Mini PC Builds for Windows 98 and XP

Tech Care
3 followers
2 Video Views·Mar 24, 2026
AI Generated·May contain errors
Nearly six years ago, I put together my tiny Pentium system. A jam-packed machine with a
200MHz Pentium MMX, 128MB of RAM, and a Voodoo 2. Over time, I augmented it with an Aureal Vortex
2, Green Blaster X2 MIDI card, and solid-state storage that have made it an absolutely fantastic
machine. After I built it, though, I moved my video work into a dedicated office space where
all of my computers went. Except for one. Having that machine at home, with it being so small and
feature-dense, has been a huge benefit. But it is still limited, and I got to thinking,
what if I built it some friends? And so began my months-long quest that resulted in me building
two more excellent machines that I'm going to cover the entire and sometimes custom builds for here.
You know, I sure do have a lot of games back there. It's weird how I never do anything with
them, isn't it? Well, that ends now. Because today, I'm announcing the launch of a brand-new
channel, Tech Tangent Gaming. I've released four new videos over there that cover not only PC games,
but console and ROM hacks. And videos recorded using the machines we're going to be building
today are already featured over there, with some more coming soon. I'm doing fully-scripted reviews
with my own insight and opinions on game design and a focus on covering full playthroughs,
so if that sounds interesting, I'll leave a link down below. Now, back to the builds.
In the video where I built the Tiny Pentium, I mentioned that it met the minimum specs for
many games I enjoy. Well, it didn't end up working out as well as I'd hoped in the long run. Between
it technically having two 3D GPUs messing with some games, and other games being overly optimistic
about their performance, it was easier to find its limits than I thought. And its limit is
basically DirectX. Anything that can natively use the Voodoo 2 in Glide works great, but if it has
to go through DirectX first, the performance falls off a cliff. So, it's ended up just being
relegated to what I would call a Windows 95 and DOS gaming system, covering the early 3D stuff,
but it's also able to scale back to older games as well. This left me wanting a machine that
could play those DirectX games again, though. And I really wanted something that was about the same
size as the Tiny Pentium. However, I didn't want to build a system from scratch. That wouldn't be
small enough for what I wanted. So, I started looking at small form-factor PCs. And I remember
Dell especially made a lot of systems like that. So, I started cataloging and cross-referencing
different models to settle what an ideal model for me would be. While stooping eBay and building the
list, I started talking to some friends about it and was pointed towards Shuttle as a potential
system maker also. They specialized in boutique higher-end systems that have become very
collectible now, and the cheapest ones were more than double what I was looking at paying for the
Dells. They were all also mostly later than I was thinking I wanted to aim for, too. But then I had
a realization. What I really wanted wasn't a replacement for the Tiny Pentium. It was miniaturized
versions of my Windows 98 and Windows XP 20th Anniversary builds. I needed to build two machines,
not one. Doing that would much better fit hardware to the games that I have. So, that reframed the
plan and made me immediately settle on what one of the machines I wanted was. This is a Dell Optiplex
GX110. But that's not the whole story. When Dell started making full custom mainstream machines,
they were trying to be smart about it and design them to come in different variants.
This started with the GX1 systems that came with a hideous tower version, a true desktop,
which actually featured in a cameo video that was actually a prototype for me making this channel.
But the GX1s were also available in a small form factor, too. And if I understand the manuals
correctly, all three machines use the exact same motherboard, and the difference is mostly down to
a daughterboard that adds ISA and PCI slots. The GX110 series was a fairly small revision that
bumped up the specs a little bit but kept the rest of the design. Now, the key difference between
the first generation machines like this and the later black ones is that the first ones can use
full-size add-in cards, unlike the later ones that can only use half height. So they are much
more flexible, but less powerful. There's also a bit of a gamble with them. The GX110 machines
come in slot 1 or slot 370. I'm not sure if there's a way to tell which it is from the outside.
They also came in many different configurations, and some may not have all of the options,
like onboard sound. This was all stuff that I researched before I bought this example,
and I was able to get one with everything I wanted, like onboard USB, LAN, and sound.
And sound is the most important, because all of these are limited to two PCI slots,
so if onboard sound is acceptable, that would give me a usable free slot. However,
the attentive among you may have noticed that I didn't say it has AGP, because it doesn't,
which really handicaps what you can put in here. I do have a plan for that, but I want to get back
to that in a moment, because while I was waiting on the delivery of this computer,
I was trying to come up with a different solution for a Windows XP computer.
