I have lost contact with my 2nd string! Don't know if it is just a cable problem or something bigger. Here I discuss a solution I found on a forum which has worked for some people having this type of problem. Has not worked for me, but I thought it was important enough to share.
UPDATE: Got the new cable but still have the problem. After some extreme wiggling found that the wire entering the GK pickup is an intermittent connection on the 2nd string. comes and goes. On the Roland forums this seem to be a popular failure. I guess I need to resolder and beef up these connections.
Here is the link to the cable distributer I mentioned in the video.
Hi Gospel Guitars here. I'm making this video in reference to a recent problem that's crept up with
my Roland GR-55. I believe it's the cable, the MIDI cable, 13-pin cable that comes with the
unit. But the other day I was tuning and all of the other strings work except the second one.
If I pluck it, of course, it'll harden up. It'll show up on the first one. That's the E,
works fine. And then the third string of course. And then the second one is just not registering.
And then another check I did on this was to go into the GK settings and I went into sensitivity
and I'm not getting anything on the second string. So I thought maybe I lost a pickup
on the GK-3. So I'm investigating that and I just wanted to pass on what I've learned so far
that may work for you if you're having a similar problem. My problem, I'll let you know right now,
is not solved. But I wanted to pass this information on because it may help someone else
and I'm going to continue to try. And if I have problems again I'll definitely use this because
it's working for other people. As I swing the unit around here and probably should shut the
unit off first before I show you what I'm going to show you. I hit a couple forums and one of the
solutions was pretty explicit about how these are shipped from China. They're made in China I guess
and they coat the pins and everything with some kind of a corrosion resistance coating that goes
on the cables before they ship them across the ocean. I'm just taking his word for it but sounds
like somebody maybe knows what he's talking about. And it makes logical sense and you're shipping
things of electronic nature over salt water. But anyway if you take your deoxit, which I have
already done this by the way and it didn't solve it. I might have a broken wire in inside mine,
I don't know. But you want to spray your deoxit in here and in here but go lightly. You don't
want this stuff getting in there too heavy. And holding down your your pin here on the top of the
cable you want to run it in and out of here at least 10 times. Okay and then you want to swap
the cable ends and repeat the process on the other end with this jack. And then what you want to do
is you want to do the same thing on your GK3 on your guitar. So on your guitar you want to do the
same process holding in this pin right here. You want to be sliding this in and out of your guitar
at least 10 times and do it with both cable ends. And hopefully what this will do is strip the
coating off the cable is the guy's point. And others after reading the post on this forum, I
don't remember what forum it is. He said that you know it solved his problem and so I'm hoping it
solved mine but it hasn't thus far. So anyway that's my tip for this week. If you own one of
these and I'm still researching it. If you have had this problem and you have a solution for it
please go ahead and post that. And I have ordered a cable off of eBay that uses gold tips on the
cables. And I think I'll post a link on the video. I don't remember off hand right at the moment
the guy's name. But there are several people selling cables for these units.
And the other thing that's mentioned in these posts that I came across is that a lot of these
are not meant for the Roland. And the cables are not wired correctly to be used with the Roland.
And they sell for like 25 bucks. And most of us know that the authentic cables are going for like
50 dollars for the 15 foot one. So I found a cable for like 12 bucks. Just under 12 bucks.
And it is wired correctly according to these guys. So I've placed an order for it. And the other
person that ordered it was saying that it worked really great for him. And it's been going for
months. So I ordered a 10 foot one for like, no it was 17. I think it was just under 18 dollars.
And I should have that by video time next week. So hopefully it will be a solution. And if not
I'm going to have to take it to my repair shop up the road here and see what's wrong with it. So
it may actually be a part of the GK3 may have an issue or something. But I'm hoping it's just
a cable. A lot of people are having cable problems. So if you have solutions with this issue please
post them in the comments below. And maybe we can learn more about solving this together. So
thank you for watching. And please subscribe. And please leave tips
on this if you experience similar issues. So thanks. Talk to you later.