Creating Parametric Assemblies

Decor Design 3D
20 followers
Mar 28, 2026
AI Generated·May contain errors
Hello and welcome, my name is Andrew Peel, and in this video I'm going to show you how to create
parametric assemblies and save them to the Home Builder library. Parametric assemblies are assets
that can change size in a logical way, they snap together to other assets in an intuitive way,
and they can provide a number of controls that change the look and behavior of the asset.
When creating assets for the Home Builder library, you have the ability to create a simple asset
like a door panel, save it to your library, then quickly assign it to the entire design.
To change out door panels in your design, you can open the library interface,
then access the Fronts tab. After selecting a category from the door library, you can select
the door panel you want to use, then assign it to the base, tall, upper, and drawer front pointers.
After clicking the Update Cabinet Fronts button, the entire design will be updated with your
selection. To change out the components for entry door panels, you can access the right-click
properties, select the tab of the component that you want to change. In each tab, you can select
the category of the asset, then select the image of the component that you want to use. The component
will automatically be updated for your selected door. Changing out components for windows is very
similar. You can access the right-click properties, select the tab of the component you want to change,
and after selecting the category of the asset, you can select the image of the component you
want to use, and the window will automatically be updated with your selected component.
So let's go and start creating new components for our library. So we're going to start out by
creating this door panel, and the first thing that we want to notice is how the door is positioned.
We can see that the door is laying flat with the x dimension being the length of the door,
or when it's assigned to a cabinet, it'll be the height of the door, and the z dimension is the
thickness of the door. Another thing that we need to understand is that since there is a left
and a right door, we need to allow the dimension of the door to not only be a positive y, but also
a negative y, because one of these will be used for a left door, and the other one will be used
for a right door. Now the way that we accomplish this is by using these two objects that are added
to the door. So we have a y1 and a y2. As you can see, as I select these, the y1 is pretty much
right here on the base point, and y2 is basically the same location of where the y dimension of the
object is. So when we change the y dimension here to be negative, you'll notice that the
y2 object will then stop at the base point, and the y1 object will then position the vertices
correctly. We create the door in this way so the mesh doesn't flip inside out, and allows us to
have both a left and a right door created. So let's go ahead and get started. So we're going to
start out by creating the assembly. So we'll go to the library interface, go to the assets tab, and
then here in cabinet doors, we'll go ahead and select create new assembly. That's going to create
the base structure of the assembly that's needed for the door. So here if we type n to open up our
sidebar panel and go to the objects, we'll notice that there's some information already added to
this assembly. So here we already have the y1 object and the y2 object that we're going to be using.
There's logic already added to these to where when we change the dimension on the y, you'll notice
that the y2 object stops at the base point. And the way that that's set up here, if we go to the
logic tab, we can see that the location y for the y2 object is set to if the dimension y is greater
than zero, then we want it to be the y dimension, otherwise it's going to evaluate to zero. And
there's basically the reverse logic for y1. Now this may be a little bit confusing, but let's go
ahead and start creating the mesh so we can get a better understanding of how this works. So we're
going to go and click add object. We're going to add a mesh object here and let's go and just call this
door and then we'll click okay. And now to model the geometry of the door, it's going to be very
simple. What we're going to do is we're going to type tab to go into edit mode. Here we're going to
go to face select mode and we'll select this top face and I'm going to use the inset tool. So I'll
type i on my keyboard and you can see we can inset that face. So here I'm going to inset it right
about there and then we're going to go and type e to extrude and we're just going to go and inset
this just a bit. So we kind of have this set up to where this would be a mitered five piece inset
door. And typically here this left part would be the left style, this would be the right style,
this would be the top rail and the bottom rail, and then we have this fifth piece here which would
just be a panel that is enclosed by all of the pieces around it. And so now that we have the
geometry modeled, we're going to go and type tab to exit edit mode and here in the door we'll go
and open up the properties for that. Here in the data tab we're going to go ahead and set up the
hooks for this. So go back into edit mode here and I typically always do this inside wireframe mode
in the vertex select mode as well. And so here we want these vertices to be assigned to the
x dimension. So we're going to assign that to the x dimension of the object. Here I'm going to go to
a front view and I'm going to go and select just these top vertices here, not selecting the bottom
ones. And this is going to be assigned to the z dimension here. And then rather than assigning
these vertices here directly to the y dimension object, again we don't want this mesh to flip
inside out. And so here this is where we assign this to the y2 object and then these are assigned
to the y1 object. And so no part of the mesh is assigned directly to the y dimension object.