My overall goal is to have three different machines with a small amount of compatibility
overlap between them to run the games on the hardware that they best match. But Windows XP
comes with a lot of changes to the operating system, and using NT, it makes a pretty clean
break. And since Windows Vista was so poorly received that hardware vendors even offered an XP
downgrade, the maximum hardware you can run on XP is a lot later than most other OSes.
And you know what the best kind of hardware is? Free. This is a Dell 7040 Small Form Factor
business computer, with an i5-6500 and half-height PCI slots. Now, this is an unusual hardware choice
for me, because this is far from period-accurate, and not the kind of thing I would normally pick.
However, free. I rescued this computer from e-waste and have been trying to find a use case
for it, so I thought I would at least give it a shot, because free, and if it did actually
work with Windows XP, it would be a whole lot more powerful than I would ever need.
Now, there is a whole renaissance side to Windows XP that I've never really investigated much,
because I generally prefer to run on period-correct hardware with drivers on some sort of plastic
media. But there are groups out there who tried to stretch Windows XP to run on hardware it was
very much not intended to. And my thought was, if I could get XP to run on this, it would be
practically unlimited performance. Long story short though, this hardware appears to be nearly
the exact limit where XP can no longer be installed. The problem is down to the peripheral
drivers. This has an Intel Q170 chipset, and if I remember right, after getting XP installed,
I had no USB, no LAN, no sound, and basically no way to get data onto or off of the computer
reasonably without opening it up and removing the boot drive. Windows 7 was the oldest officially
supported operating system for this machine. I even tried installing Vista on it for kicks and
ran into the exact same problems. Windows 7 is where I draw the line, because that is just
far too abstracted from what I'm trying to do here. But right as I was writing off the Dell
7040, a stroke of luck, and my local friend DZIAC managed to find not one, but two shuttle
PCs for basically free. And I ended up with all of the hardware from them and the more era-appropriate
case. Except they have some huge problems to solve, and I want to go back to the GX110 a while
while I mull over those. Now after the GX110 was delivered, I immediately tore into it to check it
over. I wasn't really planning on this being a video at this point, because in theory I should
just be able to add in a video card and be off to the races for gaming. But I should have realized
that that's never how these things go. So for now, I have mostly photos. The capacitors in this
computer look perfect, which was a relief. This precedes the cat plague, so I was optimistic it
would be fine, but it was good to confirm. The config of this particular machine also has the
offered CPU, thankfully a Socket 370 Pentium 3 at 733MHz. The amount of RAM it came with
didn't really matter, because I was ready to max it out at 512MB as soon as I opened it.
The machine also takes a full-size 3.5-inch hard drive, full-size 3.5-inch floppy drive,
and a slimline optical drive. And it has the two PCI slots I mentioned on the daughterboard.
It's overall nowhere near as cramped inside as the tiny Pentium, but that's also because it's just
much bigger. I knew going into this that it was going to be impossible to get the new machines
down to this size, because, well, it's a bad idea. These get a lot hotter. But still, it's pretty
darn compact. Thankfully, when I put power to it, it also booted up with no problems at all. Well,
posted without any problems. The hard drive had been removed before I got it, and I couldn't get
the slimline optical drive to work. I immediately suspected it was dead though, because I had the
same problem on the tiny Pentium. So I grabbed a full-size drive and was able to get it to boot.
I slapped in a quick hard drive, and it was doing great. For giggles, the test hard drive had Ubuntu
1204 on it, which totally worked. And this is where I introduce my genius plan. Before I even
bought the GX110, I'd actually already bought two brand new in-box GeForce 6200 PCI cards,
in anticipation that I wouldn't be able to find a system that could use AGP.
So now that the hardware was known to work, I was ready to open one up and make this machine
a monster. The card's box does warn about needing 300 watts, and the SFX power supply in this is
below that number. But that number is wrong, because it doesn't take external power, and you
can't pull that much through the PCI slot. So everything should be good. Except it wasn't.
And why was a complete mystery. Windows 98 does not truly support multiple GPUs,
and this computer has an onboard Intel video card. So it boots up to that by default. Using that,
I was able to install the NVIDIA drivers, and the 6200 worked. Except the Intel card was still
working, too. And Windows 98 would always default to using the Intel card. That's fine. It's
happening because the BIOS is setting the Intel card as the primary. So all I need to do is go
into the BIOS and set the 6200 to be primary, and it just hangs here. This is unsolvable.
