🌸 DISCLOSURE This video is not sponsored. Some links above may be affiliate links. Thanks so much for supporting my channel by using my affiliate links! :) Music: epidemicsound.com/referral/9mkkpu/ #diy#handbag#sewing#handicraft#bag#bagtutorial
AI Generated·May contain errors
Hi guys, welcome back to my channel.
My name is Erica.
Today we're gonna be making this really cute
sew together bag by Sew Demented.
Hi everyone and welcome back to my channel.
My name is Erica.
I have a really fun video for you today.
We are gonna be making this sew together bag.
It has three zipper pockets inside.
It has four inside little kind of open panels.
Lots of possibilities and there are so many things
that you can do with this bag to make it unique and fun.
The bag features three zipper pockets
and then four open panel areas
where you can put all kinds of different things.
It is by a designer called Sew Demented
and this is what the pattern looks like.
I will have a link where you can get the pattern
for this project below
and it has all of your cutting instructions and everything.
I'm not gonna give away too much of that here
in today's video because I do want you to go
and support Sew Demented and this bag pattern
because I think it's so much fun.
But I am gonna show you the assembly
because it is a little bit finicky.
It can be tricky in spots
and I think it's hard to read on paper
but I think seeing it in video,
a lot of you would be more willing to make it.
I did talk to the designer of this bag
and got the okay to do a tutorial for you guys
to help you put this bag together.
So for this project, like I said,
you're gonna wanna get that pattern.
You're gonna cut out all of your fabric
according to that pattern
and then you're also going to need some interfacing.
Now I used a plain fusible fleece
for my inside interfacing
for like these little pockets and stuff here.
It's just a little bit thinner
but still a little bit of interfacing
to give it some stability.
And then on the outside of my bag, I used a sew-in foam.
They do have a fusible kind.
I did not have that.
I just had the non-fusible so I did have to quilt it.
If you use the fusible kind,
you don't even have to quilt this bag if you don't want to.
So I really prefer that for the outside edge of this bag.
I think it gives it a lot of stability.
As you can see, it's doing a great job holding its shape.
Now I mentioned I made three of these.
This one that we're gonna be making in today's video
is using the Ambleside Fabric Collection by Brenda Riddle.
And I just did a simple patchwork on the front here
and I'll talk more about how I created this pattern
in the video once we get started.
I also created this beautiful bag right here
and it's just got a beautiful vintage vibe
and I'll show you the inside as well.
And actually, I mixed some other Brenda Riddle fabrics
for these side panels and my binding
because I just had a mini charm pack of that fabric.
So all the insides here are from my stash,
but this little patchwork on the outside,
isn't that just such a fun vintage fabric?
I also made this one.
These are all three for my daughters for Christmas
and I think they're gonna love them.
This fabric is Nest by Lella Boutique.
I did a jelly roll rug in this fabric.
It's one of my favorite lines.
It's so much fun.
I did a little patchwork on this one
and then I just sewed together some strips
and cut them down to the right size
and added them as a little accent stripe on the back.
So you can have a lot of fun
with the outside panels of this pattern.
So those are my three bags.
I just wanted to share them with you
so you could see a few different ways
to customize your outside panel.
So let's go ahead and get started with today's tutorial.
It is a little bit longer,
but I did wanna show you each step of the way
so you can get through this bag successfully.
One of the supplies you're gonna need
are some fun zippers.
I chose three different colors that matched my fabric
and in the pattern, she has the exact size of zipper needed.
I prefer working with longer zippers.
That way I can cut them down to size
and make everything nice and perfect
and so that's what I'm gonna be doing in today's video.
So the only zipper that I purchased
that is the exact size she asked for is this longer zipper,
but I'm gonna show you in today's video
how to cut these down to fit.
I just purchased regular poly zippers from my shop
and as you can see, one of them is a little longer
because they didn't have this size in this color.
So we're gonna make it work and also it doesn't matter
because like I said, I'm cutting them down anyway.
The other supplies that I use a lot in this
are these Wonder Clips.
So I've got an ample supply of Wonder Clips.
I've got some scissors.
I have my rotary trimmer
and then I've got a hair marker slash point turner.
I use this one a lot in this bag.
Really helps getting all of those corners pushed out
and then of course I used my rotary trimmer
to get all of my pieces cut out initially.
So here's the outside panel for this particular bag.
The pattern shows you how to make it
with just one solid piece of fabric for your outside,
but you can take those measurements then
and just have fun with it.
And so I did a little patchwork panel on the back here
and then I just did this little diagonal patchwork panel
on the front and then I went ahead and pre-quilted it
so it's just ready to go
and now I can just grab all my other pieces
and assemble my bag.
Here are the three outer panels that I pre-made.
I do not have patterns for them.
I was just kind of winging it honestly.
This first bag I used a charm pack.
So these are two, mini charms, sorry.
These are two and a half inch squares
and then I just trimmed it down to size
once I was done quilting it.
This one I used a mini charm pack as well
and then for the other side,
I just did some background fabric
and I just kind of made up this little strip as I went.
And then for this one,
these are one and a half inch squares
and I went ahead and sewed them in rows like this
and then sewed those rows together
and these little background strips right here
are one and a half
and I think I made them by about three and a half
or maybe even four inches so I had plenty of wiggle room
so that when I sewed these rows together,
I could trim it down to the size I need.
