Guitar Setup 5 Setting Intonation

TheGospelGuitarist
1 follower
2 Video Views·Mar 30, 2026
How to set the intonation for your guitar.
AI Generated·May contain errors
Hey Gospel Guitars here with the fifth video in the series of the Cruise Tools
documentation on how to set up your guitar. I would again highly recommend buying this
toolkit for a little over 50 bucks but it comes with really good stuff.
All the tools you need to be your own guitar tech.
What we're looking at is a Tunomatic bridge on my Joe Pass guitar.
Yes that it's not stock. I already replaced it.
Pulled the wooden one off because I want my intonation to be set perfect.
It's a direct fit in case anybody else wants to do that.
So in this video we're going to be covering intonation of your guitar and how to set it.
And instead of making you suffer through two notes for 30 minutes back and forth
while I attempt to get it perfect. I'm going to just show you how it's done and not make
you suffer corporal punishment by watching me do fine intonation of six strings.
So I'm just going to show you how it's done.
So what you need to know is this screw right here adjusts the saddle of the Tunomatic bridge
back and forth. Now there's going to be some kind of screw on whatever bridge you have.
On a Tele or Floyd Rose there's going to be a screw
under the string that's going to loosen that saddle and allow it to slide back and forth.
That's your intonation screw. Usually it's a hex screw on your Floyd Rose type guitars.
Now if we swing down here the action is going to happen at the twelfth fret
by the two dots your twelfth fret. What you're going to be doing is measuring the frequency of a
fretted note in a harmonic note used by barely touching the string over the fret. So you get this
and you compare it to this fretted. Now I don't need a tuner to tell me that this one is flatter
than that one. Okay so because it's flatter I have to shorten the length of the string
by adjusting the screw down here at the bridge so that my saddle comes towards the neck shortening
the length of the string. The actual length of the string is measured between the nut
and where it sits on your saddle not this area back here or on your headstock. From the nut
to the bridge is your actual length of the string that vibrates. So you're going to be
doing the work at the 12th fret and you're going to want to use a tuner if I can get it in the
camera shot here. If you've got a strobe tuner by all means do that but if you don't have a
strobe tuner you want a tuner like similar to this that's got a needle display either a real
needle or a digital needle. They're a little more steady and this is really fine work so you don't
need to. Watching the leds flash can drive you crazy so a needle is a lot more accurate to work
with in that sense. And so you're going to do that over and over and over again you're going to
sound the note out loud fretted at the 12th fret and then you're going to play a harmonic
okay and you're going to be watching your tuner seeing where each note is registering
and then adjust your saddle piece at forward or backward to get it to where both notes are
identical in frequency. Once you do that to all six strings your guitar will be perfectly intonated
and every note will be perfect in frequency across your entire fretboard. Now when you're not
intonated correctly then notes might play better down here at the top of the guitar
but then when you come down here in the high end you notice everything's going flat
or sharp or all over the place. That's when you want to start looking at this guy right here.
Start moving those screws getting your intonation set by using the 12th fret
to do your measuring of the notes. Okay so fret a note sound it do the harmonic compare the two
using your tuner and that's all there is to it. It just it takes a very long time to do so
instead of making you suffer through that I just want to give a quick overview on how it's done
and you can now have the joy of intonating your guitar and making it play perfect. This is one
most absolutely essential things that you need to do to your guitar but it's also the last thing
that you do to your guitar. Be sure to follow the other four videos in which I covered how to set
your neck relief. I covered how to set your action of the string for playing. I have instructed you
on how to check your nut for clearance at the first fret. Pickup height was in the next video
and then finally intonation on this video. So once you go through all those things your guitar should
play like a dream and you have the knowledge to set it up to play the way you want it to play not
the way somebody else at the factory wants it to play. So not all standard setups fit every playing
style. So I hope you found this series insightful and helpful and good luck in setting up your
guitars. I've been doing it for years. I really like setting up my own instruments. It's nice to
be able to do that and so that's it for this series and thanks for watching. Please remember
to subscribe like and share my videos and until the next set I shall see you later. Thanks for watching.
