Inside the PC9000 - Komatsu's Largest Mining Shovel Ever

Machinery Master
5 followers
The biggest hydraulic mining shovel Komatsu Mining has ever built, the PC9000!
We go behind the scenes to show you the history of the oilsands region, why mining shovels like this became popular, Komatsu and Demag's product line history in Alberta, how the machine was transported form Germany to Fort McMurray, assembling the giant shovel on site, and more!
Time Code:
00:00 - 01:50 Intro
01:50 - 03:30 History of Canadian Oilsands
03:30 - 05:35 Komatsu Hydraulic Mining Shovel History
05:35 - 11:35 Transporting the PC9000
11:35 - 13:35 Building the PC9000
13:35 - 16:20 Komatsu PC9000 Working
16:20 - 17:30 Advantages of a Hydraulic Mining Shovel
17:30 - 18:55 PC9000 Specifications
18:55 - 19:53 Outro
#machine #Equipment #HeavyMachinery
In this episode, we're going to show you Komatsu's largest shovel ever built, the PC-9000.
Today you're going to learn all about where the shovel was built, how it got from Germany
to Fort McMurray, a bit about the history of the Komatsu hydraulic mining shovel product
line in the Canadian oil sands.
So stay tuned and learn all about the Komatsu PC-9000, the largest shovel Komatsu has ever
built to date.
First off, a big thank you to everyone who's helped make this video possible.
We were very fortunate to be granted access to the footage that you're about to see.
We weren't able to be in Germany for when they shipped the machine.
We weren't able to be in Texas for when it arrived at the port in Galveston.
And we also weren't able to be on site when it was assembled.
So all the footage you're about to see is courtesy of Komatsu Mining Germany, SMS equipment.
We've also been able to gather some archival photos from various Facebook groups.
So big thank you to everyone who's contributed those photos.
To better understand why oil sands operations are investing in large hydraulic mining shovels
like this, we have to take a step back in history.
And that takes us back to the year of 1967, when the first large scale Canadian oil sands
operation came online.
That was the Great Canadian Oil Sands Project, more informally referred to as the Gone Crazy
Over Sand Project.
The GCOS would later become a flagship operation for a large Canadian oil company in 1979.
The operation in the early days ran large bucket wheel excavators, which were developed
in Germany's Ruhr Valley.
Those machines dug raw bitumen out of the ground and sent it to the processing plant.
They worked alongside drag lines, which removed overburden and also dug the bitumen.
The early years of GCOS were plagued with issues, extreme weather, operational issues
in the processing plant, and the mining equipment succumbing to the very abrasive nature of
the oil sands deposit.
It wasn't until the 1990s when an engineer by the name of D. Parkinson Marcoux, who helped
with the implementation of truck and shovel mining method, replacing the large bucket
wheel excavators and drag lines.
That move helped save the Great Canadian Oil Sands operation $5 to $6 per barrel of oil
produced, which at the time really changed the economics of the first large scale oil
sands mining operation.
From that moment in time, the truck and shovel mining method became standard practice on
all oil sands operations, given its success in lowering production costs at Great Canadian
Oil Sands project.
So how did the first PC9000 end up in the oil sands?
Well, to understand that, we have to go back in time to the year of 1986, when Komatsu
Mining introduced their first large hydraulic mining shovel to the region, the DMAG H485,
the largest hydraulic mining shovel prototype the world had ever seen, sporting a 23 cubic
meter bucket.
At the time, serial number 12001, 2 and 3 were all sent to the oil sands for testing
in both diesel and electric variants.
Shortly after, in 1994, haul trucks were growing in size and Komatsu's customers were asking
for a bigger shovel.
Enter the DMAG H685SP, a 585 ton prototype shovel with 33 cubic meter bucket, specifically
built for the oil sands.
This shovel still operates today with over 110,000 hours on the frame.
Listening to their customers' feedback, Komatsu again built the 635 ton DMAG H740OS, specifically
for the oil sands, with the OS being an abbreviation for oil sands.
It should be noted for detail's sake, as we've referenced the DMAG product, that in 1996,
a joint venture between Komatsu and DMAG called DMAG Komatsu GMBH was launched, and later
in 1999, Komatsu took 100% ownership of that joint venture, forming Komatsu Mining Germany.
So why do we talk about the history of the DMAG product and the early Komatsu product
in the oil sands?
Well, the learnings from all those shovels, the H485, the H685, the H740OS, all those
led up to the development of the Komatsu PC8000-6 in 2002, a 771 ton shovel with 42 cubic meter
bucket.
So why detail all the history of DMAG and Komatsu's early years in the oil sands?
Well, just like all the learnings from those early shovels, the H685, the H740OS, how those
applied to the development of the PC8000, we again find ourselves at the same point
in time with all the learnings from those shovels, including the PC8000, has now helped
Komatsu develop the PC9000.
So now you may be asking, where is the Komatsu PC9000 built?
Well, it's built at Komatsu Mining Germany's 27-acre factory based in Dusseldorf, Germany.
Here they build everything from the PC3000 up to and including the PC9000.
So this machine was built here, fully assembled and tested on site, and then disassembled
and shipped in multiple pieces by truck.
It left Komatsu's Dusseldorf factory in the dead of night in multiple pieces on multiple
truck and trailer loads, was transported through the town down to the banks of the Rhine River
where it was loaded onto a barge for transport.