This is really just used to position these two other empties that we're using. And so with that
done we'll go and select connect hooks. That'll bring us back into object mode. We'll go and test
this out. So here if we grab the y dimension object, type g, here we can see that the mesh
changes just like we would expect. And you'll notice that there's a little bit of weirdness
when we get too small but there's really never going to be a door that's created that that small.
It would basically just end up being a slab door at that point. And so the y dimension works. Here
we select the x, type g, see if the height of the door works. And then we select the z dimension
object and type g. We can see that the thickness of the door will adjust correctly as well. So next
we're going to go ahead and assign the materials. And so we'll go into the material mode. And then
here in the material tab we're just going to assign one pointer to this. So we'll go and click
add. And then we want to assign this to the pointer that's in the home builder library.
So if we go to materials, here we have this cabinet door surfaces pointer. Now there is a
cabinet door edges as well. But since this is a solid wood door, edge banding wouldn't typically
be applied to the edges of the door. It would all just be the same surface material. And so here
we're going to assign it to the cabinet door surfaces. And so here in the pointer name,
we'll type that in. And so with that pointer assigned to this material slot, we'll go ahead
and update the materials. And we can see that our door changes color. But one thing you'll notice
is that there's no texture assigned to this. It's just a solid color at this point. And that's
because this mesh has not been unwrapped yet. And so here, if we select on the mesh, we type tab to
go into edit mode. Here we can select the entire mesh by typing A on our keyboard. And then we'll
type U to bring up the unwrapping tools. And then here I usually will just use this smart UV project.
So if we click on that and click OK, now we can see the texture assigned to this. Now at this
point, you might want to make some modifications to how the mesh is unwrapped. Typically, you
wouldn't have the grain on these doors all running the same direction. Here for this part down here,
if we select face select and select this, the grain direction should be running the other direction.
And so to make modifications to how the mesh is unwrapped, you can do that in the UV editing tools.
And all we're going to do is here we'll switch into material mode. We're just going to select
on that face, hold shift, select this face as well. And then we're going to type R with our cursor in
the UV editing space. Type R and then 90 to rotate that 90 degrees. And so now you can see that the
grain is running a different direction. And you may want to also just kind of continue to tweak this
to ensure that all of the faces are going the correct direction. But I'm just going to go and
leave that as it is. There's a lot of tutorials on unwrapping objects within Blender. And so let's
go and leave it as that. And here I'm going to switch back to the PyClone interface. And now we
have the door created in the way that we want. A few things that we need to do here is here in the
prompts interface, you'll notice that this assembly already has this hide prompt created,
but it's currently not doing anything. And we have this because since a cabinet has a left
and a right door, both doors may not be turned on. And so Home Builder will automate the process
of hiding the door that's not displayed for each cabinet. And so here in the objects tab,
in the door main properties, we're going to go and add a driver to the disabling viewport. So
right click, add driver, and we're not going to use this interface. We'll go and get out of that.
And then here in the logic tab, you can see this is our driver that we just created.
And we don't need this variable. So we'll delete that. And then here in the cabinet door properties,
we're going to go ahead and just add in the hide prompt. Click OK. And then we're going to copy
this variable name into our expression. And now we'll see that when we turn the hide prompt on,
it will hide the door. But it's important to know that there is a property to disable in the viewport
and there's a property to disable in the renders. And so we want to make sure that these are both
set the same way. And rather than adding a new driver and resetting that up, all I'm going to do
is right click on this variable, copy that driver, right click on this property, and then paste that
driver. And so now when we set the hide prompt, it's not only going to disable in the viewport,
but when you create the rendering, it's not going to display that door at all either.
And so we're just about ready to save this to the library. I'm going to go ahead and give this a
better name. I'm just going to call this mitered five piece door. And just to save on disk space,
I'm also going to remove the material that's assigned to this because that's automatically
going to be applied to this part when we drop in a cabinet. And so I'm going to go to the
properties interface in the material editor. I'm just going to hit the X button right here.
