Road Warriors with Newbern and Cotten MotorTrend

Automobile Identity
371 followers
#automobile #autos #cars #4wheels #luxurycar #sportcar #highspeedcar #testdrive #toyota #tesla #porsche #hyundai #rollsroyce #royall #suvs
AI Generated·May contain errors
Welcome to Road Warriors presented by AutoZone with myself, David Newbert and...
Cotton. Look at those nimbly nimbly. David!
Today we're going to embark on a 160 mile trip to one of the most legendary roads in America,
the Tail of the Dragon. You're talking 11 miles, 318 curves,
all the chances for one of these to go off in the ditch.
Since this is the ultimate road trip destination, we've teamed up with the ultimate road trip store,
AutoZone, where they'll have everything we need and nothing we don't. Cotton,
what are we taking? We put it up to a vote in social media. It was between Dave C10 and my
Dodge Omni and apparently you all want to see us suffer. By a landslide, the people chose the Dodge
Omni. Of course they chose the Dodge Omni. Look at it. This is a 1985 Dodge Omni. Goes like hell,
GLA famous. This is a supercar. Came factory with a 2.2 liter naturally aspirated engine
that made 110 horsepower and 129 pound feet of torque. That's adorable. Look,
just because it ain't got that much horsepower, the size alone makes this thing worth it. This
should be nimbly and dimly around them corners. Let's take it for a spin, load up with everything
we need and nothing we don't. Let's get this road trip started the right way. I'm on it. Let's go.
This is the first time I've driven this thing. That's to the floor
and fourth. So let's put it in third. Okay. There's super power. You're right. This is a
super car. Don't be hating on it. Back in 1985, when this car was built, there wasn't much power
in it, you know, as far as vehicles. So with this one only being low horsepower, 110, they had the
turbo version, which was 170. That's quite a bit. It's better than walking. Brakes don't seem the
greatest. Oh, that died. We need, we need jump. We left the jump box at the house. No, it's in
the trunk. This is a great start to the road trip. Here you go. Here you go, bud. Give me the key.
We might need to get this battery checked out. Try it. Where's the keys? This road has never
traveled. Only when we break down. Don't you let it die. You let it die. You're jumping it next time.
I think the battery's just so dead that the alternator ain't even doing what it's supposed
to do. Well, if the, if the bolt gauge is working, the alternator is working, the battery might just
be shot. And if the gas gauge is working, we're going to be walking in about one mile. Well,
so far you've passed two gas stations. No, I got another one up here. If you want to go to
the gas station, we'll go to the gas station. We'll go to this gas station right here,
and then we'll get gas. Leave it running. If it stays running. Oh God. I saw my life
flash before my eyes. You didn't see nothing flash. Flash dance. Where's the gas tank in on
this thing? That's your car. Does it not have an arrow? No. Go to the driver's side. I'm going
to say it's driver's side. You don't even move. I'm going to get out and put gas in it. You just
stay. You piece of, it'll start. Leave it running. Let's switch sides. Switch sides. Look at that.
All right. Keep it running. It's running. RPM gauge isn't working. That's because we're going
so fast that it's spun it. It broke. It broke it in. It broke it in. I feel like I'm in high
school again because everybody had like a Dodge Omni or a Plymouth Horizon. I wasn't even one yet
when this car came out. Sorry. Okay. Hold it. 40. You were born in 84. So when this car came out,
when this car was sitting on the lot to be sold to you, I wasn't even one. Think about that. You
know what's even more messed up? You look older than me. That's because you have bad vision.
Is that what it is? You should do a brake test. What happens? Do it. I don't know.
That's how it's on the floor. It needs brakes. It didn't lock. It didn't lock up nothing.
And it didn't even stop. Let's get all the brakes. All the brakey brakes to make it stop.
Look how nimble this is. Look at this nimbly nimbly. Look. Dave, look. Going around corners.
I've never told you like riding passenger vehicles that I have no control over.
Makes me car sick sometimes. If we're going to get brakes, just go ahead and get all the parts you
need like calipers, brake hoses, pads for the front, shoes for the back. Get drums for the rear.
Because of the way it felt a little bit on the goofy side, maybe let's get some lower control
arms. I would rather put lower control arms and make sure it's right. Get the hub, get all the
stuff that you're talking about. Then this whole suspension should be dialed in. I'll go ahead and
get us a jack, jack stands, drain pan, whatever we might need on this trip. I'll go ahead and get
everything. Here's the parts list. Front and rear brake components plus new lower control arms.
Welcome to AutoZone. All right. You get the parts. Yeah. I'll get the tools.