But I do want to shout out the members of the Retro Dreams Discord server that helped me out
with ideas on debugging this, because I tried a lot. I disabled all of the other PCI devices,
I updated the BIOS, I swapped slots, I changed IRQs every possible way. Nothing would solve it.
The drivers were perfectly happy. It seems like there's just some kind of low-level
hardware incompatibility between that card and this machine. So I had to give up on that card.
And bought an FX-5200 to replace it. I really didn't need the box, but the eBay listing showed
the specs and let me see that this was a 128-bit card, so boxed example it was. I popped that card
in and it just worked. No weird setups, no other problems. The 6200 is just incompatible for some
reason. Now during this I had also replaced the slimline drive, but for some inexplicable reason
that was also incompatible, even though it's just an IDE drive. And that drive even worked
with an adapter on another system. Now I'll mention that I'm specifically going for DVD
drives. Not because I want to watch DVDs or think that there are Windows 98 DVD titles that I'm
made later than the CD drives, because so far the sample set is a 100% failure rate for slimline
CD drives for me. So I was hoping going for a later slimline DVD drive would last longer. And
also the DVD drives came in black, which just looks better with the weird gray accents this
thing has on the front. With all of the weird problems that I'm encountering with this thing,
I'm beginning to think that it's a little cursed. Well, actually maybe a lot cursed, because have
you noticed anything odd about the internals of this machine? There are no fans. The singular
exhaust fan in the whole machine is one next to the power supply that pushes through it and out
to a free vent on the other side. There is zero actual airflow in this machine, because that fan
can also just pull air in from the other side of the case next to the hard drives. Which might have
been fine without any cards and a light load, but I wanted a game and with a passively cooled high
power GPU. And this thing got hot. Absolutely unacceptably hot. I added a fan to the graphics
card, but it didn't matter because the air never leaves this thing and there's nowhere to add fans.
Well, maybe there's somewhere I could add a fan, but that is a whole other complicated thing. So
for now, let's check back in on the Shuttle, which also has cooling problems. So the Shuttle
was a disheveled heap and total mess of a computer. The power supply was dead. The optical drive was
stuck. The caps were leaking. And worst of all, the proprietary CPU cooler was missing. The Shuttle
XPC was a prominent line of small form factor computer chassis. They featured custom motherboards,
a custom case, provided full customer support and drivers, but they were not intended to be turnkey
systems though. They are a bare bone system meant to be more of a launch point for users to build
from. The particular machine I have here was even touted as being the most powerful small form
factor system on earth. This tight level of integration came with some trade-offs though,
and the cooler was a significant one. There is very little space between the removable drive
cage and the CPU. Shuttle's solution to this problem was to make a custom heat pipe cooler
that relocated the radiator to the back of the machine. This provided clearance for the drives
and more directly exhausted heat from the system. The one that should have been included with this
machine was so good, it was even offered as an upgrade for owners of older systems. But try as
I might, I could not find one. I have literally no idea what the former owner would have done with
two of these. So I was on my own for cooling, which was a big problem, but thankfully not an
unsolvable one. I started reading up on period correct coolers and reviews to see what my
options were, but in the meantime I needed a stopgap solution. And now we can go into more
detail on what this machine is. This is a Shuttle SB61G2, a Socket 478 Pentium 4 machine with AGP.
Except, uh, not anymore. The second motherboard came from a Shuttle SB75G2, which is nearly a
straight chipset upgrade and nothing more. You'd have to look pretty hard to even see a difference
between the two motherboards. But if you do look, you may see that the original board's caps are
bad, but the newer ones are not. So I'm just going to use that one. This chipset also allows
the machine to use newer processors. And interestingly, fitted in this board already
was a Pentium 4 3.2 gigahertz hyper-threaded CPU, except the actual one was an engineering sample.
A pretty awesome chip for this that I will definitely be leaving in it. Now I have plenty
of Socket 478 systems I can pilfer a cooler from for this chip, but the drive cage won't clear it.
So while testing, I was running it both driveless and with a, uh, very hacky method to mount the
drive. The next problem was that the original 200 watt power supply in the system was toast.
