Here are your Time Stamps! Intro - 0:00 Materials - 5:05 Add Bag Tag - 8:03 Lining Pocket - 8:45 Add Snap - 13:22 Handles - 16:33 Attach Lining and Exterior - 19:32 Fold Boxed Bottom - 21:18 Finishing Touches - 32:03 Outro - 34:16
---------------------------------------------------------------------------------------------------------------- For extra content and goodies, check out the Patreon group! / oklaroots
Hey everyone, welcome to the Oakley Roots YouTube channel.
Today we're going to make something so fun, so quick, so easy,
and it is part of a pattern that has 15 different options.
Oh my gosh.
We're making one of those options today.
Today we are going to be making this adorable little basket,
and this comes to us from Spencer Ogg.
The pattern name is Perfectly Poppin' Pouches.
So let me just tell you, there are, I'm looking down at my pattern.
There are five different variations of this pattern,
and there are three sizes for every variation.
So that's a total of 15 patterns in one pattern.
I decided to go with the large basket option
because personally, I love stuff like this.
I'll show you.
I used a fun fabric here with a design on the front.
On the back is where I put my bag tag.
I will tell you that this whole exterior is one piece of fabric.
So be careful with directional prints.
As you can see, my little Legos back here are upside down.
That was OK for this.
But if you have like an all direction print, it will be upside down on the back.
And then in the inside, we just have a waterproof canvas lining.
There is one simple slip pocket here that you can add a snap to if you like.
This is a very quick, very simple project,
but you must pay attention to the instructions.
That's all I'm going to say.
The bottom of this is really unique.
How we box this bottom is a very unique process,
something I was not familiar with, and I used my seam ripper three times.
I sewed the bottom together four times because, again,
I did not pay close enough attention to the pattern.
So when you buy this pattern, you will also have access to a video
that Diane put together going over this.
I did utilize that video to help me with the bottom
because for some reason, my brain could not understand the words on the pattern.
So I'm going to walk you through it today.
Luckily, I've made so many mistakes.
I think I can guide you through it pretty easily.
But just in case I'm not resonating with you,
make sure you check out Diane's video as well.
It is a part of the patterns.
You will have to buy the pattern in order to access that video
that she provides for you.
But this is really, really cute.
This kind of reminded me of when my babies were really little
and I had little things like this kind of around the changing station.
So I'd feel like one with diapers
and other ones like creams and powders and all those things.
And like another one, you know, with like bath toys in the bathroom.
Like but now, you know, I don't have babies anymore.
They're not babies anymore.
Now this is more like toy storage, craft storage, snacks, just nice.
Like depending on the fabric you use,
you can make it as like a nice decor in your office.
As we go into the springtime Easter baskets,
you can make smaller versions of this, a whole bunch of them for Valentine's Day.
I mean, it's such a simple, cute, useful design.
If you are in need of a sojo boost, meaning you want to sew,
but it's just there's no fire lit inside of you to like
actually take the time to make something.
Make one of these.
Maybe not this one.
Maybe you make just the pouch without the handles.
Maybe you make the pouch with the zipper.
So many options here.
But give it a try because I feel like this will ignite that fire in you.
I really do.
I mean, after I got done with this, I was like,
I want to make so many more.
This is so stinking cute.
So I'm going to walk you through all the steps of this today.
I hope you love making as much as I do because it is adorable.
As always, thank you so much to Spencer Rogg
for allowing me to use your patterns on my channel.
Spencer Rogg has the most patterns.
I mean, really, Diane is so clever with how she puts these things together
because there's so many times in some of her patterns where I'm like,
is that going to work, though?
And as long as you follow her instructions that she gives you, it does.
And it's kind of magic.
It's kind of magic.
One of our favorite cross bodies that my mom actually uses as her everyday bag
when she travels down to the parks is a Spencer Rogg pattern.
And that was one of those where you put it all together and you're like,
there's no way there's no way.
And then you flip it out and it's like it's perfect.
How did that happen?
I still don't even know how I made it.