Yeah. How can I help you? What's up, buddy? Okay. I got a car that's older than you,
so be ready. It's a 1985 Dodge Omni. You ever seen one of them before? Never. It's cool,
dude. It's a super car. The guy I'm riding with can't drive, so I got to make sure we can stop.
I need to get some front brakes, rear brakes, calipers. We're going to replace every brake
related part on this car, so now we need to get the tools to do so. We could use their Lona tool
program, but let's face it, Cod's not going to return these tools. Let's just buy them. Check
and see if they make hubs for that. GLH is just showing the bearing. There we go. All right. Got
those as well. We need some screwdrivers. We have zero tools. All right. I need a cart. This
isn't going to work. Do you have lower control arms? Let's check to see. You got the driver's
side and the passenger's side as well. So my battery's kind of old. Let me go ahead and test
it for you. Can you do that? Yes, sir. I can. All right. Let's go test that while Dave's looking
up tools. He's going to be there forever. I have no idea what we're going to need on this road trip,
so I'm going to get the biggest tool kit they offer, which is this 265 piece kit here.
We'll get that. We're going to need a jack. Don't need the three and a half ton. The car weighs
probably 600 pounds. I'm going to go with the aluminum jack because it's lighter and it's gold.
Why not? There's this. This thing's been sitting for so long, we don't know if the battery is good
or bad. We don't have a clue. Come here, they do a little testy test on it, and they can tell us if
it's good or bad. So if it's bad, then you can get us the right one that we need. I got bad news.
Is that bad? The battery is bad. It's appearing to have a dead cell in it. I would rather just get
a new one, and then we'll be done with it. That's fine. Could you get the right one for this thing?
Because I don't have a clue what it takes. No, yeah, we got some. Do you put it in, or do I
put it in? I can install it for you. There you go. I ain't got to get dirty. This is everything
you needed. Sweet. I got all the tools. Let's get this taken care of, get the stuff in, and get back
to your place to start wrenching. Please do that. I'm excited. Me too. Look, all we got to do is get
everything to fit, so open the back door and just throw it in. You might have to hold some stuff in
your lap. You just said it was going to fit no problem. Trust the process. Stop. Will it fit?
Of course it will. Are you sure? Oh, I'm dropping stuff. Fresh battery. Actually,
it seems to be idling a little bit better. Man, it went in the gear better. I don't know if it
went in gear better. The universe loves us. We forgot to order a major part for this. Apparently,
it needs a radiator. The one part we didn't get from AutoZone. No, no, piece broke, so now we're
kind of figuring out a way to get it, some fluids in it, so we can get back to Newburns and work on
it. Top of this fitting broke off, and then Newburn got in there and started fishing around
and realized that it's loose in there, so we're going to get it out and take a look at it. Shove
a piece of gum in here, screw that back in there, throw some water in it, it'll get us home.
There's a stick. There's a tree. What does that mean? You're using paper? No, this is plastic.
Shove this in there. That's not going to work. Why? Give me the paper. Just put the bigger side
on the inside. Hold that. I just lost our plug. This is part of the plug that was in the radiator.
It's got about a three-eighths hole in it. I got a stick, shoved it in there. We're going to screw
it back in the radiator, fill it full of water, and then leave immediately. We made it back to
the shop here. The stick that I shoved into the radiator held the water in long enough to make
it back home. We will address that later, after we put all this stuff right here on. We need to
get the Omni jacked up, and I went with a Duraless gold three-ton jack. I like the larger jacks,
they're more stable. And this one's aluminum, so that way we can just throw it in and out of the
car. We're not going to use any power tools. We're going to muscle it out, just like you would if
you're on the side of the road, and this is all you had to deal with right here. Caliper's off
and it's hanging, but to get it loose I got to take the brake line loosen up. Looks like at one
time it was replaced, but now it's so rusty that it ain't liking me at all. All I got left is to
pull the lower control arm off, and this side is done. Well, stripped. Right now Cotton's going to
finish taking the brakes off the passenger side. While he's doing that, I'm going to do a little
quick fix on the radiator, just long enough to get to the next store to replace this. I'm going to
pull the stick out and replace it with a bolt. Put some silicone around it. Radiator is patched.
Tomorrow, fresh morning, we'll get all the new parts installed and hit the road. It's a fresh
morning here, and we have all the parts stripped off the Omni, and we're ready to install all the
new stuff. I'm going to start with this Durlas lower control arm here. I went with this unit
because it's a factory OEM replacement. It's got a new ball joint already installed, new bushings,
so this thing should handle much better than the worn out stuff that was on it before.
