Using other processors with the Roland GR-55 - Part 1

TheGospelGuitarist
1 follower
Mar 28, 2026
How to setup your Roland GR-55 for use with other guitar processors along side it.
AI Generated·May contain errors
Hey Gospel Guitarist here and what I want to talk about in this video is using another processor
in this case a Boss ME-50 with your GR-55 guitar synthesizer.
And I'm just going to go over everything you need to do to make this work.
There are several ways you can wire the system. The easiest way is what I have going here because
some of us have a favorite processor we just think it'd be really cool to use them together.
And in this situation I'm using them with my Roland JC-120. So what I'm doing wiring wise is
I'm coming out of the left mono on the guitar synth into my plain channel on the JC-120 which
could also be another amp. And I'm coming out of the left mono on the Boss unit to my second
channel on my JC-120. So basically what I'm doing is running two amps. It's one amplifier but it'll
actually run all of these at the same time. All four inputs are actually active. Not all amps do
that but that one does. Some fenders do as well. You can have any combination of amps you want. You
could have your synthesizer plugged into a PA if you're playing live and then have your floor
processor be it a ME-5080 or GT-100 or you know a Line 6 product or whatever you're using running
into your normal half stack on stage or whatever. This just simplifies things here for the video so
you can see it all in one shot. You're also going to need a short cord to run from your guitar output
on your GR-55 and you're going to run that to the input for your guitar on your processor.
And that's it wiring wise. That's all you do. It's very very simple.
Now what this setup allows me to do is a number of different things.
So let's just say I have a lot of things in my processor that I don't want to mess with and
I've got my amp rig and it's all good but I want to add synthesizer sounds you know.
Like some songs sound really cool if you're playing them with other instruments
added to it and you don't want other players.
So if I want in this case I'm you can't see in the video but it's set my my synth is set to
rich strings okay and then I've got like a normal my normal setup over here you've got a distortion
patch and then I got my chorus or flanging or whatever and my delay section and a volume pedal
and I usually have the pedal on this setup for volume but it depends on the patch.
So this allows me to do a bunch of stuff and I'm going to do a whole lot of playing just real quick
demos. So remember also you have a switch on your instrument in this case it's a GC-1 guitar with a
switch built in and if you're using the GK-3 you got to remember that you also have a switch on
your guitar which is controlling the signals going to your rig. So you want to make sure it's set to
both if you're going to use them both together and you can control it with the volume controls
and the foot pedals and things like that. So my synth sound for strings okay now that's playing
through the clean channel on the amp. You want to have your processor playing through something
very very clean. Acoustic amps work as well and then I also have the guitar side over here
where if I show the synth
okay so I can have my clean tone a little delay or I can go distortion
so I have my clean and distortion tones are on my guitar processor
or rack rig whatever it is you're running your guitar out into
and then you can do combinations and bring in your strings
don't forget you can control the volume with your GK-3
or GK-2 midi unit if you're playing with one of those. So what I like about this guitar is that I
have all my controls right here on the guitar. I can control my magnetic volume and my midi volume
right here. I don't even need the foot pedals so I can assign them to do other things like
I can have that one as a wah-wah and this one to bring in chorus on my strings or whatever
but that's a quick demo of how you can have your whole rig playing through just one amplifier
like I say some of the fenders I believe a lot of the older fenders silver faces and stuff will do
will take all your inputs at the same time as well. A friend of mine has a deluxe and his does that
so it's a very neat setup allows for a lot of options and that's all you do for the wiring of
now let me zoom in and show you what you need to do on your GK-3 on your synth to make this
work properly. Okay on your synth what you need to do is configure your guitar output
jack and make sure everything's working properly there so you want to go into edit and you want to
first go over to system and then you can scroll your white box over to where it says other
and then hit enter and the first thing you're going to see is whited in the top here it says
guitar out so you have guitar out source and then you can set the source to whatever it is
until you can set it I have mine set to patch so this is a global command so all the patches
control what goes out my guitar out now you can set this to off and just turn the guitar put
output off completely you could set it to patch you can have your normal pickup only that runs
through it or your modeling section can run through it so I set it to patch and then I just
leave it and I do all the editing in my patches as far as what I want to go out my guitar output
so you can exit out of that exit again now you want to get into the edit for this section and
hit the page buttons to master and again you have another other so you enter into the other other
and again you have a guitar out with a source selection and here I have it set to normal pickup
so I can set it to modeling both modeling and your normal pickup are off and I have it set
to normal pickup because I'm wanting the synth on this patch to just do synth stuff I don't want
it doing guitar modeling and all that because I have my other processor over here for that right
so whatever I'm doing with my other processors it'll handle my guitar work I want it done
separately so make sure it's set to normal pickup and that way what'll happen is your guitar feed
comes in through your midi cable and it just kind of returns it right to the guitar out it
just sends your signal straight through this machine basically without touching it and then
the boss me 50 here I will use to play with that magnetic sound of the normal pickup tone
so make sure those are set up like that and you'll be sending your signal your guitar signal right out
the guitar output so you got to remember these in every single path that you build because if I
wanted a marshall stack and les paul playing instead of my strat then I'm going to have to
set this to modeling and then build the model within the patch and send that out the guitar
output by by changing this from normal pickup to modeling so if you're not hearing your guitar
at least not your normal guitar you might want to check these settings and make sure that you
have them set properly if that's what you want to hear you need to have them set to that
it's a very versatile machine so once you do that you hit the right button
exit out and you're ready to go so I hope the video is helpful and give you some more options
I've had questions about this so I thought I'd shoot a video out so thanks for watching don't
forget to subscribe and like and play with your own multiple processor setups