So just have a lot of fun with this.
I didn't do a whole lot of measuring.
I just kind of eyeballed things,
sewed them up and trimmed them down to size when I was done.
The other tip I have for you on this outside panel
is I actually made mine larger
than what the pattern calls for.
So I suggest making your outside panel
about a half an inch wider and a half an inch longer
than what the pattern calls for.
The reason that I did that
is because when you start quilting all of this
and this came in really handy on this one,
the quilting draws the fabric in a little bit
and shrinks your overall size of your piece.
If you do plan on quilting,
definitely plan on making your outer panel
about a half an inch, both ways,
larger than what the pattern calls for.
If you don't plan on quilting it at all,
you can definitely just cut it exactly to size
and you should be good to go.
So here's the outer panel for the one we're making.
This time I used a sew-in foam.
Here's my outer panel.
And then here are my inner panels.
And so you know what we're looking at here.
Here are my four inner panels
and those are these sections,
these colorful inside sections.
And then you also need your lining fabric
and that is the fabric that's inside your pockets.
And then you also need these side panels
and those are these guys right here on the sides.
Now one thing that I did do
was I pre-fused my fusible to my fabric.
And one thing that I wanted to share with you
that I did a little differently than in the pattern,
the pattern has your fusible
the exact same size as your fabric.
And I found that that was just a lot of bulk
when you were sewing these together.
So I actually made my fusible just slightly smaller,
about a quarter of an inch smaller than my actual fabric.
And that really helped out,
especially on these side panels
and when you're putting everything together
because it's just a lot of bulk as you can see
when you have all of these seams
coming together on these bags.
So that's just a little tip that I did.
You don't have to do that.
You can follow the pattern as it was written
but I just wanted to share that
because I felt like it really did help
reduce some of the bulk around the edges.
So I'm gonna start out with our side panels.
And so this is my lining and this is my outside
and these are so easy to put together
because what we're gonna be doing here
is we're going to place them right sides together.
So the outside panel and the lining panel
are gonna go right sides together.
So we're gonna take this over to our sewing machine
and we're gonna sew just along these top edges.
You're not gonna sew along this bottom raw edge.
We're just gonna leave that.
So again, just sew up the sides and across the top.
All right, so that's that.
And then now we are going to flip these right side out.
Before I do that,
I am going to just trim off this corner just slightly.
It's gonna help us have a tighter corner
when we go to press it inside out.
You do not want to trim through your stitch line, of course.
It's just nice to get rid of that piece.
And then we can take this and just flip it right side out
because super easy, right?
Just like that.
And then I like to use my hair marker
and I just press right along this crease.
Get that corner pressed out really nicely.
And then I will take this to my iron.
So here are my two panels.
I'm just gonna give them a quick press.
This is my new Laura Star.
And man, I love this thing.
These panels get so nice and flat with this.
And look at that.
Oh my gosh, perfect, every time.
Okay, so here are these two side panels.
The next thing we need to do
is take these over to our machine
and we're just going to run a top stitch up the sides
and across the top.
Leave your raw edge open.
Again, I'm using a quarter inch seam allowance.
I'm increasing to about a, let's go with a 4.0.
All right, so here are our finished side panels.
We can go ahead and set these aside.
They're gonna be ready to go when we are.
Now, the next thing that we're going to be making
is the zipper portion.
And this is the portion that takes the most time
and probably confuses the most people.
So you're gonna need to have your linings of your pockets.
Those are gonna be right here, this inside portion.
And then you're gonna need these pieces,
these larger pieces that go in between the pockets.
So I've just chosen four different colors.
You can make them all the same if you want.
And then I did make all my lining pieces the same color.
Like I mentioned before,
I have already pre-fused on my interfacing for these.
So now we're ready to go.
So this is my long zipper.
This is the zipper that goes all the way
around the outside of the bag.
So I'm gonna set that one out of my way
so I don't get confused.
And then here are my fun color zippers for my three pockets.
And what I find is the most helpful for this step
is to lay everything out before I sew it together.
That way I know what goes where.
So I'm gonna lay them out in the order
that I want them to go.
And then I'm gonna decide what zipper I want to go where.
And I think I want them not to be touching their colors.
All right, so I'm trying to fit everything on my screen here
but I think you get the idea.
I just put everything in order
so that I know which order I'm gonna be sewing them in.
The other thing I'm doing is I'm making sure
that my zipper tabs are all going the same way
because when you start putting this together,
things can get back and forth
and you can end up with a zipper down here.
So just make sure they're all going the same way.
And then that way when we take this
and assemble it, we'll be good to go.
I'm also going to layer my lining pieces right here
so that I have two lining pieces.
There's two here, they're just layered,
that go with each pocket.
And I just already know that.
I can set these ones aside and add my lining to this one.
And this is gonna be helpful
if you have a different color lining,
say for one of your pockets.
I'm just doing the same color for all mine
so it doesn't really matter.
But if you were doing a different one
and you wanted matching lining for these,
that would be a helpful step.
Okay, I'm gonna go ahead and take these two
and just scoot them out of the way.
They're still in order over here.
I'm not messing with them.
I'm just pushing them out of the way
so that we can work on our first pocket.
And the way that this is going to go
is we're going to take our pocket piece right side up.
We're going to place our zipper
with the zipper pull right side down.
Now, if you have purchased the exact size zipper,
you're gonna be lining up your tab
at the ends of your fabric panel.