And I've made a few of those bags.
I'll have a link for that video right around here
because it is a good, good bag to make.
So if you're new to the Oakland's YouTube channel,
please consider clicking subscribe down below.
If at any point you like this video, please give it a like.
Any questions, comments, shout outs, leave them down in the comments section.
If you didn't already know, there is a little bell.
If you want to be notified when our videos go live, click that bell down below.
It's totally free.
We do plan to be doing other types of content on the channel.
So still lots of tutorials from sewing embroidery, things like that.
Probably doing some quilting.
But we are going to try to incorporate more live streams on the channel.
And if you want to be notified when we go live
because they're not always going to have a set day and time,
you're going to want to click that bell and you'll get a notification
either in your email or on your phone telling you.
Oakland's is live. Go check.
OK, guys, we're going to be making this exact same basket once again.
Like I said, there are 15 different patterns in here.
If you want to see a different variation at some point, let me know.
We can do another video for it.
But I wanted to keep it quick and simple today.
So let's get started.
So here's everything I'll be using today.
I have an exterior fabric, a lining fabric, and then it is like a little scrap.
This is Decoville heavy. It can be a scrap of anything.
It's purely for the cam snaps.
So if you don't want to use snaps today, you don't need any of this.
If you are using any quilt cotton,
you will want to interface it with a woven interfacing.
I did that on my first basket.
But since I'm using a water resistant canvas for both the exterior
and the lining, I'm not going to add any interfacing at all today.
I think this would be like a good like bathroom bag.
That's that was kind of the intention of this.
So the amount of material you're going to need is going to depend
on the size of the project you're going to be doing today.
I always suggest buying a yard of material.
That way you have enough to do other projects
and you don't run the risk of like running out.
You do need fairly large cuts if you're making a large version today.
So just think about that.
One yard of each the exterior and the lining, I would suggest.
And then again, if you're doing the cam snap, just little scraps,
little scraps of anything, interfacing, vinyl, something to beef up
the snaps a little bit so they don't rip our material.
All right. Here is all the other stuff.
I have my thread, which is a Tex 45 weight thread.
This goes through the needle only.
So this is the top of the machine thread for the bobbin.
I have a Gooderman polyester thread, just basic Gooderman from Joanne's.
The needle I like to use is a micro text 8012.
I use that for pretty much everything for these snaps.
I have a hole punch, a camp snap press and then plastic snaps.
These are optional.
You could just leave it a slip pocket.
So don't feel like you need to go buy all the stuff if you don't already have it.
This is a very beginner friendly, minimalist project.
So you don't need to buy a bunch of stuff for this.
One inch by six inch ruler as always.
A lighter is very handy when sewing to clean up any threads.
I have my stiletto to help when I sew.
I have a seam ripper, which I used a lot on the first version.
Once again, because I did not follow the instructions
and it was all with the very last step of like folding down the bottom.
So I'm going to walk you through that.
An air racing marker is always helpful for marking everything.
I have some clips going to be using a lot of those.
My bag tag, as always, and a good pair of fabric scissors.
You know what I just remembered?
I'm not making the large size of the basket today.
I'm making the medium size because I wanted to see how they differ.
So this is the medium size for the basket.
I have one cut of material that's for the exterior.
Remember, the exterior is going to start at one end.
It's going to wrap around to the other end.
So if you have a directional print, make sure you think about that.
For the lining, I have two cuts.
I have this top cut and then I have the main body cut.
This will be the top of the other side.
This will be the top of one side.
The reason we do that is because we're going to put this cute
little slip pocket in the middle here.
This will be back here. You won't really see it.
If you don't want to do that, you don't have to.
But I do suggest giving it a try.
This is also we're going to use the camp snap.
Once again, totally optional.
And the last two cuts I have are for the handles.
Also optional.
If you don't want to use handles, you just want to have a little basket.
Then you don't need to use the handles.
This, guys, this is such a minimalist pattern.
It's so fun.
I think I have this rotated wrong.
