Drawing an Airplane with Pencil Step by Step for Beginners: Narrated

Pencil Art
23 followers
AI Generated·May contain errors
Hi, Tom here, in this week's Circle Line Art School video I'll show you one way to draw
an aeroplane, the first step is to draw the basic shapes using soft guidelines that we can erase
later on, start by drawing two ovals for each end of the plane, each oval shape needs to be
taller than it is wide, next draw a line from the base of the first oval to the base of the second
oval and then draw a line from the top of the first oval to the top of the second oval,
a slight curve on the side of the plane towards the right and then from the curve we can draw a
line from the base of the curve going to the right and then also going to the left and this will be
the baseline of the wing of the plane, next we can draw another line from the top of the slight
curve going to the right sloping down a little bit and then also going to left sloping down a
little bit and this is for the front edge of the wing, now draw a blunt point at the front of the
plane and a point at the back, then we can draw the tail fin at the far back of the plane on the
right, next draw two circles under the wing for the two engines and then we can extend these circles
into cylinders for the basic shape of the engines, one on the right and one on the left, the next
step is to go over the guidelines that we've been drawing to make them smoother, once you have the
basic shapes of the airplane smooth it's time to add some details to your drawing, you could add
the horizontal stabilizer at the back of the plane, we could start inside the cylinder of both of the
engines and then add a line of windows, just many small circles in a line following the line
of the main structure of the airplane, once you have the basic shapes smoothed out and a few
details, the next stage is we can start some shading, start with some shading in the engines
as these have some of the darkest shading on the plane, for my drawing I'm using a 4B pencil and
A4 paper, any pencil which has a dark tonal range would be fine for shading, most of the shading in
this drawing needs to be graded shading, graded shading gradually changes from dark to light
tonal values and we see graded shading most often on smoothed curved surfaces, of which the plane
has many, when adding graded shading to a drawing start with the darkest area first and have the
darkest area follow the shape of the area that you're drawing and then we can extend the shaded
area from dark to lighter tones, covering a wider area but slowly over time and to do this just use
less pressure on the pencil as you shade away from the darkest point of graded tonal values
to the lightest point, you're gradually reducing the pressure on the pencil and that should be
creating a lighter tonal value for your drawing and in that way you can create a smooth graded
shade for the smoothed curved surfaces of the airplane, the lightest parts of the airplane
are the tonal values of your paper, the areas which don't have any shading, so in my drawing
almost all of the surface of the airplane has some shading, there's very little which has no
shading at all, the last step in this drawing is to add a few small sharp details, if you'd like to
learn more about drawing techniques please visit my website www.circlelineartschool.com
where you can find full details of my online drawing course for beginners, How to Draw from
Scratch and you can find information on my books on drawing and on observation, thank you for
watching this drawing tutorial, I hope you found it useful for your own drawings, I post a new
drawing each week, please subscribe to my youtube channel Circle Line Art School to keep up to date
with all the content I create, thanks for watching and see you next time!