So the control arm bolt is in a bind. It's actually down too low, so what I'm going to
do is try to alleviate some of the stress on it by jacking the bottom of the arm up.
It's just got the lower control arm on, and as we drove this over to AutoZone,
the brakes are garbage, and we got to make sure that the brakes work going around all those curves
as a Tailored Dragon. We're going to replace the hub, the caliper, the rotor, the pads,
and even the line. All this stuff will make it safer for us to handle the Tailored Dragon.
These hubs are a very, very snug fit into the spindle, and I'm just going to use a block of
wood, old-fashioned way. Now time to install our rotors, and I need to brake clean these things
real good because they are shipped with oil on them to keep them from rusting. You need to make
sure you get all of that off or else they won't stop very well. Front is pretty much wrapped up.
We're going to go ahead and move to the back here and address the rear brakes. Now the back is a
drum brake setup, not a disc brake setup like the front, which is common on older vehicles.
We went ahead and got new brake drum, new brake shoes, and a hardware kit for these. We're going
to pull these off, see what they look like. It's not leaking, which is a good thing. If it was
leaking, we'd have to put a wheel cylinder in it. All this stuff looks to be pretty old and crusty.
It's got a lot of rust in it, and the brake shoe is actually coming apart right there. The rule
of thumb when you're doing drum brakes is to take a good picture of everything in this area so you
know how to put it back together, and always do one side at a time. In case your phone dies, you'll
have another side to look at. So right now I'm going to start installing all of our new Durlast
brake hardware and drum. Brakes and everything are done. We're going to go ahead and put the
tires on this thing, hack it, set it on the ground, and hit the road. Now that we've installed all our
brake components and lower control arm, let's hit the road. The tail of the dragon is 160 miles away.
How does it feel, Cotton? Well, stopping wise we haven't stopped enough, but I can tell it's working
a little bit better than what it was before. But now this feels a lot better because before it was
a little bit more wobbly wobbly, and I can say that the control arms were not in perfect health.
I think on the next straightaway when it's nice and clear, I want you to slam on the brakes.
Brake check it. What I mean, slam on the brakes. I mean slam them. Pretend there's somebody walking
across the street in front of you, not me, walking across the street in front of you, and you don't
want to hit them. I would swerve out of the way. I will let you know. I will let you know when I see
somebody in the street, and you've got to react. Ah! Told you. That was better. I know it was better.
Why do you always like throw it out of gear and get lost in the gears when you do that? Because
it's things like we're doing. I'm trying to get it into gear. All you gotta do is push the clutch in.
No, because it goes down below the thing, and there's a threshold beyond the threshold, so then
when you take off you're like this. This thing has a random misfire. It definitely needs to tune up.
It does. There's no telling when the last time that was done. I guarantee 19 million years ago.
The brakes work better at least. They work real good. So we're a couple hours from
our destination. What I'm thinking about doing is just doing an online order
with AutoZone. If we're going to do that, I trust your radiator, but I would rather have a new
radiator. Excuse me? I trust your radiator, but I'd rather have a new radiator. So radiator? Yeah.
I got all the coolant related things in the cart. So all right, I'm gonna do cap. All right, here's
a cap and rotor button. Okay. Plugs, wires. We're gonna talk electronics. Get a voltage regulator.
PCV valve. PCV. Got it. Fuel filter. How rusted is this tank? Grab a couple of fuel filters.
I don't know. So rusty. Got it. All right. Belts. Let's get some belts. Yes. All right. We'll get
confirmation when it's ready to be picked up. To get the Omni dialed in for the Taylor Dragon,
we need to beef up the cooling system with new radiator and hoses and give it a general tune-up
to solve this weird misfire. Everything is ready for pickup. Okay. I'll get all the fluids and get
all the other stuff. Get in the zone. It's actually doing pretty decent, I think. I'm
impressed with the little car. Of course. We need some hand wipes too. Well, I'll get all the fluids
and the hand wipes because I'm dirty. I'll get the parts. Good. How you doing, sir? Welcome to
AutoZone. What brings you in today? Online order for David Newburn. David Newburn? Let me get that
for you. Thank you. This is number one on the agenda. I am tired of being dirty today. Oh,
we're going to change the fluids in this bad dog, which means we're changing the oil,
and these things are great. All you got to do is put a 3-inch ratchet on it.
You're done. I need to do an oil change in the Omni. That should be enough. Sweet. All right,
sir. Here's your online order. What are you working on today? Have you ever heard of a
1985 Dodge Omni? Yes, sir. Been a long time since I've seen one, though. We're taking this one to
the Taylor Dragon. Sounds fun. Let me figure out this oil. Oh, yeah. The STP Sin. This stuff works
really good. Now I need to get me some coolant. We'll need two of these with that new radiator.
