Carvin Quad X Amp Demo

TheGospelGuitarist
1 follower
Mar 30, 2026
My very long demo of the Carvin Quad X Amp complete with bad guitar playing and lots of talking. This unit does a lot so it takes some time to cover just the surface.
AI Generated·May contain errors
Okay, here we have the
carbon caudex with channel 1
1 and
a little bit of reverb
Just to fill it out a little bit
It is the stock spring reverb that you'll be hearing all through the demo
I don't have it very wet some people just hate spring reverb, so I don't want to make it real wet
I don't want it to be so dry
Just go out it sounds terrible and turn the video off so it's got to sound a little warm
I'm not running any effects in the master loop, and that's the only effect that I'm using so just channel 1
finger picking lick and go in here
That's the bridge pickup
And I should mention that I'm playing a Schecter C1
30th anniversary model and it's loaded with Seymour Duncan custom custom in the bridge, which is really hot and bright and a
59 in the bridge
So now you know what the guitar pickups are loaded with
That's it other than that just the amp straight into the Marshall
You
Slightly warm, slightly on the bright side, if you want to get some quack, use the treble
pickup.
So it's real sensitive to the type of pickup you're having, that you're using
and what kind of guitar you're using.
And okay, so channel one...
I've used the Description before, it being kind of like a tube quality to a JC-120.
It has really well-defined lows.
It's got the shimmering highs.
Both pickups.
Rhythm pickup.
And there's also a bright switch on the amp.
You may not hear that so much in the video, but it adds a lot of shimmer to it.
Now you can hear the reverb.
And a lot of shimmer.
And slide to channel one.
Let's hear channel two.
With the break button turned off...
Both pickups.
It's very similar to channel 1.
There's just a quality to it that's different that I can't quite put my finger on.
I think it's got more low mids in channel 2 circuitry than channel 1.
It's just got a... somewhere in there there's a little bit more warmth than channel 1.
The low notes are a little bit more defined.
Or if I do the same thing on channel 1...
Oh, that's pretty close, huh?
So anyway, but it's all it's okay.
I got them EQ'd fairly close.
My EQ on channel 1 is 7 and then the mids are on 4 roughly and highs are on 6.
On channel 2 you only have a low and a high control.
And the lows are on 8 and the highs on 6.
So they're EQ'd pretty closely.
The mids are probably affected by...
The upper and lower mids are probably in the sweep range between these two controls.
Where on channel 1 you have a dedicated mid range.
Let's go to channel 3.
It took a while to get channel 3 to sound decently usable.
It's got a rock tone to it.
And we just use both pickups.
So there's a smooth kind of breakup to it that I like.
And that's with two pickups.
It's a lot.
Changes quality a bit when you go with a bridge pickup.
I'll roll off the volume a little bit.
Now there's also a boost that I can use on each channel.
It takes the clean channels to being way too loud.
But channel 3 here is really handy.
As you'll see.
So now with the boost switch in on channel 3.
And using the bridge pickup.
Apparently the same type of rhythm example.
No I'm not going to play AC DC.
What I like about the amp so far is that it brings out the high
notes well when I play the whole chord.
That cuts right through.
So that's pretty good rock distortion on channel 3.
So I'm pretty happy with that.
And on channel 3 my overdrive is actually set to 7.
So I got more in there.
The low is on 8 and the high is on 6.
So you're going to hear that theme throughout.
You know my highs are all on 6.
And the lows are on 8 or 7 usually.
And the mids are fairly flat.
Except I got it scooped just a little bit on channel 1.
And if we engage the bright switch with the boost on channel 3.
I'm not a lead guy.
That's the bright.
In my ear it sounds better without the bright on.
Let's go to the insane sustain channel.
As you can hear I'm just kind of messing around.
I'm not really playing any songs.
Now on this channel I do have the graphic EQ engaged.
I think it was also engaged on channel 3 a minute ago.
Yeah over here we can do really good tone shaping with the EQ.
I like a little bit of a scoop sound on the distortion channels.
So
you might be thinking oh that's not that heavy.
Oh yeah watch this.
So
there's your death metal tone.
The sample go wherever you want to take it.
This may sound kind of familiar.
So really good stuff on channel 4.
And the lead guys it's just.
That was sad.
So
so
channel 4 with the boost.
So
with the boost and bright.
So
and as you can hear there the gate kicks in.
So that's just kind of some really bad playing too.
Yeah this isn't what I do anymore.
It's all I used to do.
So what am I doing with this thing with all this gain?
I have no idea.
I guess it's just for when I want to throw a fit.
Anyway I'm probably going to spend most of my time on channels 1 and 2 or 4.
So anyway channel 1.
Channel 2.
Sounds pretty identical.
Channel 3.
I just want to hit it harder.
It always sounds like something's holding back channel 3 you know.
Channel 4 nothing's holding it back.
Um I'm also running this through a Marshall power amp.
And the Marshall power amp has 6L6 WXTs installed for power tubes.
And it's got all stock preamp tubes in it which are there are 12AX7s for the preamp tube.
And it's I think it's an AT7 in the uh the other slot.
For the phase inverter.
That's the word I'm looking for.
And I'm running the Marshall in more like the British mode than the American mode.
It's kind of like when you flip these out.
For comparison kick them back in.
So there's more mids when it's in this position.
And I have the presence about half and the volumes a little over half.
So that's it for the little demo.
My new carbon quad X amp that I built the rack around.
So anyway I probably hope you found it helpful.
If you don't know what the tubes are in it watch my other video on tube selection.
And I go over all the tubes that I put in it.
And so I hope you like the video in spite of my sad playing.
So especially for lead attempts.
But um anyway I'm just not all here at the moment.
But um do much better with a song.
Anyway a little demo on all of what this amp can do.
And I'm sure it can do a lot more.
So thanks for watching.
Please subscribe and probably in some point in the future
we'll mess with different setups with this with this amp.
Because there's six effects loops on it.
And I haven't done anything with the midi capability.
Um another thing real quick on the midi capability.
Midi only changes channels on this amp.
It does not engage and disengage the boost.
So the carbon foot switch is about as many as it gets.
So it's just a channel switcher.
But if you have midi effects like my Yamaha here or some other unit.
Then you can still patch that in to the system with your midi pedal.
And I have yet to learn all that.
So never really mess with midi much.
So as far as having different settings patched into different channels.
I'll have to figure all that out.
So anyway until next time.
Cops Guitarist signing off.
