Draw Realistic Face of a Woman at Three Quarter Angle! Beginner Friendly Tutorial

Random portrait drawing
23 followers
2 Video Views·Mar 28, 2026
Hi, this is Anne Helen. Thank you for joining me in this tutorial.
Grab a pencil or white sheet of paper and you're ready to go.
I'm using a reference photo from Pinterest but I converted it to black and white.
First, I try to get the cranium structure of this person on the photo by using the Loomis method.
I draw a vertical line from the top of the sphere to represent the center line
Then I draw a line across the equator of the sphere to indicate the eyebrow line
and under that another line for eye level.
Next, mark the hairline and measure the distance between the hairline and the eyebrow
and use that same distance to measure the approximate location of the nose and the chin.
Sides of the heads are slightly shallower and I use that to measure
the location of the ear and from the ear the jawbones to the chin.
This video has been speeded up to three times its original speed so feel free to
pause or slow it down because this first stage of the drawing process is essential for the later
stages. I go through a repetitive process of looking at the reference photo,
finding and indicating where the facial features are and then marking them down
very softly and indicating their shapes very softly with my pencil.
When I'm satisfied with the overall facial framework, I go in and softly remove most of
the construction lines. After some erasing, I need to go back and rebuild or redraw some
of the shapes that I drew earlier but also checking what I'm drawing against the reference
photo. If you're new to drawing faces or portraits or even new to drawing itself,
do the best you can but don't expect perfection because even I don't expect my portrait to turn
out perfectly identical to my reference photo. It is a good idea to set a realistic goal for
each of your drawings and my goal for this tutorial is not to draw a perfectly rendered
face but to show you a realistic drawing process which includes a lot of drawing and erasing and
redrawing. I call it the building, tearing down and rebuilding process like what I'm doing right
now but each time I erase and rebuild or redraw, I make my drawing a little closer to the image I
want it to become especially at this stage when I'm still building the blueprint of my facial
or portrait drawing. I am not a slave to any of the lines or marks I've drawn on the paper right
now. If you have this mindset when you draw, you will have a much easier time correcting your own
drawing and learning from those so-called mistakes. Many online tutorials show you
drawing or the drawing of a face as a linear process but I learned the hard way that drawing
is actually a very repetitive process. I can never get the facial proportions correct on my first try
so I repeatedly look at my reference, make changes, look at the reference again, make more changes
and this process continues and I repeat this process until my drawing is ready for shading.
In this construction stage, I look back and forth between the reference and my drawing
and ask questions such as are the eyes too far apart or too close together? Is the left eye
smaller than the right eye? Is the nose too long or too short? How about the distance between the
nose and the upper lip? Does the chin need to be more angular or more rounded? Could the top of
ear be higher? Don't get me wrong, I don't talk to myself out loud when I'm drawing and I don't
think you should do that. At least not when there are other people around you. Jokes aside, having
a self-dialogue quietly with yourself while you're drawing is actually pretty healthy because to ask
and answer these questions, you have to become a better observer and it takes time, training
and repeated practice to be able to observe better. Have you ever taken out some of your
older artworks maybe from two or three years ago and take a quick look and immediately you spot
certain mistakes that you didn't see? When that happens, that means your power of observation
has improved and that's a good thing. Although there's no hack for improving your power of
seeing things, there is one thing you can do to immediately give yourself an advantage during the
drawing process. That is to take a break from your drawing, put away your drawing pad or notebook
and come back to your drawing in an hour or a couple of days later so that you can see your
drawing or painting with a fresh pair of eyes and can see what has been working for your drawing
or what mistakes that you didn't see in the first time. And if possible, do this several times during
your drawing or painting process. Now that I'm looking at my drawing on the video, I'm cringing
over the mistakes that I didn't see. So I should have paused the video and practiced what I'm
teaching right now. Well, enough of my regrets. Back to the video. I've started shading and I always start
at the darkest areas on the drawing. This is so I can get an overall sense of the range of values
that I need to use for this drawing and also to prevent my lighter areas from getting too dark.