Got everything we need? Nothing we don't. Sweet. All right. I got all that handled. I'll pay for
this, then we can hit the road. All right. Let's get it paid and go. I'll get you checked out,
sir. It has been a long day, but it's going to be a good day tomorrow. Yeah. Let's wrench on
this tomorrow. Okay. Then head to the Dragon. The Dragon. We're at Paradise Drag Strip in
Calhoun, Georgia, and our friends have gave us permission to work on this junk in their parking
lot. We stopped by AutoZone yesterday and picked up a whole bunch of parts to make this thing run
better. We got everything for a tune-up, change all the fluids, a new radiator. So let's get this
up in the air and get to work. That sounds good. Did you get the race-only oil? That's what we
need in this bad dog. The super oil. Guided learning hours. Goes like hell. Is what GLH
says. It does not. You're dumb. Everything is pretty much removed. Now I'm going to install
our brand new Duralast power steering belt and our alternator belt. An easy way to tell if you
need to replace your belt is to kind of pinch it. And if you see a bunch of dry rotting cracks in
there, it needs to be replaced. The old ones are dry rotted. And the last thing you want to happen
on the Dragon is to lose one of those belts. I do not want to break down on the side of the
mountain. So I'm going to throw these on there, get those adjusted nice and tight,
and then I'll help cut and finish up our tune-up. Driving this thing, we've learned a lot. It likes
RPM because the gearing is kind of messed up in it. Being that way, we know the engine is going
to get hot, especially going up and down the hills at the tail of Dragon. So we end up getting this
Duralast radiator, and I am totally impressed. It's all aluminum with welded seams. It's straight
up like a race car radiator. That's because we got a race car. This whole radiator debacle is
something we did not plan in our budget, I tell you that. So we're going to try to keep the budget
down by using the factory fan. So I'm going to go ahead and transfer all the fan over and all the
stuff and get it right back in the car and we're just going to get it. The alternator belt is
installed. Waylon, what do you think? I got it installed, bud. It's adjusted. We're almost ready
for the tail of the Dragon. You want to go? You want to go on the tail of the Dragon? Here,
hand this to Cotton. Cotton needs that. Will you hand that to Cotton? Radiator is all together.
Let's put this in. New Bern got the belts done. We're moving along pretty good. I'm going to throw
in a new PCV valve. This controls crankcase ventilation. It's the thing that makes so much
horsepower. It's got to be able to breathe. And these get clogged, so an easy way to tell if
they're not clogged. You hear that? You're good. But if you shake one of these and you don't hear
nothing, it's probably clogged. Getting ready to put the lower radiator hose in. The Duralast
preformed hoses are really good, so they fit great. Moving on with our tune-up here, the car
acts like it has a misfire sometimes at the red light, and I'm paranoid that it's going to die.
So what we're going to do is replace everything in the ignition system. We got a new rotor button
and a cap here. That was a whole kit. We've got new plug wires, new plugs. One of the reasons you
want to replace your rotor button is this can get burnt and corroded. And as this spins in the cap,
it can have a random misfire because it won't fire on every cylinder every time. So if it like
skips one, you can feel that when you're at a stoplight or if you're driving the car.
And you can tell this one's pretty burnt up there where it contacts the cap, and then here where it
actually sends fire to the cap. These are pretty lean. That's real lean. I mean, depending on what
plug they put in it, they could have put the wrong plug in it. It could be fuel filter, it could be
the fact that the rotor button was shot, and there's a number of things it could be. No matter
what we're doing here is just a plus to everything that's happening. It'll for sure run better. So as
soon as you're done with the plugs there, this part of the tune-up will be done. You need to
replace that fuel filter, run the radiator hose, change the voltage regulator to make sure it's
getting the right voltage for your alternator, top the fluids off, and if there's leaks or anything
like that, we'll be good. Today with a race car, you get a little shield over the top of all that
stuff. See that? You see that, Dave? You get a shield with that. I wonder what the purpose of that is.
Huh? I wonder why. I wonder what? I wonder why. Because it's a race car. What are you gonna learn?
Just like cotton, you're right, it's a race car. Okay, somebody just put a random screw in there.
Yeah, I know, but that's part of race car. Because why? Because race car. Right? It's a super car.
Super car! It's not a race car, it's a super car. Dude, what's the difference? A lot of race cars
outrun a super car. There's a lot of people fighting on them words. There's a fact.
Listen. Bring a super car to the drag strip, and you will get embarrassed. And you know what they'll say?
