PreSonus Studiolive 16.0.2 Multifunction Buttons

TheGospelGuitarist
1 follower
Mar 28, 2026
Run through of the fire wire, solo and mute functions of the multi function buttons for the input channels.
Welcome to my series on the Presonus StudioLive 1602 Digital Mixer.
Alright, let's discuss the multi-mode section a little bit. On the left of the board
you have three buttons here in a grayed section, and you're going to have your
firewire button, your solo, and your mute. Alright, now the mute button is lit.
So these buttons work with the numbered channel buttons across your channel strip here. So if I
want to mute channel 3, which is selected right now, I can press the button and it will illuminate
red. I can also mute multiple channels, so you're not limited to just one. So that's your built-in
function to mute the channels individually or your auxiliary buses. Now the solo button
is going to illuminate yellow. And again, if I want to solo my selected channel 3 here,
I can listen to that one alone through the main bus, or I can solo through the monitoring section
of the board if I have PFL, AFL, or solo in place engaged in the solo section of the board.
So you can do things like listening through your solo channel through headphones if you're trying
to track down some kind of weird feedback coming from somebody on stage. You're going to want to
solo the channels without anybody knowing it, so you're going to be using headphones.
So anything you want to solo, again, multiple channels can be soloed all at one time.
Generally, when we want to track down a problem and shoot, you're going to usually do one at a
time. So that's your solo function. Now when you go to the firewire section, it's also going to
illuminate yellow. And what it's going to do is, you should have your system connected to a laptop
or a desktop computer in a studio situation. You're going to be playing back whatever you
were recording on your desktop. You're going to want to play it back through the software,
like the Presonus One software that comes with the unit. So when you push this button,
what's going to happen is, it's going to disengage everything that you've plugged in
on the analog parts of the board. So all of your mics coming in from stage, you're going to get
muted. So don't push this unless you have a computer hooked up, because you're going to kill
all your analog inputs. So in order to hear any of the software that you're playing back from your
computer or your laptop, you're going to want to push this button. And then you're going to want
to select your, let's say, whatever channels you want to play back. So Studio One is defaulted to
channels one and two. But within the software, I can route these outputs to any channel on the board
within the software. So I might choose to use a stereo channel on the board like 15 and 16.
So within Studio One, for example, or whatever Cubase or Reaper, whatever you're recording in,
you can route your playback channels within the software to play back to channels 15 and 16.
And in that case, you would highlight 15 and 16 to hear the playback and use your fader
to control your output volume along with your main fader. So that would be the
multi-function buttons. And the reason they call them multi-function buttons is basically because
of this row right here. These buttons have multi-functions, which are these three functions
I've just mentioned.