I could recap this, but I vastly prefer to replace power supplies from this era if I can. And
thankfully, this is actually a Flex ATX form factor power supply that you can get a modern
version of. So I ordered a 500 watt FS group model. I chose this exact one because it has
the most powerful 5 volt rail, even more than the 650 watt model. 5 volt power is a lot more
important for these systems. So that was my sole deciding factor. With that and a cooler,
I was now finally able to test if this machine would work. And thankfully, it does. Dodge a
bullet with those capacitors, but I did actually order a full cap set if it does ever go belly up.
Next up, the GPU, but I wasn't particularly keen on ordering a bunch more parts from eBay for this
thing after the GX110 problems. So I scounted around for parts and didn't find a whole lot for
high-end AGP cards, but I had set aside an ATI card based on the sole criteria of it being
red because I was thinking it might be fun to make an all red vintage AMD build sometime.
But it turns out that was a Radeon X800 Pro, which is an extremely good AGP card. So rip AMD
build because this thing has found a higher calling. With that, the XPC was now mostly usable
and I could start testing it. While that was going on, I finally had a plan to tackle cooling
on the GX110. So let's get back to that. The airflow in the GX110 is garbage and there
aren't many options to fix it. There's some random air holes above the CPU, almost usable
60mm-ish vent on the left, and then the right which is the only exhaust through the power supply.
But even that isn't good because there's a huge gap between the power supply and the
vent for the hot air to just blow back into the case instead of out of it. This is garbage,
genuinely. This is terrible and I don't think it moves any air through the important hardware
at all. So I decided to completely re-engineer how cooling works in this. I modeled the machine
loosely in Blender so that I could think this through, and I had a few ideas. One fundamental
part of my plan was to take a page from later Dell machines that would use a plastic shroud
for air ducting. So I was planning on adding something like that. Since there's only one
in the back, my idea was to surround the CPU and the vent and then put a fan on the shroud
that could blow over the GPU. This would act as an actual intake for the machine,
which it didn't have initially. Then I had two ideas how to handle the front. The simplest option
was to mostly leave the front the same, but block the front left air vent completely so air could
only be drawn from the back. Alternatively, I could flip the fan on the power supply to pull
cooler air in over it first, and then exhaust all of the air through the front left instead.
But there are two problems with that. One is competing intakes for the single exhaust,
which could lead to imbalanced airflow again. I wasn't crazy about that.
But there's one more problem with the second design from a practicality standpoint.
I couldn't put the case on its side anymore because it would block a vent no matter what.
So I settled on the first design. But before I went all in on it, I figured I should do some CFD
first to get a feel for how it would behave. That's right, a cardboard first draft. Actually,
I was pretty confident in my plan and had ordered everything I needed before I even started on this.
My plan was to use sheets of PET that I could cut, score, and bend to make the ducting.
Sure, I could have 3D printed this, but this was actually faster and bore temp stable.
I started with a paper cutout so that I could trim and shape it down as I went along.
Again, the idea is to completely cover the CPU and the rear vent,
so cool air must be pulled over it by the side-mounted fan.
After I made a rough paper template, I cut it out of cardboard,
mounted the fan, and folded it together. The shape needed a little tweaking, but I could get a sense
of how it would work now. I sealed the front left with packing tape and made a gasket around
the power supply exhaust so it couldn't just roll back into the case anymore.
As I went along, I found only one clearance problem that I had to really be concerned about.
The lid of the case has a spar on it to make it stronger to support a monitor on top.
My shroud ended up pushing right up against that, but it did fit.
Before I moved on to the final version, I tried to get a sense of how much air this
is moving by comparing the original setup by having it blow against a string, but
really wasn't conclusive. I think I would need the other kind of CFD to really know.
But it definitely wasn't worse, so I went ahead with the final PET version.
It was much more difficult to cut this than I expected, and
I wish I had a better tool for this, but I was able to make do.
And in the end, man, it turned out well. There is one mistake where I slipped while cutting
the circle, but other than that, I don't think I could be happier with it.
Now the real question though, did it help?
