Ultimate Beginners Guide To Starting 3D Printing In 2025!

Technology Information
13 followers
42 Video Views·Mar 28, 2026
Every other day it seems like I'm getting an email,
a comment, or even a DM asking me
where do I start 3D printing?
And honestly, I get it.
There's a ton of information out there
on YouTube and on Google.
And I get it, when I'm watching these videos myself,
and I've only been 3D printing for a couple of months now,
even I get overwhelmed sometimes.
I actually wanted to make this video
because I was watching this one specific video.
It was a great video,
but I realized that it was so much information,
it felt very similar to Michael Jordan
teaching me to dribble for the very first time.
Not that the information is bad,
but he is just so far removed
from the first time he ever learned to dribble a basketball.
It's probably really hard for him to relate.
So that's why I'm making this video right here.
This is gonna be the ultimate beginner's guide
to starting 3D printing in 2025.
Before we get started,
I am gonna break this video up into a couple of sections
so you can definitely check the timestamps down below
to figure out if you already started 3D printing,
if you need some more information.
This is gonna be very high level,
but there's gonna be some good information in there.
All right, so you decided to start 3D printing.
Awesome job, you're gonna love it.
But the first question you need to ask yourself,
is this gonna just be simply for fun
because you wanna print some cosplay stuff
like this Deadpool helmet,
or are you going to try to make money with 3D printing?
Right now, I do wanna let you guys know,
this video specifically is just gonna be
if you wanna do fun things,
printing cosplay, printing Batman bus,
printing little cool designs like this.
This video is gonna be for you.
So if you are looking to make money with 3D printing,
I wouldn't click off this video quite yet
because one, there's gonna probably
still be some valuable information
that's going to ring true,
even if you're just looking to make money.
But also, I'm gonna be announcing
the giveaway winner for the filament,
as well as I'm actually gonna be doing
another giveaway as well.
So make sure you watch this whole way through
and make sure you subscribe with the bell notification on.
We're gonna be doing giveaways
for our next probably four videos, I think.
I have four lined up.
Four giveaways leading up to the big one
when we get to 10K subscribers as well.
So make sure you're subscribed either way.
All right, so you figured out
you wanna start 3D printing
and you figured out you wanna start doing it for fun.
The first question that you're gonna need answered
is what printer do you go with?
All right, so if you are a beginner,
there really is only one correct answer,
in my humble opinion.
And that's gonna be the BambooLab printers.
I know there's a lot of things going on
with BambooLab printers.
So if you guys do own a print farm
or you're running a print farm
or you're even really advanced
when it comes to 3D printing,
this is not gonna be the video
where we discuss all the things going on with BambooLabs.
Just know that if you're a beginner,
you're not gonna have any issues or problems
that you've been seeing online
with these BambooLab printers.
So my recommendation for beginners
is gonna be the BambooLab printers.
And we're gonna get into which ones I recommend and why.
All right, so I really do have two,
sometimes three recommendations when it comes to printers.
You're gonna have to figure out your budget,
which we're gonna go into.
But my recommendation, the first one I always recommend,
and it's not just because I have three of them,
but the first one is gonna be the BambooLab P1S
with the AMS.
We're gonna get into that in a second,
but the P1S is my top number one rated printer.
Now, the second printer is gonna be the A1.
Again, with the AMS light, absolutely.
Whether you go with the P1S or the A1,
make sure you get the AMS or the AMS light system.
In my opinion, I just think it's more fun to print
with multicolors so you don't have to worry about,
oh, I only can print with one color of filament.
I just recommend, if you're starting
and you're gonna be doing this for fun,
picking up the AMS system.
It's just gonna be a lot more fun for you.
Now, we are gonna get into pricing,
but first I wanna tell you why I recommend BambooLab.
The first reason why I recommend BambooLabs
is they simply just work.
If you're looking to get into 3D printing for fun,
you're probably not a tinkerer, or even if you are,
you shouldn't be going with BambooLabs
in the first place then.
