Using other processors with the Roland GR-55 - Part 2

TheGospelGuitarist
1 follower
Mar 28, 2026
Contined discussion and demo of another wiring option available if you only have 1 amplifier.
AI Generated·May contain errors
Hey Gospel Guitarist here with option number two on using multiple processors together
basically using anything with the Roland GR-55 unit. I have another user that's been trying to
do this type of scenario with one amplifier and after thinking about it some more I came up with
option two or part two to the video that I already released on using multiple processors.
What I came up with was pretending that I had just an amp with a single input
and you just only have one amp I don't have any acoustic amp but I still want the flexibility.
So what I wound up with you have to make some sacrifices at this point
if you're just absolutely determined to use like a boss system or a line six or whatever
processor you have on the floor and you just insist on getting your guitar sounds out of that
but you really want your your other things going on over here on your synth
into one amplifier. So first thing you need to do is you have to sacrifice the dirty channel
on your amplifier and plug into the clean channel and only use the clean channel.
Now the way I have this set up now once again I have my GC1 Strat which has the MIDI
system built in the GK3 is built into the guitar but the wiring is still the same. So what you
need to do is if you're using a GK3 mounted on on the side of your guitar you want to take your
guitar and plug it in the way you would normally run your electric guitar just pretend the GK3 is
not there at all. Do not come out of the quarter inch jack and plug it into the GK3. Plug your
guitar cord into your output of your magnetic pickups and run it directly into your sound
processor. The MIDI side of the system you're just going to hook up your MIDI cord and run it
to the GR55. So if I had a GK3 on here then I would run a MIDI cord from the GK3 straight to this
and run the electric output straight to this. So the switch that we have available on your GK3
only two parts of it work. The third part's not going to work because
what this switch is actually doing is controlling the guitar MIDI signal mix
on the MIDI cable but we're we're not running the electric through the MIDI cable now we're
running it straight out into our processor. So this switch position you're still going to have
you're going to have two positions where you can hear the MIDI and your electric because
you're bypassing the switch on the GK3 by going direct. So now that's all confusing.
You're going to run two cables out of your guitar and if you're doing this on stage you're looking
at a lot of cables but if you're doing it in a studio and messing around at home
there's some pretty cool things you can do still. So that's the the wiring at the GK3
or here on the on the GC1 guitar and from there as far as the processor wiring is concerned
I'm using a Hosa normal stereo type cord. You got your your gray end which I'm plugging into the
mono output on the synthesizer and I'm plugging the orange end in on the mono output of the guitar
processor. Now the other end of the cord this is where the trick is you want to plug it into a
quarter inch Y cable. Okay so my synth's plugging in here my guitar is plugging in here and this
is why you need to basically omit the distortion channel on your amplifier and go with only the
clean. You're going to have to get all your distortion tones from your guitar processor.
So your clean guitar your clean guitar and your distortion guitar are working
through your processor and into the clean channel. Your synthesizer is working from the GK3
sending your midi pickup only into your your guitar synth. So you don't have anything else
going on here and then both of the processors are meeting at the Y cable and you plug it into
your clean channel and that's it. That's the whole wiring to do this with one channel one
clean amp. So this is the in my opinion this is kind of like the hard way of doing what you could
do with just the GR55 alone but if you are a super fan of what your processor can do and you've got
all your tones in there you may want to have to redesign them and build a bunch of patches over
here too. But just from messing around with this so far you can come up with some kind of interesting
things going on which I'll show you in a second. As far as volume control how are you going to
control this? You've got your midi control on your GK3 that can control the volume on your
GR55 as well as the foot pedal if you want to use the foot pedal that way.
And then you've got your magnetic output balance you know volume on your guitar and
if you've got your volume pedal on the floor board as well. So it's up to you how you want
to control your volumes but you do have your options. So a little demo of how this all can
work together. I'll just go with the synth first. So you're going to want to set your levels up
however you need them however loud your loudest music is going to be. You want to
bass everything off of that. So once again I have a string setting going on my synth
and it can be controlled with the foot pedal.
And then I also have here clean and distortion tone coming from the ME-50 in my case.
Throw a little chorus on there. So because I have chorus on here I'm not missing any chorus on the
jazz chorus amp because it's the same company. Basically I can make it sound the same anyway.
So it sounds as if I'm only using the other setup. So it sounds like I can this is the
same sound I was getting when I was playing through the MIDI cable alone. So I can still
do those kinds of things. One of the things I was messing with though earlier was you can do
so you can play like guitar licks with a bass playing along with it.
And if you want it to sound like a Mortem one you can throw a little delay on there.
So the delay plays your guitar clean just your guitar tone but when you're actually picking it
you're throwing a bass in on top of it. So that's kind of a cool thing going on there.
Just something I discovered messing around with this setup. So you can do some pretty cool stuff
but it like me personally if I wanted this well I can do all that with just the GR-55 by itself.
I don't I don't need this. So all I have to do is program that distortion model into this patch
and I can do the same thing without all the extra wiring going on. So it's to each his own.
Okay let's not be too judgmental about well you're doing things the hard way. Yeah but if
it's your favorite tones in the box that you're using and you don't want to sacrifice that and
you're performing on stage and you got an album out and it's original stuff and you just can't
do it any other way you know then the synth is something you're adding to the sounds you have
already this could be a useful way to go. But some people actually hire professionals out there to
program their gear for them too. I know there's a guy on YouTube that does that.
Can't remember who it is but you can buy patches for them but it ain't cheap.
So this is another workaround. So consider it part two or option two for using other processors along
with your GR-55 guitar processor. But like I said there are sacrifices. You have to use more than
one cable right on your guitar. You're going to lose the distortion channel of your amp. So if
you're getting your distortion tone there you're going to have to dial it into your processor
instead. And your midi controller is only going to control whether this is on and off. You can't get
the switch up here where it's only the synth. So it's a synth and guitar all the time or it's only
the guitar without the synth but you can't go only synth because you bypassed this midi the
gk3 switch system is bypassed because you're running directly out of your guitar. So anyway
hope yeah I hope that was helpful. A lot of little weirdness going on. It seems kind of strange but
once you see what what's going on it makes sense. It's just a few extra cables
but it enables you to do some cool stuff. So that'll be it for part two on on the videos. So
if you're interested in trying it go ahead. All you need is basically a y connector at your input
on your guitar on your guitar amp to do this. So if you were to do it on stage the cables running
out of both of them you can get these in 20 foot length stock from hosa and put it together with a
20 foot guitar cable. It's one way you can run from one section of stage back to the amp or use
a snake. So there's options out there just explore them but this will get past not having two amps.
So anyway thanks for watching and don't forget to subscribe and happy new year