For anybody who is confused, like, why is that shorter than that?
I had it rotated around.
It goes like this for the lining.
So we are going to just dive right in.
The first thing I'm going to do is install my bag tag.
So what I want to do is find the midpoint along the top
short edge of my exterior.
And there are so many options in this pattern.
So you will have to make sure you read it and you jump around from page to page
depending on what it is you need to do.
So we're going to measure three inches down from this midpoint
and we're going to install our bag tag right here.
You might find it helpful to use some double sided tape here
with your bag tag just so it doesn't move around on you.
So now we're going to take this to the sewing machine
and just topstitch around all four edges at an eighth of an inch seam allowance.
All right.
So that's all we have to do to prep the exterior.
If there's anything else you want to add, go ahead and do that.
I'm going to put this to the side for now.
And now we're going to work on that lining pocket.
So you need to make sure you have your top lining, your bottom lining
and then your two little pockets here.
I suggest marking a midpoint along the top edge of the bottom
part of the lining bottom edge of this little slip here
and then also along the long edges of your lining pocket.
All right.
Once you have midpoints marked, let's grab the shorter
lining top panel and then also your lining pocket.
What we're going to do is find your midpoints, line them up
and then flip your pocket up so it's right sides together
with that top piece of the lining and match up those midpoints.
Grab your clips and clip in place.
All right.
Now let's go sew along this clipped edge at a three eighths inch seam allowance.
So I know I finger press things a lot, but today
I'll be utilizing my iron quite a bit.
So what we want to do is fold the pocket down so the seam is behind the pocket.
So you're going to press it really well.
Since I'm using this waterproof canvas, the iron is going to help it
stay very nice and pressed.
So I'm just going to grab my iron.
And the thing I like about waterproof canvas is when you iron it,
it'll get very loosey goosey because it's hot.
Then just grab your fingers and smooth it out while it's cooling.
And then it's super crisp
because we're not going to be topstitching everything.
And so the spots you're not going to be topstitching,
you want them to stay very crisp.
And with water resistant canvas like this, it will be smooth it out.
OK, so put that one to the side and now grab your main body
lining panel and lay it right side up and then grab your other
lining pocket panel and using the midpoint marks
that you marked, lay these right sides together just like that.
And then use your clips to clip them together.
And now let's sew along this clipped edge at a three eighths inch seam allowance.
Once you have that sewn, take your pocket and flip it up
so that the seam goes behind that little pocket
and then grab your iron and press that seam in place.
Like I said, just not when it's really hot, let it cool for just a moment.
It'll cool down quickly.
But while it cools, just kind of push it down with your fingers
and it's nice and crisp.
OK, so now you have your two panels like this.
What we're going to do is we're going to take them
and lay them right sides together and just match them up just like that.
Now I'm going to clip these together first and then we'll prepare everything.
So lining up these top corners and the full pocket.
OK, and now what I'm going to do is I'm going to fold down
both of the edges, the bottom edges of my little pocket here
by about three eighths of an inch.
And then I'm going to clip it down just like that.
Try to get it as even as you can.
This is going to be the hole that we leave as an opening,
and we're going to turn it out later.
And this just helps close that hole
by folding them both in the same direction.
You can fold them in their opposite directions if you'd like.
But this is easy.
So now we're going to start at one edge
and we're going to sew a three eighths inch seam allowance
until we get to our stitches over here.
And then we're going to go up towards the top where we folded
at a three eighths inch seam allowance and make sure you backstitch
at the beginning and the end.
We're going to leave this opening unsewn.
So starting over here, three eighths inch seam allowance down the side
until we get to our stitches and then three eighths inch seam allowance
all the way to the edge.
Again, backstitching really well.
Remember, we're going to be turning the whole thing out
through this hole right here.
So you want to have your backstitches there.
So once you have that sewn, let's just flip this over.
And all you have to do is just flip the pocket down just like that.
Now, I know you're tempted to topstitch this right here.
The pattern does give you suggestions on how to do that.
It's just you can't quite get all the way to the edge.
