PreSonus Studiolive 16.0.2 Scene Saving and Loading

TheGospelGuitarist
1 follower
Mar 28, 2026
How to save and load scenes on the PreSonus 16.0.2. Super time saver when setting up for gigs or home recording sessions.
Welcome to my series on the Presonus StudioLive 1602 digital mixer.
Okay, let's take a look at saving and creating your scenes and loading your scenes.
So once again, once you get everything where you want it for whatever project you're working on,
whether it's live or in your studio, you've got an opportunity to save everything in the board.
All your settings, all your effects, all your auxiliary sound stuff,
everything can be saved to a scene. So up here in the scene section where your screen is,
you'll see right next to the effects button, a scene button. So let's say I have everything
set up and I want to save my scene. So I press scene and it's going to come up and tell me
that I can save my session to any type of location. There's 80 different locations I can
go up to for saving specialized scenes. And there's also a little note down here that says
recalling, and it'll tell you, do you want to recall your mute, your effects, your EQ and
dynamics, your effects mixes, your auxiliary mixes? What about your faders, your pots and EQ?
And you can select yes or no by using the previous and next and your value control.
You can skip through all of these and then just change it from yes to no.
And then what you do is when you get this the way you want it, you would hit store
and then you would name it. And of course I'm on board zeroing out, so it's not going to overwrite
it, but you would change the name and save it to whatever name you want to use. So when you want
to go back in and find one, you can just go in, let's say number 12 says something here. Then
you would just say to recall it. And again, that menu is going to come up and allow you to select
what you want recalled. And it's going to give you the same options as when you saved it,
but you can decide that, well, you know what? I don't want my EQ and dynamics. They were a mess.
Just, you know, use your next button, go over to EQ and dynamics and change it to
no. And then when you hit, you know, recall, it will go up and it's going to bring everything in
without that. So you've got a little bit of leeway as far as what kind of things you're
saving and what things you're not saving. And so that's how you're going to use your
scene selection for saving and loading.