Since I have a longer zipper,
I can actually put it down here and it's out of my way
and I don't even have to worry about that panel at all
or the zipper head.
I don't have to worry about stitching over it at all.
And then we're gonna take our lining piece
and we're gonna place that right side down.
So we've got our panel right side up,
our zipper right side down,
and our lining piece right side down.
And here's where all these Wonder Clips
are gonna come in handy.
We're just gonna clip all of these in a row like that.
And then we're gonna take this to our machine
and we're just gonna sew right down this edge using,
and you can use a zipper foot or whatever foot you have
that can get closest to this.
All right, and here we are.
This is what it's looking like.
We went ahead and stitched right along there.
I'm going to first finger press this back
and then finger press this back.
And then I'm gonna hit this with my iron
and you just wanna make sure that these side edges
are lined up right here along this side
and that your zipper is kind of pulled out nice and snug.
You just wanna make sure that it's nice and straight.
All right, so here is our first panel.
Now the next thing we're gonna do
is take this to our machine
and we're just gonna run a stitch,
straight stitch right down this edge.
And again, I'm just gonna be using
a little bit of an increased stitch length
just to make it look a little bit more handmade.
And I'm gonna go ahead and keep my zipper foot on
and just use that because why be going back and forth?
So I'm kind of just eyeballing it
so I can get about a 1 1⁄8 inch stitch there.
Okay, and here we've got our panel.
I do have our top stitch ran across there
so it's all nice and ready to go
and our lining is pulled back and ready to go.
Now we're basically gonna be doing this all the way down.
So this, I'm gonna show you
but it's basically the same method.
So here's our next panel
and here is our next lining piece.
So again, I like to just have my main panel right side up,
my lining right side down and the zipper right side down.
So we're gonna go ahead and just flip this
so it's right side down on top of there.
You're gonna make sure your side edges
are all lining up with the panel beneath
and then we can line up our lining right side down.
And again, I'm just trying to line up these side edges.
So we're just gonna put some clips on there,
take this to our machine
and again, stitch right down this edge.
Here's our panel.
Again, I'm just gonna finger press this
and then we'll flip it open,
press this panel back just slightly
and I just like to give it a little bit of a finger press,
make sure this is nice and flat.
And now we can take this back to the machine
and again, run a stitch right along this edge.
Now, one thing I wanted to mention,
if you don't have a zipper that's longer like mine,
you're gonna wanna open your zipper tab
so it's about halfway or so.
You can sew down the edge,
leave your needle in the down position
and lift up your presser foot
and then just kind of wiggle this back out of the way
and then finish stitching.
So if you didn't get longer zippers, that's okay
but this is one of the reasons I like to
because this zipper head is just out of our way
and we don't have to worry about it.
And so now we've got one zipper done
and these are the outer panels
and as you can see, when we stitch them together,
that's gonna be our lining piece.
Okay, so now we're gonna be adding
the other two pockets the same exact way.
Now, here is our next pocket.
We've got our lining pieces and our zipper.
Again, I'm gonna be making sure
that my zipper heads are both on the same end
and I'm going to again have my piece,
my fabric panel right side up,
my zipper right side down
and then I'm gonna grab one of my lining pieces
and right side down.
We're gonna clip it in place
and again, take it and sew right down this edge.
Again, I'm gonna finger press it
and then flip it back.
Take this to our machine and sew along this edge.
Again, we've got our other panel
and our other lining piece.
So, panel right side up, zipper right side down.
So, I'm just gonna take this whole thing and flip it over.
So, it's right side down.
Again, I've got all these side pieces lined up.
Again, my lining right side down
and we're gonna sew right down this edge.
Again, sew right down this edge, top stitch.
Okay, so we've got our two done.
We just have one more to do.
Here's our other zipper and our other lining.
We're gonna place our zipper right side down,
making sure the zipper head is the same as the other bags
and then our lining piece right side down
and sew down this edge.
Again, press and I usually just fingernail press.
Flip it back.
We're gonna take it and top stitch.
All right, last panel.
So, we've got our panel right side up.
We're gonna flip our zipper right side down
and our last lining panel, sew along this edge
and then sew again down this edge.
All right, so here's our panel.
It's all done.
We've got all three zippers sewn into our panels
and then on the inside, it should look like this
where you've got your zipper
and your lining pieces right side up.
Okay, so we're gonna flip that over now
and now we're going to get out our ruler
and we're gonna be marking 3 1⁄4 inches away
from the center of our zipper line.
So, I'm taking my 3 1⁄4 line,
that's this white line right here
and I'm just putting it right in the center
of my zipper teeth.
See how there's like that little divot
right down the center of your zipper
and I'm just gonna line that up just like that
and I'm going to take a friction erasable pen
because that will come off a little bit later
and we're just gonna draw a line just like that
and we're gonna do that to the right side
of all three zippers, just like that
and one more, 3 1⁄4 inches.
I've got three lines, all 3 1⁄4 inches away
from the right edge of my zipper.
Okay, the next thing we're gonna do
is we're gonna actually sew along this line
to close up our little pockets.
So, what I'm gonna do is I'm gonna take my zipper
just like this and fold it in half
and just carefully lift up both pieces
so that they're laying together just like this.
So, I've got my lining piece here, this lining piece
and we're just laying them down with our zipper flat
and a lot of times what I'll do
is I'll go ahead and just throw a couple wonder clips
up here to keep that zipper.
