattern for this
romantic gown. As always, I made a digital sewing pattern for you guys and that's available on my
Etsy or my personal website where you get 15% off because it's a new sewing pattern. FYI on
the sewing pattern, it's going to be a lot of pages to print out if you print it in A4 or letter
size. So try to print it in A0 because the back skirt is like a full handkerchief circle skirt.
And to create this dress, you're going to need about three to four yards of any woven fabric.
I upcycled the tablecloth and it was like a heavier weight cotton with like an embroidered
texture and as a detail, I decided to add some rigid lace. And you will need some loops and
your choice of buttons just to create the center detail. And you need an invisible zipper and a
hook and eye just for the center back closure. So I hope you guys enjoyed the tutorial. For the
digital sewing pattern, you're going to be printing this on either letter size A4 or A0.
Mine's letter size. So you're just going to be taping and matching up those stars. So those are
just the intersections for the pattern. So you're just going to line everything up against that. So
feel free to cut along those lines together, but I feel like it takes so long. So I just overlap
and tape. So each row is a different letter. So you have A, B, C, etc. And then you have pages one, two,
three. So you're just going to be taping those pages in that order. So just matching up those
stars. And now you can just cut out your pattern pieces. Don't forget that on the digital pattern,
you can just select your size and only print that size out. So you don't have like lines everywhere.
Don't forget to wash your fabric and iron it before you cut out anything. Cotton fabric
specifically is known for shrinking after the first wash. So just make sure you wash your fabrics
before cutting them. The back skirt is a handkerchief styled circle skirt that is cut on the bias.
So just follow the grain lines on the sewing pattern and just cut out your two back skirt
pieces. So you end up with two half circles, one right and one left. They will be joined at the
center back with an invisible zipper. And because I wanted to keep all the scalloped edges for the
hem of this back skirt, all but one side ended up being scalloped. So I ended up just following
the original scalloped edge and creating my own scallop to mimic the original. I follow all the
grain lines on my sewing pattern and because my skirt is cut on the scalloped edge, the front
piece, I'm just lining up that hemline on the straight grain along the scalloped edge. But if
you don't have a scalloped edge, just feel free to add a half inch seam allowance and you can just
do a regular hem. I always prefer to use a rotary cutter just because when I cut out my fabric,
I just get smooth edges versus just jagged edges with scissors. Don't forget to mark your notches.
I always prefer to use a fabric marker than cutting into my fabric. For the front and the
back bodice pieces, I decided to piece some lace to my fabric. So I went ahead and just patchworked
everything first and then I cut out the front and the back bodice. I really love the scalloped edge
so I decided to just patchwork it right on top of that lace to just have it at the center front.
So that's how I did it and I joined the two pieces with a zigzag stitch on the sewing machine.
Because my lace is sheer, you're going to see that seam allowance underneath so I decided to just add
like three quarter inch lace trim just to stitch it on top to be able to cover that seam. Take your
back bodice and your front bodice pieces and place wrong sides together. Pin along the shoulder seam.
We're going to be sewing a french seam. For the french seam, you sew wrong sides together with a
quarter inch. Trim that seam allowance to an eighth of an inch and then you place right sides together.
Pin along that seam again and sew with a quarter inch and that's pretty much a french seam.
Now you can overlock the underbust of the front and the back cups. So just take it to your overlock
machine and overlock those ends just so nothing's raw on the inside. On the front and the back
underbust on the cups, I indicate notches where you need to gather. So just take it to your sewing
machine and do a regular straight stitch. You can pull on the bobbin to start gathering
but I like to use a ruffler foot so this just gives me even pleats when I am actually sewing.
After gathering your bodice, place right sides together and I've indicated where that armhole
notches so from that point to the end you need to pin that armhole and sew with a half inch
seam allowance. Take your front yoke pieces and overlock all the way around so you don't have any
raw edges. Take your fabric loops or your elastic loops. I'm using this elastic loop trim and I'm
placing it along the center front of my wearer's right side. The loops are facing away from the
center front because when we add the lining the loops will get turned to the other yoke.
