Guitar Setup 3 Checking The Nut

TheGospelGuitarist
1 follower
Mar 30, 2026
How to check your guitar nut.
Hi, Gospel Guitars here with the third installment on setting up your guitar
using the manual from the Cruise Tools Guitar Tool Kit. After you have set up from video one
your neck relief and then proceeded to set at the bridge the action height for each string
in the second video, the third step to check is your nut at the other end of the guitar.
What you're going to need again is your trusty automotive measuring tool. You're going to shoot
for a 20 thousandth gap between the bottom of the string and the top of your very first fret.
Now you're not going to hold the frets down anywhere. I've seen some books where they say
like to hold this string down to do the measurement. I've got a couple repair books
that say that but maybe they're not have to reference the books but maybe they're shooting
for a different target measurement by using this method. I don't know. I'm just going to do what
they say in this book. So anyway, for 20 thousandths you want to take your tool once again
gently slip it in there and see what kind of clearance you have. In this guitar once again
it just barely rubs the string and on both sides of my guitar neck it is
pre-sliced. I would call it pre-sliced. Pre-slicely? Precisely. No, I don't drink.
Precisely 20 thousandths of an inch. Now what are you going to do if it's higher than that?
You're going to want to get a nut file and on the strings where, you know, most likely if one
string is going to be too high you can find issues by removing the string and try checking each
string's height, you know, one string at a time and that can tell you whether your nut slots are cut
evenly or one is cut too deep and so if you're getting like serious buzzing around the low
registers of your guitar but you don't get them in the high registers up here in your guitar
then this area is buzzing and this one's not. It's probably because of your nut. So there are
different techniques if you search out YouTube on everything from sawdust and super glue and a file
to fill them in if they're too low. Like if you can't get the 20 thousandths in underneath that
thing you're too low so you may be getting some buzzing at your first fret. So you're going to
want to fill that slot in with something. There's different methods. Do a search on YouTube. There's
quite a few helpful videos on things like that or if you have a guitar book go in search of
repairing your nut. You may just need to replace the nut. If you got a cheap plastic nut just get
rid of that sucker. There's no reason not to spend you know 10 bucks to 20 bucks on a really
decent nut. It's going to really help your guitar out a lot and it'll have better cut slots in it.
So that's what you're doing when you're checking here the string spacing. You're not setting action
here. You're checking actually the depth of your nut slots. So that's the third thing to check.
So if you're getting some weird things going on up here try this measurement see how you're doing.
Meaning you nut or to just you know do some filing on the one you have.
So that's it 20 thousandths and you're on your way and hope you found the video helpful
and be sure to like subscribe and share the video. Thanks for watching.