That'll get rid of the material, but it will keep our material slot there. So we don't want to use
this button to remove the material slot. We want to keep that just as it is with the pointer
information assigned to it. We just want to clear out that material. And with that done,
go ahead and collapse this. And now let's go ahead and save our asset. So here in the cabinet door
library, again, if we wanted to, we could create new categories by opening up the browser window
and organizing our assets how we want them to be. But we're going to leave that as it is for now.
And here I'm going to go and click save asset to library. It'll verify the name for us. Perfect.
We'll click OK. This will take a minute to generate the thumbnail and save this asset to
the library. But now we see that we have the mitered five piece door added to our library.
So next we're going to be creating this entry door panel. And the first thing that we'll notice
is that rather than the door panel laying flat like it is for the cabinet doors, this is positioned
to where the Z dimension is going to be the height of the door. The Y dimension will be the thickness
of the door and the X dimension will be the width of the door. And very similar to how the cabinet
door works, there is a left and a right door panel. And so we want to make sure that the X
dimension can be positive and also negative. So we want to make sure that we use, in this case,
the X1 and X2 objects in order to make sure that this can correctly change the size of the mesh.
One additional thing that we're going to be adding to the store is here in the prompts interface.
We, of course, will set up the hide property, but we're also going to have this additional property
to adjust the size of the lower panel height because we have this mid rail in the door. And
so here, as we adjust that, we'll be able to change what the lower panel height is for each door
independently. So that's what we're going to be creating. So let's go ahead and get started.
So we'll start out in the same way. We'll go to the library interface and go to the entry door
panels. And here we'll create a new asset. Give us the main structure of the assembly that we're
going to be working with. And here we'll open up the sidebar panel. And rather than creating the
mesh first, I'm going to go ahead and create the information needed in order to adjust the bottom
panel height. And so here we'll go to the prompts and we'll create that prompt. This is going to be
a distance type. So we'll go and select that. And then for the prompt name, we're going to type in
bottom panel height and then we'll click OK. So now we have this variable added. Next, we need
to create the empty object that's going to control the location of that mid rail. And so here we'll
go to the objects and we'll start out by adding in the empty object. So we'll call this bottom
panel height as well. I want to give it a name that helps me understand what this is supposed
to control. So we'll click OK. So that has added the empty object here. And then all I'm going to do
is here for the Z location, I'm going to right click and add a driver. And then in the logic
panel here, I'll go ahead and add in the prompt. I'm going to add in that bottom panel height
prompt. And so now I can get rid of this variable since we don't need it. It's going to copy this
and paste this in the expression. And so now when I adjust this, you'll notice that it's going to
adjust the height of that empty object. It's also a little distracting how big that empty is. So
here let's go ahead and set the size to be quite a bit smaller here. That works for now. And just
as a default value, let's go and set the bottom panel height to be one meter. And so now let's
go and create the mesh object that we're going to be working with. So go to the objects. We'll
collapse this for now. Add an object. This is going to be a mesh. And we'll just call this
door for now and click OK. And since I'm a little bit more familiar with imperial units, I'm going
go to the properties and then open up the scenes tab. And then here in units, I'm going to set this
to imperial. And then I'm going to be working in inches. You can use whatever units works best for
you. I'm just a bit more familiar with that. So with that set, now let's go ahead and model out
the geometry for the door. So we're going to go ahead and type tab to go into edit mode. Here I'm
going to go to face select mode. And rather than creating this out of one mesh object, I'm going
go ahead and create all of the parts as their own mesh. It'll still be one object, but let's go ahead
and show you what I mean here. And here I'm going to open up and access the move tool so I can move
this geometry. So this is going to be the left style of our door. And what I want to do is I'm
going to go ahead and just move this all the way to the zero point. And actually really quick, I'll
enable vertex snapping. And here we're going to go ahead and move this. I'm going to hold down
control and just snap it to where it's right in line with the base point. And then here I'm going
to go ahead and move it over a specific distance. So here I'm going to type six to make sure that
that's six inches wide for this portion of our panel. And then here I'm going to go ahead and
select this entire mesh object. I can do that by typing L on my keyboard with my cursor over any
portion of this mesh. And so here if I type L, that'll select that entire object. And then here
use shift D to duplicate that. We'll type X to just make sure that it constrains along the X axis.
And then we'll hold down control and snap it to the X dimension. Now we'll do the same thing,
type shift D. And here I'm just going to right click to place it right on top of that other one
and type R to activate the rotation command. I'm going to type Y to constrain it along the Y axis.