So I don't topstitch it again because the material I'm using,
I don't really need to.
I'm just going to press it.
So by just grabbing my iron and pressing this water resistant canvas,
I don't have to even press it for long.
Just heat it up and then I smooth it down with my fingers
and it's going to stay nice and crisp and I don't need to press it.
So one thing I will do though that it offers is to create a little rectangle
over on the side.
So I'm going to topstitch at an eighth of an inch seam allowance over here on the left
until I get to that seam where it connects and the pocket opens.
And then I'll go down about a quarter of an inch
and then I'll just continue stitching over to make a little quarter inch by,
let's see how big this is.
So this is like one and a quarter inches over here.
So it's a quarter of an inch by one and a quarter inch rectangle on the left.
And I'm going to do the same thing on the right
just to like provide a little bit more reinforcement here.
So as we're using this pocket, we don't end up ripping any stitches.
Okay, so now we're going to add a snap.
Once again, totally optional, but it is cute.
I'm going to start by figuring out where my snap goes on the exterior
and then I'll just use that to determine where the snap is going to go on the inside.
So what I'm going to do is pull open this pocket
and I'm going to bring the sides of the pocket together
because I'm going to find the midpoint.
So you can see I'm just pulling it like that so I can find where my midpoint is.
Grab an air racing marker and just mark at the very top of that fold.
There we go.
And then I'm going to grab a snap
because I don't want to place my snap too high and then it's hanging over the edge.
So think about this now.
I'm going to use just one of these circle snaps here.
Flip it over so I can see how low I want it to go.
All right, so I want to go right down here.
That's where I'm going to place it.
So I'm going to punch a hole through this lining panel
as well as the associated pocket lining panel.
So I'm putting my hand in the opening here.
I'll put my hole punch through there.
It's going to go through both those layers right where I marked.
I also have a scrap piece of Decoville Heavy here.
It can be a scrap piece of anything, even vinyl, fusible fleece, whatever you want.
Just something to beef it up because this is very thin.
We don't want that snap to eventually rip our fabric.
I'm going to install...
I believe this is the socket end or the male end.
So what we're going to do is we're going to open this up.
I'm going to slide my piece of stabilizer between these two lining cuts.
So between the pocket lining and between the exterior lining.
And I can grab my cap.
So my cap is going to go through the front of the bottom lining.
Flip it up and then I'm going to put my stabilizer over that prong
and then I'm going to insert the pocket, one panel of pocket lining.
So I have my cap here and then I have a little pokey bit sticking out over here.
And then I'm going to put the male in there.
And then I'll use my little hand press here to press it in place.
There we go.
So that side's done.
So now what I'm going to do is I'm just going to take this
and I'm going to push it down real hard.
And when I lift it up, I'll have an indentation on my material
and that tells me exactly where the center of this needs to go.
So using that little indentation, I can mark a dot with my air racing marker.
And then we're going to use our hole punch to punch a hole where that dot is.
There we go.
Don't forget to grab another piece of something to beef it up
and punch a hole through that as well.
Now I'm going to get another cap and then the female end of this
and this time the cap is going to go through the back side of the material.
No one's ever going to see that.
Make sure you add your stabilizer first
and then put it through the back part of the material
and then put the female part of your snap on there
and then just press it in place.
There we go.
Test it out.
Perfect.
Nice little snap pocket here.
Very cute.
And very quick.
Okay, so we're skipping a good chunk of the pattern for now
to prepare our handles for our basket.
So we're going to fold our handles wrong side up
and then fold them in half, wrong sides together, long sides together
and press either with your fingers or you can grab an iron.
And again, you don't need a lot of heat here.
Just get it warm, run it over there
and then press with your fingers as it cools and it'll stay very crisp.
There we go.
Now open that up and take the parallel long raw edges
and fold them up to meet that midpoint mark you just made.
So I'm going to finger press this first
because I don't like my iron touching the back of waterproof or water-resistant canvas.
There's usually just like a light layer of plastic back there
and I don't want it to melt onto my iron.
