PreSonus Studiolive 16.0.2 Solo In Place Pro Tips

TheGospelGuitarist
1 follower
Mar 27, 2026
A tutorial on how to perform a solo in place of input channels to help achieve optimum sound for each channels instrument. Strickly how to engage the solo option on the mixer.
Welcome to my series on the Presonus StudioLive 1602 Digital Mixer.
In this video I'm going to be talking about solo in place.
And after you set up your stage or if you're in your studio and you've got a bunch of things
going on, you may have your faders scattered all over looking something like this.
First thing you want to do is zero all those faders out.
Keep your master output around unity gain.
Then go up to the master section up here, push and hold the SIP button.
The SIP is for solo in place.
Go to the left side of the board where your multi-function controls are and press solo.
So now all you have to do is select the channel.
And generally we're going to go left to right, especially in a stage setup.
You have drums usually first, the mics need to be set up.
So you may have something like a kick drum on channel one.
So you might want to solo that drum until you can get it sounding really sweet.
It could be any instrument, but in this case we'll just say it's a drum.
Bring the fader up to about unity gain or so, wherever you need it.
And then, now you're going to go to work on your channel, the fat channel area, and set
up your compression and EQ for channel one.
When you're done with that and you like the way it sounds, you can simply press channel
two and depress channel one.
And just bring down the fader, bring up the next channel, and then go through the fat
channel again for that channel.
And you can do this any way you want.
You can deselect is what I like to do first, and then push the next number, deselect, go
to skip a channel if you need to, if you already have channel four set up, you can skip around.
You can also do multiple at the same time.
You can have different lights, now it's not showing in the video very well because the
lights are bright, but three, four, and five would be orange, and the rest are all muted
out.
So you can actually just select one or two channels.
You're only going to do one channel at a time, but you might want to have a pre-selection
of a group of channels you want to work on.
So when you get all your instruments all set up, at that point you want to deselect the
last channel you were working on, you're going to want to go over to solo button, and if
you notice, hitting the solo button doesn't change because you've got a couple buttons
here, three buttons, and you need to hit mute to disengage the solo button.
Go back over to the SIP button and disengage that.
Now you're ready to do an actual stage mix of all the instruments, now that you have
each channel sounding its best.