And I'll type 90. And this is going to be the top portion of our door. So I'm going to type G.
I'm just going to snap it to this portion of the mesh. And here we'll grab this end and let's move
this in. And then we'll hold down control to snap it here. So there we have the top rail of our door.
I'm going to select this top rail again using the same hotkey with just L with my cursor on this
portion of the mesh that will select that entire top rail. And then we'll type shift D, Z, and then
snap it to the bottom here. Next I'm going to go ahead and create, copy this same portion of the
mesh to be used as the mid rail. So again, shift D and then type Z to constrain along the Z axis.
And here I'm going to just snap it to the bottom panel height empty. And actually maybe I'll bring
this up above and then type G, Z, and then snap it just so the bottom portion of this rail is in line
with the bottom panel height. And then finally let's go and create the center panel for our door.
I'm just going to select this bottom face and I'm going to type shift D to just duplicate that
bottom face. And then I'll right click to place it in the same exact location. And here just so
there's a bit of an inset, I'm going to type S and then Y to scale that along the Y axis. And then here
we will use the extrude tool by typing E and then snap it to our mid rail. And then again we'll go
ahead and type L to just select that entire portion of the mesh. Here we're going to type shift D and
Z and then we'll snap it to the top portion. And then here we'll grab this bottom face and we'll
snap it to the top of our rail. Okay so there we have it. We have our mesh modeled in the way that
we want. Now let's go ahead and type tab to exit edit mode. And then we'll go to the door. Here
we'll expand this, go to the data tab, and we'll go back into edit mode. And now we're going to
assign the vertices. Again I always like to do this wireframe mode with vertex select on. We'll
go and select the top portion of our door. This is going to be assigned to the Z dimension object.
So we'll select that. Here this middle portion of our door is going to be assigned to this new
empty that we created. And we can see that we have this bottom panel height empty. So we'll just go
and assign that. Then I'm going to go into a top view and here I'm going to go ahead and select
just half of this door here. And so just the vertices that I want to move along with the Y
object. We'll assign that to the Y object there. And then just like the cabinet door panel, here
we're going to assign the X dimension objects to these X1 and X2. And so here this portion of the
mesh is assigned to X2. And then this portion of the mesh is assigned to X1. So there we have it.
Now we have all of the vertices assigned to the correct hooks. We'll go and select connect hooks.
And then we'll go and test this out. So grab the X dimension. See if that changes. Also when we flip this
inside out you can see that it still looks correct. And again just like the cabinet door panel there
will be some weirdness if the door is too small. But we just won't have a door with this type that's
that small. Next we'll go and select the X object. Type G. See if that works like we would expect.
And then here the Y dimension. Type G. See the thickness changes correctly. And then now if we go
to our prompts and change the bottom panel height we can see that that's going to adjust our midrail.
And since we're here in the prompt let's go and quickly set up the hide prompt as well. So we'll
select the mesh. We'll go ahead and add a driver to our disabling viewport. And just do the same
thing to where clear out that variable. Add in the hide prompt. Copy that into this property into
the expression bar. And verify that it works. Okay cool. It is hiding the door. And then we'll just
copy this driver to our disable and renders. And then here we'll go to the material tab. We'll
create a material slot for that. And just so I can see what material I want to assign. We're going to
use the entry door panel pointer. Here we'll go ahead and type that in the pointers. Entry door
panels. And just to make sure that we type that in correctly. If we click on update materials.
Cool. We can see that the painted wood white is assigned. But just in case we assign a material
with a texture to it. I'm going to go ahead and go into edit mode. I'm going to select everything by
typing A on the keyboard. Type U to bring up the unwrapping tools. And then we'll just use that
smart UV project again. Again at this point you might want to go into the UV editing. And just
make sure that everything is unwrapped correctly. But I'm going to go ahead and assume that it is
for right now. And then the final step here. We'll go ahead and just give it a better name. We'll
call this double panel. Call it really whatever you want. But with that set. Now we'll go to
the assets tab. And I'll go and save it to the sample directory. And click save current asset
to library. And click OK. And there we have it. Now we have the double panel saved to our library.