You also just wanna make sure
that these two lining pieces are just nice and taut
and they should be lining up right down here on the edge
and as you can see, our line is right here
so when we sew along that, we should be catching
our little pocket pieces to close up our pocket.
So, once I'm sure everything's nice and aligned,
I'll go ahead and throw a wonder clip on there.
So, here's our wonder clips.
We're gonna go ahead and flip this over
so that we can see our line side
and then I'm gonna move my clips
so that I've got one on each side of my line.
So, here's my line.
I've got two up here and two down here.
That's gonna hold everything in place for me
so I can stitch right down this line
and I don't have to move my wonder clips around.
Okay, and now we can just sew right down this
using a straight stitch.
If you've increased your stitch length
for these top stitches,
make sure to go back down to about a 2.0, okay?
And I just sewed right off that edge.
All right, so our first one is done.
I can remove my clips.
I'm gonna reuse these clips.
We're gonna do the exact same thing for this one, okay?
Grab this lining and pull that one out of the way
so it's not getting sewn accidentally.
Again, we're gonna just take this zipper
and fold it in half and just kind of bring this up.
We're gonna stick our little wonder clips
on the top of our zipper.
That's just gonna hold that nice and straight
and I'm gonna lay everything else this way
so it's out of the way
so we're not gonna be stitching
over any of this other stuff, okay?
And again, you're gonna wanna make sure
your lining pieces, our two lining pieces here
are nice and lined up on both sides
and we're gonna just again place a wonder clip
on either side of our line.
Then we'll take this to the machine
and sew right down this edge
and just for these subsequent pockets,
just make sure that none of the rest of this stuff
is in the way.
You don't wanna be sewing over your first pocket.
Just these two outside panels and your two lining pieces.
Okay, so our second one is done
and we just have this last one.
So again, I'm gonna kind of get those out of the way.
We've got our lining pieces and our outside panels.
Again, we're just gonna grab this and fold it in half.
You don't have to put these on the zipper
but I just find that it just helps keep everything
kind of in order and then I'm gonna take this whole thing
and just get it out of my way.
Make sure these other two pockets that we have sewn
are out of the way.
Make sure your two lining pieces are nice and smooth
and then you can, again, place the wonder clips
on either side of your line and sew down this line.
And each time we sew down one of these lines,
we're creating another pocket.
Okay, that's our last one
and the hard part, I think, is over
and so now you should be having a panel
that looks like this.
You've got three little zipper pockets.
On the back side, it looks like this.
You've got, hopefully, have caught your lining pieces
in your stitch line so that your pockets are now closed
and when you turn them right side up,
you've got something looking like this
and if we open this up, you should have
a nice pocket in there.
Now the only other thing I'm gonna do really quickly
because I used a friction erasable pen
is I'm just gonna press these lines really quickly
to get rid of my drawn lines.
Now, we've got our three panels.
The other thing that we need to do now
is get rid of our excess zippers
and also, the pattern suggests running a little stitch line
just to close up this side of the pocket.
It kinda helps when you're adding
the side panels on the next step.
So in order to do that, we're just gonna do one at a time
and you're just gonna wanna get all the other pockets
out of the way so you're just dealing with this one pocket.
Since we've used longer zippers,
I'm going to place this about halfway open
and I'm gonna take this to my machine
and I'm gonna sew from my stitch line
up to my zipper, backstitch right here.
I'm gonna do that here as well.
Backstitch and then we'll cut off our excess when we're done
and I don't like to cut off this excess
until everything is stitched and ready to go.
The main thing is you just need to remember
to open your zipper panels about halfway or so
so that you don't accidentally cut off
your little zipper head here.
And to make sure that I don't go past my stitch line,
I actually start at my stitch line
and then go up towards my zipper
instead of the other direction.
And then I just flip this one out of the way
and then I'm gonna come up and just do this next one
and I do all one side and then I'll flip this over
and do all the other side.
Again, flip that out of the way,
grab my last one.
Okay, so I've sewed all of these,
now I just need to take it back and do this other side.
All right, and then now our last step here
is just to clean up these edges
and get rid of my excess zipper.
You're gonna do this even if your zippers
were the exact right length.
Again, make sure that I didn't cut off
any of my zipper tabs before I move on
and then I'm just gonna clean up this edge
and I'm just going by my fabric,
what I have here for fabric.
Okay, so there's that one.
Again, each time I do this,
I'm folding all the other panels out of the way
just to make sure I'm not trimming any of those accidentally.
Okay, and now we just need to do this side.
All right, so our zippers are good.
The last thing we need to do is trim off the bottom edges.
So we've got about three quarters of an inch here
and the pattern suggests we trim it off
down to about a quarter of an inch.
And so just be really careful,
you can do this with scissors
or you can do this with a rotary trimmer,
just make sure you're not accidentally
cutting through your pocket.
And this is in the lining,
so it doesn't have to be perfect.
We're just trying to get rid of some extra bulk.
Okay, last one.
That middle one's a little bit more difficult.
Just be careful whichever one you do.
Again, it doesn't have to be perfect,
it's inside your lining.
And that is it, the hard part is done.
We've got all of our little zipper pockets made
and now we're ready to add our side panels
to our zipper pockets.