I decided to heat soak the system using Unreal Tournament 2004, which was my high-end performance
goal for this system. I ran it with a static seam in the new cooling while monitoring it
with my thermal camera until the external temperature of the case reached a stable
temperature and stopped rising. Now I'm going to state this directly, I am intentionally
recording these in Fahrenheit, because I don't want these values to be confused with the kinds
of readings you would get from in-die temp sensors, because I cannot measure the parts
like that on this machine. These readings are not directly comparable to those, so I'm trying
to make it distinct. Now from my readings, the case reached a temp of 93.5 Fahrenheit
after about 20 minutes before opening it. When I opened it, the GPU was 121 Fahrenheit,
and oddly the chipset was the next hottest thing at 133 degrees Fahrenheit. I then re-ran the exact
same test without the shroud and removed my front left seal. I left the power supply gasket
and the GPU fan though. I ended up aborting the test after only 10 minutes though, because it
exceeded the external case temperature of that first test in half the time, and I did not want
risk damaging any of the parts. The readings were 94.5 degrees Fahrenheit on the case, 136
Fahrenheit on the GPU, and 143 Fahrenheit on the chipset. Noticeably higher temperatures, but again
in less than half the time. But also, notice how much more heat the machine exhausted out with the
ducted version and how much more heat contrast there is in the original. The hot parts just
keep getting hotter. So I'm calling the cooler a complete success here, and with that, the GX110
is complete. Now let's see if we can have as positive a result with the shuttle. After looking
at socket 478 coolers, I narrowed my choices down to a handful of low-profile aftermarket coolers.
I was looking for something that was full copper for thermal conductivity and something with a
small mounting footprint. Because another problem is that the cooler can intrude into the area
around it, and there's not a lot of space in there. This is complicated by basically needing the
cooler to be brand new as well, to make sure that I get all of the mounting hardware. So it wasn't an
easy search. Eventually, I found the perfect one listed on eBay though. A Spire model that would
hopefully fit. But the other problem I needed to solve was the optical drive. I mentioned that the
came with was dead. Well, it might have worked, but the rubber part of the disc clamp melted into
the disc that was left in the drive and was ripped apart when I tried to remove the disc. The laser
may have also bit the dust based on the ring that you can see on the disc. And I really didn't like
this HP OEM drive that was used, but at least it was silver. There aren't a lot of options for
silver drives to match machines like this. So I ended up looking at contemporary reviews and builds
to see what drives people with these went for. In the end, the answer was the same drive that
I went for with my 20th anniversary XP build, a Sony DRU drive. That's what everyone back then
used because it at least had a little bit of silver, but it was also one of the best drive
models around. Now I managed to get a later, faster model that didn't have the blue accents to
match even better. And with that, I was ready to solve the shuttle. I pulled out all of the stuff
I had in there for testing and yes, I'll get back to that SSD. The first thing I want to get
installed is the cooler because even though it uses a very small copper core like I was after,
the fan is still fairly large. But the bigger problem though were the latches. Socket 478 has
a plastic frame that the cooler clips onto and the latches for the user to install it were overhanging
the PCI slot. Worse though, the latches also intruded into the space for the power supply.
I attempted applying a bit of pressure to bend them upright, but the metal was far more brittle
than I expected and one of the tabs that holds the latch to the tension bar snapped off. Thankfully,
it would still work with that damage, but this wasn't a problem I could ignore. It's impossible
to mount the power supply like this. So I verified that the cooler does clear the drive cage and did
the only sensible thing. I grabbed them off. I feel a little bad about this because I'm basically
destroying this thing when it was brand new, but there just aren't a lot of options that are
compatible with this system and I'm not going to be able to find that original cooler. Thankfully,
that worked though and I only did one side because I'm not currently planning on running any PCI
cards in this thing. This let me mount the power supply and the cooling was finally solved in a
way that didn't compromise the rest of the system. Now I'll mention I did toss a Noctua fan on the
back, but I might actually replace it with a higher CFM one later because the other fans in
this are super loud already and it gets a bit toastier than I would like. The Spire cooler
actually came with a potentiometer that you can mount in a slot in the back to control its speed,
but I'm not taking any chances and I'm just running it full tilt all the time.
Now that there's room with that cooler though, I can install the DVD drive. I ended up getting
another brand new one this time. Again, not intentionally. It was just that all of the
open-box examples on eBay had the drives that the owners replaced in them instead,
and all of the used examples were extremely yellowed or missing the silver faceplate,
so I knew it was. The optical drive and hard drive mount in a removable subframe that I can
then slot into the case from the back, and oh man, this was my first time seeing the machine
with a proper drive and the filler plate installed. It looks so much better now.