Next we're going to be creating this simple window frame. And so this is just the portion
of the window that's added to the perimeter of the window. And so this is going to be a simple
model. It's going to be very similar to creating the door panel. But it's going to have this
rounded edge as well. But you'll notice that the dimensions of this. The Z dimension will be the
of the window. The X dimension will be the width of the window. And then Y will be the depth.
The only thing that we need to keep in mind here when creating this. Is that there's going to be
some prompts that determine what the left, right, top, and bottom window frame width is. And these
prompts will automatically be added to our assembly. But we want to make sure that we
model the geometry according to what we have set here. And so these portions of the window here.
These are exactly three inches. And this is needed because this is combined with the insert
of the window. And Home Builder needs to know how to position the insert of that window into this
frame. And so by reading the information that's assigned in these prompts. That's how it will
position that information. Now we're not going to worry about creating these and making them
parametric. We just want to make sure that the model that we create is the correct size with
what these prompts say. So let's go ahead and get started. So we'll start out in the same way.
We'll go to the Assets tab. Here we're creating a window frame. And so we'll go ahead and create
a new asset. And here open up the sidebar panel. And so like I mentioned before. Here we have these
prompts already created for us. And we can change these to be whatever we want. We just want to make
sure that the mesh that we create corresponds to the correct dimensions that are listed here.
Which in this case is all three inches. So we'll go ahead and create the mesh object. Call this
window frame for now. Click OK. Here we'll go ahead and start modeling out our geometry. I'm
going to type tab to go into edit mode. And I'm going to switch to vertex select mode. And also
turn on the move tool. And here I'll also switch to face select as well. So we'll select this face.
And here I'm going to go ahead and snap it directly to the zero point. And again we'll grab the x
dimension. And we'll type three on our keyboard to make sure that that's exactly three inches.
Type enter. And here we'll type l to select that entire portion of the mesh. Type shift d x. And
snap it here to the x dimension object. Here we'll duplicate that again. Shift d. We'll right click.
And then we're going to rotate it. So we'll type r and then y to rotate that along the y axis.
And then type 90. Enter. And then here we will type g. Hold down control. Snap it to the top.
And then we'll take this. Snap it to the inside face. Type l again to select that entire portion
of the mesh. Type shift d z. And snap it to the bottom. Next since it's common for there to be
casing around the window. We're going to go and select all of these front faces here. And I'm
going to go ahead and pull them outside of the assembly. And so we'll just go ahead and grab on
the y dimension. And here I'm going to type five. And then negative to bring it the opposite
direction. And so here the frame is just going to be extruded outside of the wall. Just that half
of an inch. Next we'll go ahead and select edge select mode. And here I'm just going to select
all of the perimeter edges. And then we'll go ahead and use the bevel command. So I'll type
control b. Remove my cursor out a bit. And then here we'll just kind of scroll up on our cursor
to create more loop cuts. I'll go ahead and left click to confirm that. Now we have the rounded
edge for our window created. And now let's go ahead and assign the geometry. So here let's go
the data tab. We'll enter edit mode. We'll go to wireframe and vertex select. Here we're going to
select all these vertices that we're going to assign to the x dimension. Select all of these
vertices. Assign them to the z. Here I'll go into a top view and select the vertices on the back.
And assign it to the y. And we'll connect the hooks. And verify that everything is correct. So
grab the x dimension. Make sure it moves correctly. Do that same thing for the y. Make sure the depth
is correct. And then the height of the window as well. And we'll go and select material. We'll add
the one pointer that we need for that. And here if we go to our material pointers list. Notice that
we don't have a window frame. But it's very common for the entry door frame and the window frame to
be the same color. And so I'm just going to go ahead and use the entry door frame pointer for this.
And then we'll verify that. Type that in correctly by selecting update. Cool. It does assign it to
the painted wood white. And again just to make sure that it's unwrapped. Let's go into edit mode.
Select everything. Type u. And then smart uv project. And click ok. Again you may need to
go into the uv editing workspace and fine tune how that mesh is unwrapped. I'm not going to worry
about it for right now. I'm just going to go and type tab on my keyboard. And for this we don't
need to implement the hide prompt. I mean we could if we wanted to. But the only reason why we need
to do that for the door panels is the fact that there's a left and a right door panel. And they
do turn on and off based on the options that you have specified for your cabinets and entry doors.
But this there's always going to be a frame. And so we don't need to implement the hide prompt
for this particular assembly. So we'll just go and change the name to rounded window frame.