We gotta road race it. Yeah, we gotta. You know what I mean? We gotta road race. You like that road race
and stuff? I don't know, I've never done it. Legally. This thing's definitely original. That's cool. It's never
been replaced, so it's got an old Chrysler logo on the front of it, so it's probably a good idea that
we swap this out. Yeah, I'm gonna keep it though. Put it on your wall. Yeah. I probably shouldn't be doing this,
to be honest with you. My wrap sheet's not that great with electronics and alternators, especially.
I might let cotton do this, because if it catches on fire, it will be my fault. You want to do this?
This is a charging system. I have a tattoo on my arm. But you're not that person.
Like, just because you have horrible luck does not mean that it catches on fire because it's you.
I'm not saying I'm not going to do it correctly, but my luck. We don't need bad luck as far as the
charging system goes. What this does is it takes the voltage from the alternator and regulates it
to a certain volt, like 13 volts. And if it doesn't reach a certain voltage, the car won't charge,
it'll die, or if it goes too high, stuff melts. So you want to make sure that the charging system
is working properly. So we're going to go ahead and throw a new one on there, so we don't have to worry about it.
A little STP seeing high mileage. It's really easy to do a tune-up. You can walk into AutoZone,
talk to the friendly staff there, and they can get you any part that you need.
It's easy. Unbolt, put it back on. Easy. Oil's in, coolant goes in next. You know what this means, don't you?
The cooling system is upgraded. The tune-up is complete. It's time to hit the road for the
Tail of the Dragon. Let's go. Way smoother. I can already tell you now that it's running way better
than it was before. Look. We made it! Yeah! Tennessee state line. That's one step closer
to the Tail of the Dragon. Starting to like this little car.
You're the only Tennessee. You want to stop? New Bern, David, stop. This ride has been pretty epic.
I'm telling you, this thing is a whole new vehicle ever since tune-up and everything that we've done
to it. This has been a good ride. I'm very impressed. I've grown to love the little Omni.
Almost as much as I love old buildings like this. This looks like it used to be an old muffler shop.
There's a lot of cool stuff inside. There's a Ford Torino exactly like we use on the show.
Is it? Dude, it's the same body style and everything. Old wheels and tires sitting everywhere.
Oh man. Look at the coke machine. It's got old radios up in there. There's a 55 Chevrolet grille
right here in the window. Whole building's gonna fall apart from ants inside of it, but I would
love to have something like this. If you don't go explore and go to these small towns and go down
these beaten paths, you're never going to find the cool stuff ever. Okay, we're getting ready to go
to Tail of the Dragon. We made it. Yes. We just cruised this bad dog 160 miles to make it here
to this glorious junction, the Tail of the Dragon. Yeah, right now we are in between Tennessee and
North Carolina, the very start of the Tail of the Dragon, which is 318 turns in just 11 miles.
Think about that. That's like 28 to 30 turns per mile. Well, the best part is we're going to be
able to test all that Dura-Life stuff we put on. We get to test it on the sun. It's going to need
it. Okay, well, since I drove here and you slept, you're going to drive and I'm going to sit over
and try to live. I'll be glad to drive. I'd be a fool not to want to. Okay, well, I'm going to ride.
Don't kill me. I will put it to its paces right here. All right, let's go. Let's go.
Here we go. Man, first time driving the Dodge Omni. A bunch of fire for you now, so settle down.
I don't know how good these tires are, Newbern. We're going to find out. No, we ain't.
Just be careful on these tires, bro. Okay. You're the one that didn't change them.
Now you got to pay. I ain't got to pay for nothing. David, you like this thing?
This is cool.
Thank you for everybody that voted for this. We had been on seat 10. We've been on the tips already.
David, David, David. Hold on. Hold on. The back started sliding. Will you stop?
We lived. Dude, you got to admit, everything that we did to this vehicle,
the radiator took it. The suspension works so much better with the lower control arms.
The brakes handled fine. Everything that we did, tune up and all, was worth that.
Oh, absolutely. If we hadn't done that stuff, we'd have lost control about 19 times back there
and overheated. We lost on the first time the way he was driving.
I mean, we were in the RPMs the entire time. My eyes were glued to the road and to the temp gauge,
so I thought for sure this thing was going to run hot, but it didn't. It didn't. It was a
good radiator. Everything's good. The redemption of this Omni, when we put it up to you guys to
pick which one, we didn't have a clue. You guys picked it, we did it, and I have no regrets on
this. Go support your local AutoZone where they've got everything you need and nothing you don't.
And until next time, yeah, push it, like it, click it. Love it.
