PreSonus Studiolive 16.0.2 Internal FX Sends

TheGospelGuitarist
1 follower
Mar 28, 2026
How to use the internal effect units effect send routing buttons and save with recall options.
Welcome to my series on the Presonus StudioLive 1602 Digital Mixer.
Let's talk about the internal effects sends.
Now if you look to the effects section of the board, you've got a knob with your level
control for your send amount, and then you've got buttons underneath it, auxiliary 1-4,
which will send your effects to your auxiliary buses.
You have a main bus for your main front of house, and you have a select button which
will route your effects into the FAT channel so you can approach it with all of your compressor
and your EQing and everything that's available in your FAT channel.
You can apply everything there to your effects.
And that is how you're going to be using these buttons to route your effects from the internal
processors either A or B. Now these processing settings that you set
up are also storable in presets by hitting the store button on the panel up here, and
it will ask you for the memory location and the name, and you can just hit store and it
will store that in that location and revert back to your default screen.
Now whenever you want to recall a setting, you can just use the value knob and find your
setting and hit the recall button to reload what you have saved in the past.
So that's how the effects internal effects bus routing works.
