Take a Tour of the Facility Testing Military Equipment to the Extreme

Military Gear Hub
2 followers
3 Video Views·Mar 26, 2026
The last thing military personnel should have to worry about is whether the equipment they use will protect them, keep them safe and be robust enough to do the job.
That's why BAE Systems, which supplies the British military with everything from combat aircraft and battle tanks to bullets and helmets, puts all equipment through rigourous testing procedures.
Forces News' Tom Sables was given a tour of the company's Faraday Test Centre in Kent where military kit faces strict and complex testing before it is given the all-clear to be used in the field.
AI Generated·May contain errors
Forces kit needs to be as rugged as the military itself.
Equipment must pass through rigorous tests and this is where it's done.
So this is the Faraday Test Centre.
We're at the BAE Systems Faraday Centre in Kent
to see the hardship that forces hardware has to endure.
Up first we're greeted by a helmet in a vibration test lab
to see if things come loose after a shake-up.
This is one of our two vibration test facilities
and basically we can bolt equipment onto the table up here
and vibrate up through this axis
or we can couple this down onto the slip table here
and vibrate in this direction too.
And what would be the signs this helmet here has failed
or is failing a vibration test?
So we would monitor lots of things.
We'd monitor its electronic performance.
So there would be cables coming out going to test equipment.
If something became loose or broke
then you might get a different frequency response.
Braking, hitting a landing, firing guns potentially on an aircraft
there's different vibration sequences and profiles
for all those different things.
The next room can mimic any extremes the components might be exposed to
from 140 degrees down to minus 60.
So this is the environmental test lab
where we perform things like temperature, altitude, vibration, acceleration, rain tests
pretty much all of the environments that the product will see
temperature, altitude and humidity all at the same time
which allows us to simulate the profile of an aircraft taking off
getting to altitude, going through the clouds, maybe some moisture
the temperature gets colder, the pressures change.
To simulate worst case scenarios
the engineers get creative with their own kind of Russian doll technique.
We have a small altitude chamber that we put a product inside
and we set that to maybe cockpit pressure maybe 8,000 feet
we put that inside a large altitude chamber
and set the outer chamber to 40,000 feet
then we pop the seal between the two chambers and we equalise.
So you're actually working out how it would handle an explosive disaster?
Exactly that, exactly that.
There's a centrifuge similar to the ones you see pilots train in
to withstand around 9 G's without passing out
this one hits an astonishing 30 G's
and in the corner a shock tower system designed to lift things up and throw them down
that's how you know a helicopter's hook can hold on to its cargo if it takes a knock.
This is where we would perform EMC testing, electromagnetic testing
basically we put our product on a bench
and we measure how much radiation our equipment gives off
to make sure it's below a certain level
and won't interact or interfere with another piece of equipment that's on an aircraft
we also split that the other way and we zap RF at our product
the room is screened to make sure that no interference can come in
from the outside world while we're doing the testing.
The lab even mimics the electrostatic charge
that can build up in humans before we touch things.
We're quite lucky that we get to test lots and lots of diverse products
head-up displays, helmets, active sticks, mission computers
and then on the flip of that we could have someone that comes
and wants to test a beverage maker or an oven or a microwave.
Once the kit passes through it can be tried out on flight simulators.
Can't get this wrong.
The cockpits aren't specific enough for pilots to train on them
they're blank canvases to give a range of different tools a try out.
Each individual piece of kit that I'm handling now
has been ideally tested through the systems we've been in before today.
Yes, absolutely.
They can handle everything that you know they will need to be able to
and now you're just testing they can do the job.
Absolutely right, yeah.
Do you trust me with the landing or is that out of my hands now?
At least we know some things can do their job.
Tom Sables, Forces News, Kent.
If you enjoyed this video don't forget to like and subscribe to our channel.