Once it was loaded onto the barge, it was transported down the Rhine River to the North
Sea.
From there, it went through the English Channel, across the Atlantic Ocean, and up into the
Gulf of Mexico or Gulf of America, depending on how you refer to it as, and arrived at
a port in Galveston, Texas.
Once it arrived at the port in Galveston, Texas, it was offloaded and loaded onto Triton
Transport's truck and trailer setup.
Triton at the time was using a Faymanville 19-axle platform trailer, a one-of-a-kind
custom-built trailer with Kenworth W900 pulling up front.
Triton hauled all of the components of the first PC9000, with the heaviest being the
superstructure weighing 196,212 pounds.
Once it was loaded onto the Faymanville 19-axle platform trailer, the total weight was 337,000
pounds and measured 175 feet long, 17 feet wide, and 15 feet 8 inches high.
The PC9000 then made its way from the port in Galveston, Texas, up through America, crossing
states such as Oklahoma, Colorado, Wyoming, Montana, all the way up into Alberta, where
it was transported to Fort McMurray.
Once in Fort McMurray, it actually passed by the original Great Canadian Oil Sand site.
It again headed north, crossing over the Athabasca River on the Peter Lougheed Bridge, more informally
referred to as the Bridge to Nowhere.
After crossing the bridge, the PC9000 headed to an oil sands mine located 90 kilometers
north of Fort McMurray.
Once the machine arrived on site, SMS Equipment wasted no time getting the machine assembled
and tested.
From the time when the machine arrived on site, it took SMS Equipment approximately
six weeks to build the machine and get it into testing phase before final commissioning
for their customer.
As detailed earlier in the video, the Alberta oil sands have been the testing grounds for
many Komatsu products.
They actually received the first PC7000 back in the day for testing, and they also deployed
the first large-scale autonomous fleet on Komatsu 980E haul trucks back in 2018.
So why is the oil sands region investing in a large hydraulic mining shovel and not another
rope shovel?
That's because large hydraulic mining shovels like this can do what a rope shovel can, but
with greater flexibility.
The PC9000 is designed to load a Komatsu 980E haul truck, which is an ultra-class haul truck,
in five passes at a 90% bucket fill factor.
Now you may be asking, what is an ultra-class haul truck?
An ultra-class haul truck is a haul truck with a payload capacity of 300 ton or 270
metric ton.
What does that look like?
That's the Komatsu 930E and up, the Liebherr T274 and up, and the CAT 794 and up.
So those size of haul trucks or greater.
The PC9000 can also double side load, and that has numerous advantages.
One is it keeps a hydraulic mining shovel productive at the face, while one truck is
being loaded, the other can spot in on the other side.
This is incredibly advantageous, especially in autonomous applications, such as many of
the operations in the oil sands, where you can have autonomous trucks being loaded and
spotted at the same time, so that shovel really never stops working.
So what advantages does a hydraulic mining shovel have over a rope shovel?
While they're both productive at the active face, a hydraulic mining shovel can be more
selective in digging.
So if you need to take out a bit of waste on top, a higher grade or a lower grade patch,
or clean up the floor a bit, you can do that with a hydraulic mining shovel.
Whereas with a rope shovel, you kind of get one pass up through the face, and that's kind
of it.
While rope shovels are incredibly productive, they also require additional support equipment
to manage things such as the trailing cable out through the mine.
Hydraulic mining shovels also have incredible breakout force, so if you're in a really challenging
ore body where you need to really work that machine, hydraulic mining shovels offer that.
With a standing order for four PC9000 shovels and option for a fifth, with unit numbers
1501, 1502, 1503, and 1504, the oil sands region not only sees the potential in large
hydraulic mining shovel products like the PC9000, but more so the value in a collaboration
between SMS Equipment and Komatsu Mining Germany, a long standing history of products being
deployed in the oil sands region.
Given this first PC9000 is what's referred to as an inaugural machine or a prototype,
this machine will provide feedback for future PC9000 models built.
And when the PC9000 becomes commercially available in 2026, the learnings and provings of this
machine in the oil sands will lend to the later models produced out of the Dusseldorf
Germany factory.
As for the specs on the machine, such as weight, bucket size, breakout force, horsepower, we
don't know much at the moment, but I will say as details become available, they will
be available on PC9000.com, I will leave the link to that below, that is www.pc9000.com,
that is a website set up to release details as they become available.
Given that this is a prototype or an inaugural machine, Komatsu is working on testing the
product in the application.
So for instance, they might have a certain size bucket on it now, but after testing,
they realized it could handle a larger bucket or the bucket size has to be decreased based
on the application.
So that's why they haven't released any official details because this machine is still providing
feedback for future models once the PC9000 becomes commercially available in 2026.
So if you want to learn more about the PC9000, go to www.pc9000.com, I'll leave the link
below, you can go check that out and stay up to date on all the updates on this machine.
Again, big thank you to everyone who's helped make this video possible and supplied footage,
SMS equipment, and Komatsu Mining Germany and the various Facebook groups that contributed
some of the archival photos you saw of the DMAG product.
Thank you again, we hope to one day actually get up on site and see the shovel in action,
not only this shovel, but the other three.
So maybe we'll be able to produce a video like that one day, but for now, I hope you
enjoyed this step back through time into the Komatsu Hydraulic Mining Shovel product history
in the oil sands region, a bit about the new PC9000 and what it means for the mining industry.