Secure them with a straight stitch on the sewing machine. Take your back yoke pieces and place
right sides together and match up those side seams. Pin them in place. Repeat with the lining
and just sew with a half inch seam allowance along those side seams and now I'm overlocking
that seam because I completely forgot to overlock all my pieces before I sewed them together so
don't forget to do that. Along your main yoke pieces, mark that intersection of your half inch
seam allowance from the under bust and the center front so you know where to pin your cuff. Take
your cuff and place right sides together onto your yoke and match the front of the cuff to that
intersection that we marked of the seam allowance on the yoke because when we attach the lining
everything will get encased really nicely and you'll have a really smooth center front and match
up the side seam with the armhole. Line up your front and your back notches on the under bust.
After pinning your cuff to your main yoke, take it to the sewing machine and just baste it at a
quarter inch seam allowance. This will make it easier when you're attaching the lining so nothing moves around.
Take your yoke lining and line it up to the under bust seam so you're pretty much just
sandwiching that bodice piece in between the main yoke and the lining yoke so just pin across the
under bust. Now you can take it to the sewing machine and sew with a half inch seam allowance
and don't forget to back tack. Then I overlocked the seam allowance. I forgot to just overlock all
my pieces ahead of time. Turn it right side out and just give the yoke a good press. I'm doing an
understitch along the lining catching that seam allowance and about a sixteenth of an inch away
from that seam just so the lining doesn't roll over. This is what the cuffs look like and now
to finish the center front of the yoke. Place right sides together and pin along that center front
so you're going to be encasing those loops. Sew with a half inch seam allowance. Repeat to the
other side and on this side there's no loops. We're going to be attaching buttons later.
I like to trim the top corners just so there's not that much bulk when I finish sewing and turn it
right side out. Turn it right side out and you end up with a really nice finished center front
and you can see the loops stick out. This is what the back and the front skirt look like.
It has such a beautiful drape and now we can actually attach the pieces at the side seams.
Take your front and your back skirt pieces and just match them up at the side seams.
So I indicated what's the left and what's the right side so just match them up together at
the side seams and on the side seam of the short side of the skirt you're just pinning
until you reach that point and it's like a short seam so just pin. Take it to your sewing machine.
Sew both side seams with a half inch seam allowance and the seam with the front short
side of the skirt. You can see that that seam allowance you're going to press it towards the
inside so you're pretty much just going to do a hem as you would a regular slit. Sew with a
quarter inch top stitch until you reach that short side of the front skirt. On your skirt piece,
mark the center front as well as a half inch seam allowance along the waist seam so when you align
the yoke pieces and place right sides together you're going to be just intersecting and
everything's going to get sewn perfectly. Then I match up the center back of the skirt with the
center back of the yoke. Pin it in place and then I like to match up the side seams of the yoke
and the skirt. Pin it in place and now both yokes are kissing exactly at the center front so those
loops will hook over those buttons later. After pinning everything I like to just take it to the
sewing machine and sew with a half inch seam allowance. Don't forget to back tack and give
that seam allowance a good press and press it towards the hem of the skirt so there's not too
much bulk at the waist. Now we can attach the invisible zipper. I ended up trimming mine to
about 12 inches so it wasn't too long and now we can attach the zipper to the center back so just
pin it into place. I like to just hand baste it into place so I don't have pins in the way when
I'm actually sewing it through the sewing machine. It makes it so much easier. I like to use the
invisible zipper foot because this foot makes sure you're really exactly on the edge of those teeth
so it is truly invisible when you zip it up. And the zipper turned out so beautifully and now you
can just tuck those ends of the zipper tape in and attach a hook and eye at the very top and now we
can close the rest of the seam so just take right sides together of the center back and pin along
the bottom of the zipper all the way down to the hem. Take it to your sewing machine sew with a
half inch seam allowance. Don't forget to back tack. Depending on the loops you use just close the
center front of your yoke and just mark the center of those loops and that's how you find the center
of your buttons and now you can just attach them. I like to use shank buttons just because I think
they look really nice. Finally the last thing to do was to finish that scalloped edge that I created
on the skirt hem so I went ahead and just did that on my overlock machine with a rolled hem
finish and it turned out pretty similar. And if you don't have a scalloped edge feel free to just
do a baby hem all the way around the skirt and your dress is finally done. I hope you
guys enjoyed the tutorial and if you do recreate this dress please don't forget to tag me on
Instagram. I would love to see your final dresses and don't forget to like, comment, and subscribe.
It really is the best way to support your favorite creators for free. Thank you guys
so much for watching. I'll see you next time!