And here we'll go to the assets. And we'll go and save it to the sample category by clicking save
current asset to library. And there we have it. Now we have the rounded window frame in our library.
So now that we've created the window frame now we're going to create a window insert which is
basically just the assembly that's inserted into the window frame. Which really could be anything.
In this case it's going to be a fixed window with four glass panels. And one thing that you'll want
to realize is that here when we change the y dimension that the window really isn't changing
in size. It's just always going to be positioned in the center of this assembly. You'll also notice
that when we change the x dimension here these dividers that break up the window are going to
always be positioned in the middle of the window. So when we change the x or the z those will always
be positioned. And the way that we accomplish this is by creating these other empties here
that will always be calculated to the center point of the x y and z object. So let's go ahead and get
started. So we'll go and create the assembly. We'll go to the assets tab. This is going to be a window
insert. I'm going to select create new asset. And here before I start creating the mesh I'm going
to go and create the empties that will calculate the center point of the x y and z dimension. So
open up our sidebar. Select one of these. Go to the assembly tab. And here we'll go into the
objects. And we're going to add in some empty objects. So this is going to be the mid x. Click
okay. And I'm going to change the size. This is a bit big. I mean it doesn't really matter but
it's a little distracting. So I'm going to go and just change that to be maybe just one inch. And
then let's add in the other ones really quick. Y. Change this to be one inch as well. And then we'll
add in the mid z object. And this set to one inch as well. So now that we have these added let's go
and add in the drivers that are needed. So since this is the mid z object here we want the z
dimension to calculate the center point of the height of this assembly. And so I'm going to
right click and go ahead and add a driver to the z location. Go to the logic panel. We'll make sure
that we have this selected because here under selected object it's going to show the drivers
for our active object that we have. And so here this is the location z. We'll grab the z dimension
of our window. And we'll delete out that extra variable that blender creates. And I'm just going
to copy the dimension z. Paste it in our formula. And then we'll do divided by two. And you'll see
that's going to position that right in the center. And so let's do that for the rest of them. Here
we'll go to the mid x object. And we'll go and right click and add a driver to the x location.
And we'll do the same thing. We're going to go and grab the x dimension. Delete out that variable.
And we'll copy this and divide it by two. And then finally here for the mid y object we're going to
do the same thing. Add a driver for the y location. Go to the logic panel. Grab the y dimension.
And we'll copy this and divide it by two. Okay so no matter what dimension we change here you'll notice
that that empty object is always going to be positioned in the center of our window just like
we would expect. And so now that we have that done let's go and create our mesh object. So go
to the objects. I'm going to add in a mesh. Let's call this window. And click okay. And so the frame
for the pieces of glass that we're going to have in our window. I'm just going to make them all
two inches. And so here if I select on my mesh type tab to go into edit mode. Now this assembly
I can see the y dimension is six inches. And so here if I select this face. Go to my move tool.
I'm just going to go and move it in the y. I'm going to move it two inches. Hit enter. I'll
select this back face. I'll move it back. Type negative two. And then enter. And so now we have
just this two inch wide frame here. And I'm going to also grab this portion here. We'll move this.
Let's make sure that we're in vertex snapping. I'm going to snap it to here. And then we'll
move it out two inches. So now we have this object that is two inches on the x. And then two inches
on the y. And so now we're going to go ahead and use this piece to create the rest of the frame
for the window. And so we'll type l to select that entire mesh object. Shift d x. Snap it to here.
Type shift d. Right click. And we'll rotate it along the y. 90. And we'll snap it up to the top
here. Grab this face. Snap to the inside. We'll type l again to select that entire piece. Type
shift d z. And snap it to the bottom. And then here we'll go and position the mid rail. And so
we'll type shift d z. I'm just going to snap it to this empty. But you'll notice that it's just
snapping the top vertice to that. And so I'm just going to go ahead and move it in the x one inch
by typing one. And hitting enter. So now it's centered directly where I want it to be. And then
here we will go ahead and type shift d r y. 90. And then we'll go ahead and grab this bottom face.
Snap it to here. And then grab this top face. And snap it to here. And if you wanted to you
could create two separate parts so this mesh isn't overlapping. But I'm not going to really
worry about that at that point. Or at this point. So let's go and create the glass for our window.