If you're working with graphite pencils or charcoal pencils, it's a good idea to start from
dark to lighter values. In this drawing, the darkest values are in the hair, really the parts of the
hair that is turned away from the sun or in the places of shadows. I'm also shading in parts of
the skin and the shirt that receive the shadows cast by the structure or the head and the neck
which blocks the light from reaching these areas on the neck, chest, and shirt. These kinds of
shadows are called cast shadows. I'm also shading in some areas of the neck and chest that receive
the most shadows and not just cast shadows but also form shadows. Form shadows are usually lighter
than cast shadows and form shadows on a form are caused not by other objects near it but by the
forms of the object itself wherever the form turns away from the light source. For example, the part
of the neck muscle that is turned to the left side away from the sun and the collarbones and the chest
are also turned away from the source of light. In the left side of the face, basically most of the
contours are turning toward the inside of this picture so they are all form shadows. I'm shading
the darkest areas of these form shadows in my first pass of shading because I need to work from dark
to light. I'm also working in some of the darkest areas on the face itself and that includes the eye
sockets. In this light condition, there is cast shadow between the nose and the eye and under the
eye socket, the cheek area slightly to the left of the nose, the area under and to the left of the nose
and the areas under and to the left of the upper and lower lips. I'm shading in also the right eye
socket and to the right of the nose but these are all form shadows so they should be lighter than
the cast shadows. If you like this tutorial so far, please click on the thumbs up button and subscribe
to my channel so you won't miss any future tutorials like this. Your support helps me make
more quality videos like this and helps YouTube to push this video to more audience. Thank you so
much for your support. My eyes are comparing the reference photo to my current drawing and ask
myself questions about the values. Are the shadows above the chin lighter or darker than those under
the chin? Is the right nose bridge darker or lighter than the left nose bridge and is it darker or
lighter than the right cheek? I just drew a very very soft line around the contours of the lips
and I'm shading in the inside of the lips with equal or less pressure. You should never draw a
hard outline around the lips and although it seems like I've drawn a rather hard outline around the
lips, it's probably because I had to increase the contrast on my video so my pencil marks can show
up better. From the photo, I can see that this part of the forehead has form shadows because it faces
the left but the area to the right of it is probably the brightest part of the forehead so
I'm not shading that area for now. I'm darkening the values under the eyebrows because they are one
of the darkest areas on a face under this light conditions. There is quite a bit of form shadow
under the right eyebrow in the right eye socket and there's also some cast shadow in the temple
area to the right. With my kneaded eraser, I dabbed an area under the right eyebrow which is the bony
area above the eye socket. I'm shading in different planes and parts of the nose with the form
shadows but also keeping the highlights that I see in the reference photo. I'm shading in the form
shadows on the right side of the face which is the lighter part so I'm being careful not to do it too
dark. So I'm holding my B pencil much further from the tip even though you can't see my hand.
When you hold your pencil much further away from the tip, you force your hand to hold the pencil
more lightly so you will also shade more lightly and when I want to shade darker values, I hold
my pencil closer to the tip and use more force. I can draw forms and shadows with very light
or very dark values even when I'm just using my B graphite pencil. I highlight the brightest spots
on the irises of the eyes and I shade in the rest of the iris with an overall light gray color
and darken the top parts of the irises under the upper eyelid. The outer corner of the left eye
gets very dark. It's probably one of the darkest areas on the face and in the eye itself so I'm
making the outer corner of the left eye socket darker. Certain parts of the left eye look as
dark as or even darker than the area under the chin in the shadow areas of the neck and chest.