If you're a tinkerer and someone who really likes
to get in there and play with their machines,
you're probably a little advanced for this video anyway.
But if you're a normal person like myself
just a couple months ago, I just wanted a printer
that worked and I wanted to be able
to click a couple buttons and get a Deadpool helmet
or a phone dock, which is actually the reason
I started 3D printing, was this phone dock right here.
So, I like BambooLab.
First reason why is it just works.
Second reason is when it comes to taking out the box,
the unboxing experience is kinda crazy actually.
It takes all of 15, maybe 20 minutes
if you're filming like I was, to put the printer together
to go from having a box to having something
that you can click print on.
It's gonna take you about no more than 30 minutes
to get it unboxed and have a new Benchy printed out
on your new printer.
So, really easy to put together.
The second reason is you actually don't even need
a computer for a BambooLab.
You can actually just use their app,
which we're gonna go into later on,
but you can just use their app.
You don't even actually need a computer
to work one of these printers.
So, that's another reason why.
And the last reason why I recommend BambooLabs
is even though we are gonna get into pricing here shortly,
even though they're not the cheapest printers out there,
when it comes to the value that is there for the price,
it's kind of unmatched in my personal opinion.
I do have some experience with other printers as well
and for what you pay for, for the printers,
you get a ton of value.
It's probably worth a little bit more
in my personal opinion as well.
So, now let's get into pricing,
which might scare some of you guys away
from this printer here.
Don't worry, I do have some alternatives.
In my opinion, if you can swing it,
I would go with the P1S and the AMS,
which is gonna run you about $799 right now on sale.
If you just fell out of your seat, hold on, let me explain.
So, the printer itself can be had for $599
and then you could technically later on
buy the AMS system down the road for $250.
So, this way you're obviously gonna save about $50.
I still would recommend the P1S by itself
if you're looking to start a business.
But if you're looking to have fun,
having the AMS light system
that print all different types of color filament together
is gonna be more fun, which again,
purpose of this video is fun.
I would definitely go with both of these.
Now, the difference between this and the A1
is gonna be some of the things that you're gonna see
is this is what's called a CoreYX machine.
So, the build plate is gonna go up and down
and the head or the extruder where the filament comes out of
is gonna move around the build plate and go up and down.
I'll explain a little bit more of that later,
but just know that's what makes it
a little bit more expensive.
On top of that, the enclosure
is gonna make it a little bit more expensive
and this is a little bit faster than the A1.
But if $799 with the A1 or with the P1S
is just a little bit too expensive,
let's talk about the A1.
All right, so when I first looked at both of these printers,
I was so torn and I actually originally thought
I was just gonna get the A1 and I was gonna be done.
So, I actually, my first printer was the P1S
because I did a little bit more research
and realized that for the value,
it's gonna be about 10 to 15% faster than the A1.
And this one is what's called a bed slinger,
which means the bed is gonna move back and forth
as the extruder head goes up and down
and moves around as well.
So, this only moves left to right
while the bed moves forward and back
and then the extruder will go up and down as well.
So again, talking price, the A1 with the AMS Lite
is gonna run you about $489, I believe, right now on sale
or you can just get the printer itself for $339.
Now, if you're still saying the A1
or even the P1S is just out of the budget,
you can actually pick up the BambooLab A1 Mini for $389,
actually $349, sorry, you can pick it up for $349.
I just personally, again, this is all about fun,
that smaller build plate, unless you have a small area
or you're not gonna be printing helmets,
you're just gonna be like,
hey, I just wanna print little desk trinkets,
the A1 Mini, it just has such a small build plate
that I just wouldn't recommend it for the beginner.
Not that it's a bad printer at all,
it's literally just the A1, it's just a little bit smaller.
The bed size is 180 millimeters by 180 millimeters
where this one is 256 by 256,
so you obviously can tell how big of a difference
it's gonna be between the A1 and the A1 Mini.