To finish it up, I just needed to route the audio cable from the motherboard to the drive
and connect it to IDE. Little fun fact, the Shuttle actually comes with a slightly special
IDE cable that is meant to tuck in along the rail and be managed through tabs and slots.
It works extremely well for such a tiny system. Also mentioned, sometime along the way I dropped
in more RAM than this will ever need. 2GB is a ton for a system like this, so it's not very hard
to max it out. Then the SSD goes back in, which is pretty special. This is a Samsung 850 Pro,
and this is one of the only SSDs that you can install actual trim support for in Windows XP.
That means that I don't have to worry about the drive slowly nuking itself while being run in
this computer because I can run the Samsung Magician software to run trim so that it can
sort itself out. I'm really glad that I had some of those that I could put in here because
that really makes this machine a whole lot easier and faster to use.
I will apologize that I'm just wedging the SSD between the top of the case and the drive,
but I'm leaving a 3.5 inch bay free for the potential of adding a drive emulator later.
And with that, the shuttle is now done as well. Oh yeah, I did have to tape back on a couple of
heatsinks that were knocked off, but that was no big deal. But with that, both systems are now
totally finished. And I do mean totally. Before, I found matching peripherals for the tiny Pentium,
but I'm not going to do that again here. The whole reason I'm going for such small machines
is so that I can fit them in tighter spots at home. And frankly, I'm just using them with
modern displays and peripherals through a RetroTINK 4K and a KVM, so it's really not
needed here. But I have been using these systems a bunch now, and they are...
Let's start with the GX110. Like I mentioned, my performance target with this machine was
Unreal Tournament 2004. I didn't actually want to play something that new on this,
but I wanted it to have that much headroom for games that run poorly,
especially with the GPU being choked through PCI. With more reasonable titles, it works great,
though. The Tiny Pentium was a weird mix of either being hard bottlenecked by the GPU or the CPU.
Something like Zoo Tycoon that seemed simple ran terribly because it was CPU-locked,
and something more intense like Draken also ran terribly, but because it was GPU-bound.
Both of those games run great on the GX110, though. Actually, Draken was THE game that
made me want to do these builds. I've been wanting to try it out for a long time now,
and I've finally been able to. It's one of the games that I have a full review of
and summarized playthrough on the New Gaming channel if you want to check it out.
Now, I was on the fence about adding an Aureal Vortex to the system with the free PCI slot,
and while that might have given it some more post-processing capabilities,
the onboard analog SoundMAX chip seems perfectly serviceable, so I'm going to continue with that
for now. I don't need more advanced MIDI or better DAW support because that's what the Tiny
Pentium is already great at, and being able to delegate uses to each machine like that
is exactly what I was after. Now, let's take a look at the shuttle in action, though.
I will admit, I wish this was slightly newer. An LJ775P4 with a PCI graphics card would have
been a lot better for just a little bit more performance headroom, especially price-wise.
I lucked out having the GPU I did because high-end AGP cards for a system like this
are desirable now, and I'm really not interested in spending $300-plus on a video card for this.
Thankfully, by sheer coincidence, this machine did meet my performance goal,
at least on paper, because I wanted to be able to run Crysis on this, and a P4,
3.2GHz, and ATI X800 Pro are the exact minimum system requirements. XP is technically a little
bit lower, but let's just say when the video about playing that game on this machine comes out,
you won't be thinking it was overpowered. For less crazy performance targets, though,
it is an absolute champ. I can totally see why the shuttles are so revered now,
even though this one is a bit of a Frankenstein now. I'm so happy with how these two machines
have turned out. They do everything I was hoping for and more. A fun little side note here. The
Tiny Pentium is 200MHz, the GX110 is practically 800MHz, and the shuttle is 3200MHz. By sheer
coincidence, each one of them is exactly four times higher clocked than the next, and while
I could possibly eke out a little more performance with some upgrades, I think they're perfect as
they are. But I am super excited to have these machines, and they will be getting a lot of use
going forward. Between the three of them, I should be able to run almost every single physical PC
game I own on real hardware that all fits together in a very compact space. Though,
I will probably use DOSBox with the Tiny Pentium for games that have speed issues,
but I still will be able to leverage its real MIDI hardware with that.
But that's it for now. I'm going to plug the new gaming channel one last time here, though,
and it is linked down below. But if you enjoyed this video, you may want to subscribe to be
notified when I release more of them. If you want to help support the channel,
you can find me on Patreon, but for now, that's it, and I will see you next time.