Now the side panels come with a template in the pattern
and it shows you how to cut out the panel
and then it also tells you to create a press line
for your side panel.
So I've done that with both my side panels.
So basically what I did was I went ahead
and just folded it in half and just pressed right here.
And then using this little template,
I just made a mark and pressed here
and then same way here.
And so I've just done two of those
and like I said, you're gonna want this template.
It's in the pattern.
So now my side panels are ready to be attached
and I've done this a couple different ways.
I find it's easiest to do one pocket at a time.
So I'm gonna turn my pockets this way
and we're gonna just take this first crease right here
and our first pocket.
And I think for this one,
it's best to make sure your zipper is out of the way.
You don't want your zipper all the way down here on the end
we're gonna be sewing on.
So I'm going to place my panel right here
next to this stitch line and just fold my pocket open.
So you're just gonna wanna make sure your pocket
is right inside this crease,
just right up nice and tight in there.
And then the bottom raw edge is a little bit higher,
just slightly higher than your stitch line.
And then we're just gonna fold that in there
and sandwich that pocket in there.
And then I go ahead and put a couple
of these Wonder Clips there to hold it in place.
And then we're going to stitch from the top
all the way to the bottom.
And you're gonna stop,
just try not to go past this little stitch line
that you already have.
And I do backstitch here and here
just to give it a little extra strength.
When we're done sewing that one,
we're gonna come back,
we're gonna grab our second pocket
and put it in this second crease, just like this.
And I'll go ahead and put some clips on here right now.
I've seen people do these all at once.
I find once I get over to my machine,
this is a lot to manage
and it's easier to do them one at a time,
but you could do whatever works best.
And then the third pocket is gonna go
in this third crease like this.
And again, you're gonna sew that.
And so you're gonna take this to the machine
and sew all three of those.
But I'm gonna go ahead and unclip
the second and third ones for now.
I think it's a little bit easier
just to deal with one piece at a time
rather than have all these Wonder Clips bulking me up.
And I just think it's a little bit easier
to do it one at a time.
So we're gonna take it to our machine,
we're gonna sew down this edge,
making sure we get our pocket
and both pieces of our side panel in the same seam.
I'm gonna backstitch at my top and my bottom.
Once that's done, I will add my second one
and then my third one.
Okay, so our first one is done, perfect.
It's got our pocket nestled right inside there.
Now we're going to grab our second pocket
and we're gonna line that up with the center crease.
And so I just kind of fold it in by hand.
Again, you want to make sure that your stitch line
and your raw edges are kind of lined up
and that your pocket is right inside that little crease.
I'm gonna stick a couple Wonder Clips here.
We'll take this over to our machine
and again, sew all three of those layers together.
All right, so here's what it's looking like.
We've got the first two pockets sandwiched
and now we just have to sandwich our third pocket.
So again, we're just lining up that raw edge
with our previous stitch line right here
and then making sure that pocket is just right inside there.
Sandwich nicely, grab a couple clips,
take this to the machine and stitch.
Now for this one, I actually find it easier
to come from this direction because I can make sure
that I have these two pockets out of the way.
So this is kind of how I've been doing this third one.
Okay, so this is what it should be looking like.
You have these two little wings right here
but each of your zipper pockets are now sandwiched
in between these little side panels
and then you do have a little bit
of a give right there in the middle.
So now we have to do the same thing to this side
and I do it the exact same way.
I just start out with my first panel, line it up,
take it to my machine and sew
and then line up the second pocket with the middle line
and then the third pocket with your third line.
Now, since we've kind of already done this,
I'm just gonna do it over here at the machine
so I don't have to go back and forth
and again, press this one out of the way.
Okay, and then we can line up our third one
and again, I'm gonna flip this one over
and start from the center down here.
Okay, so here's what your panel should be looking like.
You've got your three pockets all sewn nicely
into our little side panels
so make sure everything is just caught in those seams
and we're good to go.
Next, we're gonna attach this to our outside panel.
So we're going to take our outside panel, here's mine
and we're going to place it right side down
and then we're gonna put our lining right side down
on top of that panel
and I think when she did this,
she gave you a little bit of extra room
because this has happened on all my bags
but my lining is just about a half an inch
or a little bit less in some cases,
larger than my outside panel
so I'm not gonna worry about that right now
but what we're gonna go ahead and do
is we're going to find the center of our outside panel
so I just fold it in half and stick a pin
and then stick a pin
and that's just the easiest way, no need to do math.
Okay, so that's my center of that
and then of course, our center of this one
is gonna be this center pocket
so I'm actually just lining up my center pin there
with my center pocket here.
So center pin, center pocket, center pin, center pocket
and then that's how I kinda know
that I have this thing centered on here
even if my lining is just a little bit off.
So I'm gonna go ahead just for right now
and just put a couple Wonder Clips
just to hold it in place, okay.
All right, so that's just holding my stuff in place for now
just to keep things centered.
Next, what we're gonna do is we're going to be sewing
this side panel to our lining piece
and to the outside of our bag
and so to get this to lay flat,
I usually will push my zippers away from the side
I'm gonna start on so they're just out of my way
and then I actually take my fingers
and just press them all to the left here
and that really helps flatten this out.
So as you can see, my pocket kinda did an S shape there.
That's just gonna help straighten everything out
and now I can grab this clip and clip that in place.
I'm gonna grab another clip, clip that center in place.