And the nice thing about the A1
is it actually uses the same build plate as the P1S
and some of the BambooLab's higher printers as well.
All right, guys, so at this point,
you figured out you wanna start 3D printing,
you wanna start 3D printing for fun,
you know what printer company you're going with
and you know what printer you're going with,
now the next thing is gonna be the filament.
So this pile of plastic is the actual reason
why I decided to create this video.
I watched a ton of videos when I was getting started
and the common theme was, hey, just go buy PLA,
which is a type of filament, and you'll be good.
And then I started by myself going on Amazon
and seeing there's different types of PLA
and different types of filament.
So let's talk about it for a quick second.
So there's regular PLA.
You can search on Amazon, you can find regular PLA.
Then you're also gonna find high-speed PLA.
You're gonna find silk PLA.
You're gonna find PLA Plus.
You're gonna find PLA Matte.
You're gonna find Tough PLA.
You're gonna find PLA Light.
And there's even one called Hyper PLA.
There is just a ton of PLA out there
and I realized that this is one of those things
where all of these guys have been 3D printing
for such a long time.
They're right in telling you to start with PLA,
which I will tell you to also start with.
But what kind of PLA do you go with?
So I just wanna make this super quick and concise
and let you know what you should start out with.
So cutting through all of the noise
that you're gonna see when you go on Amazon,
one, I'm gonna have all of these things linked down below
so you're not gonna have to worry about it.
I'm gonna have everything set up
where you can just go down there and buy each.
Now I realize that I might've skipped one part too.
So what is PLA?
It's just plastic.
It's polylactic acid, I believe is what it stands for.
But with the PLA, what the filament's gonna actually do
is this is gonna be put into your AMS system
and it's going to get fed into the extruder head.
And what that acts like is, think about a hot glue gun.
Those sticks of glue that go in there, that's the filament.
And the hot glue gun itself is the extruder head.
So that's gonna go layer by layer to create your design.
So that's the easiest way to look at it.
Again, super high level for this.
And now I do wanna get into the giveaways.
So I wanna announce the winner
for the giveaway for last week.
And then I'm gonna actually talk
about the giveaway for this week.
So let's go ahead and talk about the winners from last week.
All right guys, so here we go.
Gonna go ahead and pick the winner of the Ujoy Bile.
The two rolls of filaments
are gonna be two different winners here.
So gonna go ahead and get the first one rolling.
So let's see who it is.
All right, Grocery Bag Hoarders.
Sherry, congratulations, you are the first winner.
So Sherry Coleman, if you wanna reach out to me via email,
you are going to be receiving one of the rolls of filament.
I appreciate you for entering.
All right, so Sherry,
if you wanna reach out to me via email,
I will get that shipped off to you.
And the next winner is going to be SD,
I'm not gonna even pronounce that,
but right here, congratulations.
Those are the under drawer mounts.
Maker World is cool because it's actually made by Bamboo Lab
who is the makers of your new printer
because you listened to me and went with either the A1,
the P1S or the A1 Mini.
So they actually put files on there
and other people can load 3D files on that website
for you to print as well.
So you can start with Maker World.
My recommendation actually in the beginning
is to not even worry about websites like this,
is actually to get the Bamboo Handy app on your phone.
So when you pull up the Bamboo Handy app on your phone,
you can actually go right on your phone,
set up your printer obviously,
and then you can pick items to print right off your phone.
You'd never actually even need to download any software
on your computer.
But if you do decide to put software on your computer,
which we're gonna talk about in the next section,
these are the websites you're gonna wanna go to.
All right, so the first place
is gonna be makerworld.com slash EN.
Again, this is gonna be linked down below
so you're not gonna have to worry about it.
But this place is a awesome spot to go
to kind of get a variety of things.
So as you see me scrolling through here,
there are a ton of different cool items that you can print
and also some functional ones as well.
I would put a little caveat out on this one,
not as big as the next one that we're gonna talk about,
but there is some not safe for work content
on Maker World and Printables
and actually all of the 3D websites.