In this stage of the drawing process, you should constantly check the values that you're shading
not just with the reference photo but also the rest of the face, neck or any other areas that
you're drawing. I'm still constantly making adjustments but not so much in terms of form or
shape right now but more in terms of the value relationships. Now that I have achieved the right
value relationships in the skin tone areas, I start drawing with my mechanical pencil with 4B
lead inside. Earlier when I was drawing in the skin tones, I didn't want to use a 4B pencil
because the person in the reference photo has relatively fair skin and in comparison her hair
is much much darker. And because 4B graphite is my darkest available pencil, I'm saving the darkest
shading to the last step when I fill in the darkest parts of the hair areas. I'm not drawing the hair
strand by strand but I'm filling the medium dark to the darkest areas of the hair while leaving the
highlights in the hair pretty much untouched. So I'm filling in the hair in clumps or shapes that
I see from the reference photo and also based on my previous dark layers. There are layers of
interesting shapes in the bun in this area and on the photo there are some really nice dark and light
contrasts but the focal point of my drawing is on the expressions of this person's face. So I down
play the contrast and the layers in the bun of the hair. This way my viewers won't be distracted
by the interesting play of light and shadow in the hair area. The only times I've ever chosen the hair
over the face to be the emphasis is when I do hair studies. In most cases, especially if you're
drawing portraits, the hair should play a secondary or supporting role. And even as I'm darkening the
values of the hair and adding some details or indications of details, I avoid spending too much
time on the hair areas and go back to the center of the face which is my focal area. And by the
center of the face, I mean the area between and including the eyes and the nose. That's the point
from which we build the whole face. And it's also the main area of facial expressions. So I want to
make sure that I spend more time in this area than any other areas on the face. I'm darkening the
areas of the eye to the values that I see in the reference photo. And now the highlights in the
irises really pop. Refining and correcting the shape of the outer edge of the right eye. And I just
darken the white of the eye at the outer corner with my B pencil. This gives the eye a more rounded
shape. I'm still building on the shading and values from my previous layers. Because tonal contrast
or value contrast is what gives dimensionality to your drawing or your portrait. I'm finally giving
some definition and forms to the ear area. And because it also plays just a supporting role, I don't
want to spend too much time on it. But just give it the correct shapes, line and values without
overworking the ear. Okay, back to the center of the face. Just darkening the values, making sure
they're correct. The left eye socket is definitely darker than the right eye socket. And starting from
the eyebrows, I work on the nose again. I'm still shading rather softly with my 4B pencil because
the 4B can get very dark very quickly. And I'm working on the skin tone areas. I want to capture
the particular shape of this nose, so I'm using shading to do that. I worked on the left side
of the nose bridge first, which is darker, to the bottom. And now I'm working on the lightest
of the form shadows on the nose. I try to use my regular B graphite pencil when I'm shading
in the lighter areas. Working outward from the center of the face, I'm now working on the left cheek.
The cheek becomes darker as it goes lower. There's some dark cast shadow under the left side of the
nose. But I want to shade it softly because it seems to transition very smoothly into a form shadow.
Darkening the form and cast shadow under the lower lip. Okay, I've decided to use my number 4
pencil for the cast shadow under the nose because it's so dark. Slightly darkening the philtrum.
And I'm finally gonna work on the mouth. First, the upper lip because it's usually darker than
the lower lip in this light condition. I'm still looking at the reference photo for my values.
I can see that most part of the lower lip is so light it's actually lighter than the shadow areas
on the left cheek. I decided to draw the lower lip in a darker value because I don't need to
be a slave to my reference photo. There isn't enough time in this tutorial for me to explain
why I said that, but I'm hoping to do that in another video. So what is the take-home lesson
for this tutorial? First, build a good framework for your head and facial structures
which may involve lots of building, tearing down, and rebuilding over and over again.
Second, have a personal dialogue with yourself asking the right questions at different stages
of your drawing. These kinds of questions will help you become a better observer over time.
Third, to achieve depth and dimensionality of your drawing, draw with enough value contrast
or tonal contrast. A good understanding of form shadows and cast shadows will help
make your drawing look dimensional. Fourth, work in layers but work from darker areas to lighter areas.
I hope you had a good time drawing with me.
Please click the like button or the thumbs up button
and consider subscribing so you can get my latest tutorials.