Gonna clip this one and you just want this panel
as flat as possible.
That's about the easiest way I've found to do it
and then we're going to go ahead
and clip all the way down to these edges
and you just wanna make sure that you're getting in
all of those layers.
Okay, so I've got my side panel,
my outer panel all clipped together.
We're gonna take this over to our machine
and sew down this edge using about a quarter of an inch.
I actually try and go a little bit under a quarter of an inch
because we're also gonna add binding to this
and I just want that stitch line out of the way
but you wanna just make sure you're getting through
all of these layers.
Now this is a lot of layers.
My Juki does pretty good with this
but if you have a sewing machine
that's gonna have trouble with this,
you might try switching out your needle to a denim needle
and that might help you get through some of this thick layer.
Now one thing I've found with this for sure
is to start just a little bit in from your tip
of your fabric.
I'm gonna take a few stitches,
I'm gonna back off and then come back in
and that will help from squishing
all of this fabric forward.
Now if you get stuck here,
it might help to just kind of lift up
your presser foot a little bit
and then continue on.
If you have one, you can use a stiletto
or like a seam ripper to kind of help push over those seams.
So whatever works to get this thick fabric through there,
just make sure you're getting all of the layers
and don't sew over your stiletto
or you'll break your needle.
Okay, here we have one side sewn down
and I do just make sure before I move on
that I got all of my layers in that stitch line.
I don't have any holes anywhere.
This is gonna be the time to fix that if you do.
I'm gonna flip it around.
I'm gonna do the exact same thing,
pushing my pockets to the side
and sometimes you can flip this pocket to the right too
if that helps.
Kind of whatever works the best.
Again, putting all my layers together here.
I can pull out my center pin.
By the way, the Wonder Clips have a flat side
and I do try and put that side down
if I know I'm going to be sewing this direction
because then they'll run flat on your machine
and they won't cause even more bulk for you.
So again, take this to our machine
and just sew right down this edge.
Okay, so here we are.
So now we do need to trim off this extra.
You can do it with scissors if you want.
I'm going to just do it with my rotary trimmer
and what I like to do is sort of fold the bag up.
Just make sure everything looks okay
and then I'm gonna take this,
kind of fold it up and place that down.
Okay, and then I have this side
and it might even be easier to do it this way.
Okay, now we're going to prepare our binding.
Now, the pattern does have your binding pieces in it.
You're gonna need four different pieces of binding.
You have two long strips, which we're gonna set aside
and then you have two shorter strips
that are gonna be for the sides of your bag.
So I have already taken my binding and just pre-prepared it.
So I do this at the beginning of a lot of my projects.
So you're just gonna be pressing your binding in half,
wrong sides together.
So you have a folded edge and a raw edge.
We're gonna press this flat again.
I'm going to center my binding on here
and I'm not really measuring.
You should have a little bit of a hangover on both ends.
So I've got my raw edge along the raw edges
and I've got my folded edge towards the middle of the bag.
And I'm just gonna go ahead again and Wonder Clip this on.
Again, trying to get all my layers in there.
But we're gonna take this to our machine
and sew using a quarter of an inch seam
all the way down this edge.
Again, it's gonna get really bulky here in the middle.
So if you need to use a stiletto or a denim needle
to get all of that fabric through your machine.
So this is what it should be looking like.
We're just gonna press that around to the other side
just like this and stitch it right down that side again.
So this is probably, I think, the trickiest part
because you just have so many layers
coming together for this binding.
Okay, so now we're gonna take this to the machine
and I'm just gonna sew right down this edge.
And I'm just gonna do my best
to hide the stitch line that was there before.
So we finished the binding on this side.
I've gone ahead and attached my binding strip
to the other side the same exact way.
We're gonna sew it down this edge,
flip it over, and then sew it back on.
I'm not gonna do that here on video
because I think you kind of got that binding part.
Just make sure both sides are the same.
Okay, so this is what our piece should be looking like.
We've got binding down both of our side edges
and it's all nice and secure.
And I do check everything before we move on
to the next step.
The next thing to do is to just trim off
any of your extra binding here.
It does hang over a little bit.
And I like to do that on my patterns as well
because it gives you a little bit of wiggle room.
You don't have to be quite as precise.
And this is bag making,
so things can shift a lot and get a little bit wonky.
So don't worry about it if it's not perfect.
Okay, the next thing we're gonna do
is we're going to prepare our long zipper.
So we're gonna be sewing that up these short sides,
but before we can do that,
we need to just prepare our zipper tabs.
So I've got my long zipper here.
We're gonna put that out of the way.
And then we're gonna make a little zipper tab
that's gonna fit right on the end of our zippers.
So you're gonna be cutting two pieces
to the size specified in your pattern.
So you're gonna take your piece.
You're gonna fold it right sides together
so that you've got your wrong side showing.
And then you're gonna flip one side back
towards that center crease.
Turn it over and flip one side back
towards that center crease.
And then you're gonna sew down these edges
using a quarter inch seam allowance.
Don't make it any larger or your zipper won't fit inside.
If you've used a wider zipper
than what's called for in the pattern,
this is a one inch wide zipper,
you're gonna need to adjust this
so that it's wide enough that your zipper can fit inside it
because what's gonna happen is our zipper
is gonna be going in this little slot that we're creating.
Okay, so I'm gonna sew this just down these short sides
and then we're gonna flip it right side out
and I'll show you how to finish it off.