So just make sure if you are a parent watching this video,
you don't just give your kids free reigns of these websites.
The 3D printing community can be a little weird sometimes
and make some models that I'm like, why did you do that?
But make sure you're just checking off
the do not show not safe for work content,
just a little PSA there.
So that's the first website.
The next website you're gonna wanna look at
is gonna be printables.com.
Now this one is really heavy in the not safe for work
so I'm actually not gonna even scroll too much.
I don't spend much time on this one,
mainly because I find a lot of the things
that I need to print are actually on Maker World.
But this one here, the same thing.
If you want to find an item to print,
let's say you wanna print these cable management items,
I don't even know what those are called,
cable organizers, there we go.
You come to the item that you wanna print
and then you hit download, you open up Bamboo Studio
and then you import that STL or that M3 file
into the slicer and then you hit print.
Makes it really easy.
And then the last place is gonna be Thingiverse
which is probably what you've heard of
if you've heard about 3D printing.
Very similar website.
Again, I believe there's some
not safe for work content on here.
I don't know, I'm not gonna scroll too much
but let's say you wanna print this item right here.
You just go here.
The only thing I don't like about Thingiverse
is if you click download here, you have to wait.
There's a ton of ads.
You gotta wait about 30 seconds to print the item.
So I normally go there last
when I'm looking for an item to print.
All right, so those are the big three websites
that I tend to go to whenever I'm looking
for something to print with my printer.
If you decide, hey, I'm just gonna be printing this for,
I'm just gonna be going for fun
and you print one of these items
and then you say, hey, you wanna sell them,
you cannot do that.
One of the big things that I did not know
when I was looking into this hobby
is you can't just take a file that you find online,
print it out and then go sell it on Etsy or on Amazon
or even at your local market.
You do have to do what's called either give attribution
or some people just say
you can't sell their item regardless.
There's another aspect of it too.
Regardless of what the 3D modeler says,
you could not go sell this Batman bust either way
because this is property of DC.
So just make sure you're aware of that.
If you are looking to print something
and you're looking to sell it, make sure you subscribe
because we're gonna go over how that works
in the next video where 3D printing for business
and how to start a business.
That's gonna be in the other video.
So for now, just make sure that you are sticking
to making these things for your home only.
All right guys, so at this point,
we figured out we wanna start 3D printing.
We wanna do it for fun.
We know what printing company we're going with.
We know what printer we're going with.
We know what filament we're going with.
And we know what website we're using to download our items.
Last thing is the slicer.
I'm not gonna go super granular on this.
High level of what a slicer does.
It's the software on your computer
that talks between the website or the file that you upload
and that software talks to the printer for you.
That's the easiest way to look at the slicer.
I don't like the word slicer,
but really when you think about it,
it's kind of slicing the model.
So when the computer looks at something like this,
it says, I need to slice this layer by layer
and tell the printer or program the printer
to go layer by layer for this to design
or to make this item right here.
So this is actually a really good one
because you can actually see the layers on this
where each single turn of the extruder head
sliced the item and it's going top, top, top, top.
And it's just going on top of it, on top of it,
on top of it to then finally create something like this.
Again, not gonna go super granular when it comes to slicer.
I would just recommend
if you're buying the Bamboo Lab printer,
it's gonna come with its own slicer or software.
Just download that, use that until you outgrow it
and then do your own research
if you wanna start using Orca Slicer or anything like that,
you can do that on the backend.
In the beginning, just stick with,
and if you don't go with a Bamboo Lab printer,
you go with a Creality,
most of the manufacturers right now have their own software.
Just use the manufacturer given one
because it has all of the programs
for the printer settings in there for you.
Don't get too fancy.
All right, guys, so at this point, getting close to the end,
you know that you wanna start 3D printing,
you know you wanna do it for fun,
you know what printer company you're going with,
you know what printer you're going with,
you know what filament you're going with,
you know what files you're gonna be printing
and you know how to print them with software.
