PreSonus Studiolive 16.0.2 Monitoring Section

TheGospelGuitarist
1 follower
Mar 27, 2026
Overview of the monitoring options using fire wire, headphones, mains, solo button.
Welcome to my series on the Presonus StudioLive 1602 digital mixer.
All right let's discuss the monitor section of the board.
On the right side of the board you will have at the top of the monitor section your headphone
control. So this control will adjust your headphone level. The one below it is your
monitor output level. Right next down we have the firewire button. So what that's going to
do is patch your firewire return and you can monitor on your local headsets or your
monitors in the studio. You also are going to be monitoring by the way returns number
one and two on your firewire. Next down we have the solo button. So you can monitor in
your headphones whatever channel it is that you're soloing live. So you can do that without
anybody hearing it. And then you got your mains so you can send your main signal to your monitors
and that signal will be pre-fader. So no matter what your fader is set at on your board your
main fader output that button will not it's kind of like it bypasses it. So there's a set level
before it hits the fader that's the level that's going to hit your monitors. And if you engage
both your solo and your mains then you can effectively listen to a solo channel during
a performance and bring that level up over the mix so that you can hear what you're doing.
And the audience would not hear you doing this at all. It will not affect the main output on the
main floor speakers. But for your purposes you can bring the level up so that you can hear what
you're doing like if you're tracking down a problem. So that's the monitor section of the boards.