Now, one thing that I have found is it's better,
this folded edge is gonna be your edge
that's kind of up towards your zipper.
So I like to start down here and then go up my side
and I do backstitch, go up my side.
When I get to the end, I'm gonna backstitch back down here
and then I'm gonna cut my thread.
That way I don't have threads up here on the top
and I've also backstitched so that's gonna help me
when I flip this right side out.
And I'm gonna go ahead now
and just clip off these little corners.
Don't clip into your stitch line obviously,
but that'll really help reduce that bulk.
So I'm just gonna clip off these corners.
Okay, and then the other thing that I will do to these
and this isn't in the pattern,
but I do like to do this as well
is just run just a little bit off there
so it's only about an eighth of an inch or so.
Just don't get into your stitch line.
That's the main thing there.
Okay, and now we're gonna go ahead and take this
and flip it right side out.
My favorite tool for that
is my Hera slash turning point turner
and I just put it down here at the crease
and then push this way.
Just be careful you don't poke a hole in your fabric
or you'll have to start over.
So just be gentle.
There we go.
And then you're just gonna pop out those corners
and I just run that right along that seam line
and then you can give this a little press.
You can do this with your iron too.
I've already turned my iron off
so I'm not gonna worry about it.
Okay, and then you're gonna make two
of those little pockets
and we're gonna just set those aside.
Next we're gonna work on attaching our big zipper
so the long zipper and the long binding pieces.
Now I've taken my zipper and I've just folded it in half
just like this, found the center
and then just marked it with pins.
That is gonna make it a little bit easier
when I'm trying to line all these things up.
I've done the same thing to my binding
so my bindings have a pin there in the center
and then I'm gonna do the same thing
with this side panel of my bag.
So I'm just taking it, I'm gonna fold it in half,
just line up those edges
and I'm just gonna stick a pin there as well
and I'm just poking it right into that foam.
Okay, and I'm gonna do that on this side as well.
Again, just fold it in half.
Okay, so now I've got all of my centers matched
and I'm ready to start.
So I'm going to take my bag, I'm gonna flip it this way
and I'll tell you why in a second.
I'm gonna take my zipper right side up
and the one thing that you wanna make sure of on this part
is if our zippers are going over here,
you know, when they're closed,
if they're all over towards the left,
we also want this big zipper to be going the same way.
So just make sure that your zipper pulls
are all on the same side of the bag
when you're doing this last step.
So we're gonna line up that center just like that.
I've got my little pins lined up.
I can now move this pin out of the way
and instead place a Wonder Clip.
I'm just gonna place it on both sides
just to kind of keep it in place
down the edge of my bag.
All right, so my zipper is right side up
and it's centered right on the short side of my bag
and again, the zipper heads are all on the same side.
Now we're gonna take one of our binding pieces
and I'm gonna lay that right on top of my zipper
with the raw edges along the raw edges of the bag.
The fold is this edge going in towards the bag
and I'm gonna line up again those pins.
So I've got my center pin and then I can go ahead
and just add that binding in to my little clippies here.
And now I can move that center pin as well
just so it's out of the way
and I can move my bag center pin as well.
And then I'm gonna go ahead
and just throw a couple more Wonder Clips
because our binding is gonna hopefully make it
all the way to the edge of our zipper.
Hopefully it's long enough.
So we're gonna go ahead and take this to the machine
and I'm using my zipper foot.
I'm gonna sew all the way down this edge
making sure to get all of these layers.
We've got the outside, the lining, the zipper
and our binding.
So that's a lot of layers.
You're just gonna wanna make sure
that you're sewing through all of that
using a 1 1⁄4 inch seam.
Now when I get down to where my zipper is,
I'm gonna go ahead and lift up my presser foot,
get it out of the way
and I can just zip my zipper out of the way
and if it doesn't slide out of the way like that,
most machines, if you press up a little bit farther
on your lever back here,
it'll actually lift your foot just slightly higher
and then you can get that zipper past your foot.
So just a little tip there.
We're gonna put our foot back down
and then now we can sew to the edge of our zipper.
All right, so this is what our project
should be looking like.
Now we can flip this binding over
just like we did when we attached the binding
to the sides of the bag
and we can just clip that in place.
We're actually gonna come back through
and we're gonna stitch the binding down
on the other side of our panel
and that will finish off this zipper,
making it extra cute.
Now I'm gonna flip it this way to my machine.
I'm gonna sew right down this edge
using about 1⁄8 of an inch seam allowance,
kinda like what we did on the outside edges
of our binding here.
All right, so here's what our zipper should be looking like.
We've got a finished binding
down the whole side of our long zipper, just like this.
And now we just have to add it to our other side.
So we're gonna do it the same way.
I've got my pin in here marking the center of my bag.
So we're gonna take this side
and the side with our pin in it
and that's the other reason I put the pin in it
because you're gonna put the pin side towards the pin.
And we're gonna go ahead and just flip our bag in half
and keep our zipper so that it's sort of right side out.
And we're just gonna line that up right here.
Okay, and we can put a pin in that center.
Actually, I'm gonna put a couple.
I'm gonna put one on each side of that center pin
now that I have it lined up.
And now what I'm gonna do is actually unzip this
because it's a lot easier to line up the rest of this zipper
if our zipper is not in the way,
if the other side of the bag isn't in the way, okay?