The last thing you're gonna want is some tools
to make your 3D printing journey a little bit easier.
Let's talk about the tools and we'll wrap this video up.
Talking tools.
One item you're gonna need is what's called a deburring tool.
It is a not really sharp knife
that's used to actually clean up the edges of your 3D prints
and make sure they look nice and clean.
The next is gonna be pliers of some sort.
I have this pair here.
Sometimes the printers will actually come
with these little snips here as well,
but I recommend a good pair of pliers
so then you can take off the supports
that are sometimes printed on your models.
You could take these off a lot easier
or you can cut them off with these.
The next item is gonna be a bed scraper.
There's a couple of different bed scrapers
that you can go with.
They're both gonna be 3D printed.
So you can have this one right here,
which is a 3D printed model.
This one's also 3D printed,
but when you buy your BambooLab printer,
these actually come with metal blades.
And all you have to do is actually print the plastic piece,
but BambooLab will actually give you all the hardware
that you need to create one of these little bed scrapers.
I would recommend picking up one of these
or printing one of these
because this is great for getting those prints
off of the bed when they stick.
Next is gonna be a butane torch.
Some people use a heat gun.
I'll be honest,
these next three are probably a little bit controversial
and it all depends on who you talk to.
Again, I'm just gonna give it to you from,
I just started 3D printing a couple months ago.
This is what I've been using and this works for me.
So a butane torch, some people say use a heat gun.
I use a butane torch.
I hit this quickly whenever I have prints
that have some stringing on it
or just don't look the greatest.
I hit this really quick.
I don't hold it on top.
I just go really quick over it
and it cleans up a lot of the strings.
The next item is gonna be glue sticks.
Also controversial.
I don't know why,
because the manufacturers,
some manufacturers will literally ship out
a glue stick with the printer.
So I don't know why this one is so talked about
as though you shouldn't do that.
I use some Elmer's glue whenever I,
not on every print.
Whenever I have something that is having a hard time
sticking to the bed,
then I will start using some glue sticks.
And then the last thing is gonna be
some isopropyl alcohol,
some 99% isopropyl alcohol
and a rag or a microfiber cloth.
You spray this a little bit on your bed.
Again, when you're having bed adhesion problems,
because a lot of times you'll touch that bed plate,
which you don't want to,
but a lot of times you'll touch the bed plate.
Put a little bit of this on it and just wipe it down.
That's all you need.
You're gonna have better bed adhesion for sure.
And at this point,
I hope I was able to give you guys all of the information,
all the tools and all the advice that I wish I had
when I first started 3D printing in this video here.
So if you got any value out of this,
if you could please leave a thumbs up on the video,
let me know in the comment section down below
what kind of value you got out of this.
And obviously make sure you get in for the giveaway
because we're gonna be giving that away on the 8th,
regardless of when this video comes out, by the way,
it's still gonna be the 8th when we do the drawing.
But I hope you guys are ready to start 3D printing.
I'll be honest, it's a super addicting hobby.
Don't just start with one roll of PLA.
Grab you a couple of more.
You're going to fall in love with the hobby.
I hope that this is a good place
where a lot of people can come.
Hopefully my channel is a good place
where everyone can come, get some advice,
not from an expert, by no means am I an expert.
This is more exhibition where I'm just going through
and documenting the things I'm finding
and I'm learning and I'm seeing.
So hopefully you guys can go print out some cool things.
Let me know in the comment section below
some of the things that you're gonna be printing out.
I love to hear all of the stories.
And if there's enough interest,
a lot of people have been asking me for a Discord.
If you're watching this video this far,
you're probably one of the people
who consistently watch my videos.
Let me know in the comment section below,
do you want me to start a Discord?
I'm thinking about it, I think it's a good idea.
Let me know.
Other than that guys, I will catch you in next week's video.
Next week's video is either going to be
our Valentine's Day video or the business video.
So make sure you're subscribed to catch either one of those
but I'll catch you guys in the next video.
Peace.