So I'm going to grab this bottom face and type shift d to copy that. And I want it to be inset
a bit. So I'm going to type s and y to scale that in just a bit. And again I could create
four separate portions of the mesh for the glass. But again it's not really ever going to be seen.
So I'm just going to type e to extrude this up to the top. And there we have our window. So let's
go and assign the vertices to the hooks. And so here let's go to the data tab. And again let's
switch to wireframe and vertex select mode. And so I'm going to select all of these vertices here.
Assign it to the obj x. I'm going to select the top vertices. Assign it to obj z. I'm going to
go ahead and select this mid rail. And this is going to be the vertice that we want centered on the
height of this assembly. And so this is going to be assigned to this empty that we created. Which in
this case is the mid z object. And then we'll go and select these vertices. And this is going to be
centered on the x. So this is the mid object. And we don't want this to change size. Or at least I
don't want this to change size when I adjust the depth. I just want this entire mesh to move along
with the midpoint of this y. So I'm just going to select everything here. And then assign that to
mid y. So there we have it. So we'll go and click connect hooks. And then we'll just test this out
here. So I'll go ahead and type g to move it along the x. And that is moving exactly how I would want.
Here the z dimension is adjusting exactly how I want. And then the y dimension. Again it's not
changing size. It's just positioning that object in the center of the window. Now we can assign
the materials to this. So we'll go to the material tab. And we'll select on our mesh object type tab
to go into edit mode. And I'm going to create two material slots for this. Because I want a material
that's going to be assigned to the frame for the glass. And then we're going to have the material
that is the glass. And so we'll create two of these. And by default the entire mesh is always
assigned to this top pointer. Or to this top slot. And so I'm going to go ahead and make this the
glass pointer. So for the pointer. And I can see if I go to my material options. We do have a
pointer that's just glass. And so here we'll go and assign that to glass. And then we have a window
metal frame. And it's typically not assigned to polished chrome. Typically it's aluminum or wood.
And if it's aluminum then it's like coated in white or black or something along those lines.
But we can always adjust what material is assigned to this. I'm going to go ahead and just assign
this frame for the glass to the window metal frame. So we'll go and select this. And here we
still need to assign the glass to this second pointer. And so here I'm going to go ahead and
type L to make sure that we just select that portion of the mesh. And then we will assign
that. And so with that done we can go ahead and select update materials. Which we can see assigns
those materials. Here in material mode we have the glass for the window portion. And then the
metal frame. Which again we could always just adjust what material is assigned to that pointer
to change how this looks. But I'll just go and leave it as it is right now. One thing that you
should keep in mind is if there's any additional modifiers that you want to add to your object.
You can always do that. Here if I go to the pointer interface and go to my modifiers. Here
these are all the hook modifiers that are created when we click the connect hooks option. But what
I'm going to do is I'm just going to add in a bevel to this entire mesh. And by default that's
too much. I'm going to go and just type in 0.1. And so we can see it's just going to create this
little bevel. Maybe that's still too much. Just do 0.01. And so that just kind of creates this
tiny bevel along the edge. And you can just kind of see how these parts connect. And so it just
adds a good amount of detail. And so with that done here we'll go ahead and clear out the materials
that are assigned. Just so those aren't saved with our assembly. Again those will automatically be
assigned when we add in windows. When we're creating our rooms in the future. But with that
done let's go and collapse this too. And then we'll go to the assets tab. And I'm going to save
it to the sample directory. Click save current asset to library. So here I haven't changed the
name. It'll always let you know that a file already exists with this name. And so rather
than keeping that name let's just call this fixed window. And now when we go to save. Now it'll let
us know what name that we're saving. Click OK. And there we have it. Now we have our fixed window
saved to our library. So this is the end of the essential training video for creating assets for
HomeBuilder. But this is just the beginning of the HomeBuilder project. There will be a lot
of different types of assets added to the HomeBuilder library including furniture, wall
paneling, fireplace mantles, lighting fixtures, all sorts of stuff. So the training series will be
Also while I showed you how to create several different types of assets in this series
I imagine there will still be a number of questions asked. So I'm going to be creating
additional training videos based on the questions I receive. I'll also be creating a Patreon where
I'll release more detailed information and helpful tips and tricks. So be on the lookout for that.
If you missed any videos in this tutorial series a link to the entire series will be in the
I'd like to thank you for taking the time to watch this and I'll see you in the next one.