So now I can go ahead and keep pinning this down.
And I'm not gonna lie, this is possibly,
I think, the most challenging part
just because you're in the final steps
and things are getting tight.
So just do your best here.
You do wanna line up that center though
because if your zipper isn't centered
when you go to sew up your bag, it'll sew up crooked.
Okay, so here we are.
I've got that zipped down.
And then I go ahead and grab my binding.
And I've got that same pin on my binding.
So here's my center pin on my bag.
Here's my center pin on my binding.
And a lot of times I'll actually even leave
that center pin on the zipper in
just to make sure nothing gets shifted,
but I think we're good here.
And then I'm just gonna add my binding into my clip
that has all of my layers in it.
Couple clips in here, going down to the end of my zipper.
And again, I'm gonna do that in here too,
on this end as well.
We're gonna go all the way to the end.
Now, I like to leave my zipper unzipped.
That way I can sew as far down as possible
before I have to move it out of my way.
So, okay, and now we can take this to our machine.
And again, sew one quarter of an inch
all the way down this edge,
just making sure that you're getting
all of those layers in your seam.
All right, so here's where we are.
We've got our second binding almost all the way on.
We just need to flip it back around that back side,
just like before.
So here's what it should be looking like now.
We're gonna take this over to our machine,
and I like to sew from this side.
And we're just gonna sew using
an eighth of an inch seam allowance
to attach the other side of our binding to our bag.
Okay, so we're getting to the final stretch here.
We only have one more step to do,
and then we're gonna be done with this bag.
So our zipper is installed.
You can zip it up, and look how cute your bag is looking.
The next thing to do is to add our little zipper tabs
to the end, and then we're gonna stitch them to the back.
So this part is just super easy,
and we are so almost done with this bag.
So I'm gonna take this first bit.
We're going to just even up our end here,
so just chop off any extra of that binding.
We're gonna do the same thing with this zipper.
And then go ahead and just chop that off
so it's nice and straight.
And now we're gonna take our little zipper tabs,
and we're going to sew them onto the end.
So for this first end,
I'm gonna go ahead and just push that in there.
I'm going to place my zipper tab
so that this metal piece is just on the other side,
just sticking out from my tab.
And then also I'll be sure not to accidentally
sew over that and break a needle.
All right, so here is what our one side is looking like.
That's all finished.
I like to go ahead now and zip up my zipper
just to make sure that it's not twisted
in any way or anything.
And then I can add the tab to this other side.
So I'm just gonna kind of hold them together
and snug them in there just like that.
And then much like the other side,
there is a very small metal piece here
on the end of the zipper I don't want to sew over.
So I'm just gonna adjust my tab.
So it's just hidden.
I think it's kind of ugly, but I don't want to sew over it.
So I'm gonna throw a clip in there
just to hold it in place.
I'm gonna do the same thing I did on the other side.
So up one side, back and forth across to where the zipper is
and then back down the other side.
All right, friends, this is what our bag is looking like.
We are almost done with it.
We just need to add these little zipper pulls to the bottom.
And so I'm just gonna take it just like this,
flip my zipper so it's nice and flat.
I'm just gonna line it up with this center panel
just like that.
And we're just gonna sew it right along that edge.
Now to do that, I am gonna unzip my bag
and then I'm just gonna stitch right along that.
And I'm actually gonna try
and go right inside of my binding
so that I'm not going through
all of my binding layers as well.
But I'm just gonna stitch that right down to hold this on.
And I do go back and forth a couple of times
because this is kind of a handle
and it does have a little pressure on it.
Now the reason I do this at my machine
is because it's easiest if you get it underneath there first,
just make sure it's not twisted.
And then you can line it up on here like that,
get everything lined up and then we can stitch along this.
Okay, so now it's all sewn
and that's what it looks like on that side.
This is kind of what it looks like on the backside.
You can't even see it if you get in that stitch line.
And now we can just do the same thing.
Again, we're just gonna curl this under
and attach it right to the middle.
You just wanna make sure you don't have a twist
or anything in your zipper.
So just make sure it's going nice
and straight down to that center.
All right, everyone, here is our finished sew together bag.
Look how cute it is.
So that's gonna be it for today's tutorial.
If you have any questions about this bag,
make sure to leave them in the comments below.
So I hope you enjoyed today's video.
I hope it helped to take away some zipper fear from you
or maybe fear from putting this pattern together.
Please head over to the Sew Demented website.
Link is below this video to get this pattern
and show her some love
for making such an amazing bag pattern.
And thank you as well for letting me do a tutorial for it.
So thank you so much for joining me for today.
If you enjoyed this video,
make sure to thumbs up and subscribe.
I have a lot of fun content coming your way
and you don't wanna miss out.
You can also hit that notification bell
so you don't miss out on any upcoming fun.
Thanks so much for hanging out with me today.
I hope you enjoyed it and I will see you next time.
All right, and now we can clean up these edges
and did I get that all the way in?
Hang on, let me fix this one.
Putting one, oh my gosh.
That wasn't holding anything on, was it?
All right, everyone.
Whoa, that was my ironing board.
Hi everyone, thank you so much for joining.
Hi everyone, welcome back to my channel.
My name is Erica.
Thank you so much for joining me today
because we have a very special tutorial.
We are going to be sewing together,
sewing together the sew together bag.
All righty, yay.
Everything looks great, now what?