So I'm just going to press with my fingers for both the long edges
and then fold the whole unit in half like a hot dog bun
and then I'll press that with the iron.
Once again, just warming it up and then smoothing it out as it cools.
And now I have this very crisp little handle.
So I'm going to repeat that with my other handle.
So once you have both of your handles prepped and pressed and creased,
let's go take these to the sewing machine
and topstitch along both long folded edges at an eighth of an inch seam allowance.
Once you have those topstitched, grab your exterior main panel
and you're going to measure in from the left and the right sides
and it's going to depend on the size that you're making.
Mine is going to be two and a half inches in from the left
and two and a half inches in from the right
and I'm just going to mark a little tick mark right along the seam with my air erasing marker.
So you're going to take your strap and starting on the left side,
the left side of my strap is going to meet up with that tick mark
and we can just clip that in place
and you can sew the strap on one side at a time if you like.
I find that's a little bit easier but if you want to pre-clip it, you can.
So you're going to keep your strap flat and pull it up
and then the right side of the other part of your strap
is going to line up with that tick mark over here on the right side
and then use a couple clips to hold that in place
and now let's go baste this on at an eighth of an inch seam allowance.
Once you have one handle done, rotate your exterior panel
and measure in from the left and the right the same distance,
marking it on this top edge over here
and then grab your remaining strap and we're going to do the same thing.
The left side of the strap is going to match up with that left side tick mark
and we'll clip together and then we'll just gently keeping it straight,
lift up the strap and match up the right side with the right tip mark and clip together
and now we'll baste at an eighth of an inch seam allowance along both of these ends.
All right, so now take your exterior panel and lay it right side up
and then grab your lining panel and lay it right side down
and grab the edge that does not have the pocket on it, so pockets down here.
We're going to line up this bottom edge with the top edge over here of our exterior
and let's clip them together.
So once they're clipped together, let's sew across that edge at a three-eighths inch seam allowance.
So once you have that stitched, pull your lining back
so that the seam goes behind the lining panel.
So we're not pulling our exterior and lining wrong sides together yet.
We have our exterior down here, we have our lining up here.
Give it a good finger press.
If you want to use an iron, you can do that
and now we're going to top stitch along the lining panel
right along that seam at an eighth of an inch seam allowance.
We're not top stitching on the exterior.
We're just doing the lining panel and then the seam allowance behind it.
You guys, this is going to be so cute.
So now let's rotate this so we have the exterior edge
that doesn't have the lining attached to it laying right side up.
Pull up your lining.
This side has the pocket and we're going to just line it up right sides together
along that top edge and clip together.
So now let's sew along that clipped edge at a three-eighths inch seam allowance.
All right, once you have that sewn, we want to do the same thing.
We want to flip the lining over that seam
but it's hard to do now because we have this like tunnel here, right?
So I'm going to try to show you but you see how I'm just kind of finger pressing?
The seam is going behind the lining.
You see over here, this is the seam.
It's going behind the lining and I am going to top stitch this
but when you top stitch something like this, you kind of have to like carefully.
The front is going to be lifted up like this
and then you're going to lift up the back as you go.
I'll try to get a good shot of it at the machine
but we're going to top stitch on the lining at an eighth of an inch seam allowance.
Okay, now the part we've all been waiting for
and the real reason I wanted to do this video
is because I messed this up so many times and I was so upset
and you don't need to do that.
And again, if my stuff doesn't make sense, make sure you go check out Diane.
I would say go to Diane first because she does explain it best.
It's her pattern but we're going to do this.
So we're going to grab our pattern and we have it right sides together.
We're looking at the back and let's flip this over
and we want this pocket here to be on the back side
and we're going to look at this side like this.
Now what you're going to do is you're going to take your two seams,
the seam between the lining and the exterior
and on both sides you're going to take them and line them up.
So I'm going to line up those seams first and clip together on both sides.
Make sure you're lining them up at the right place
where the exterior and the lining meet up, not this further down seam over here.
And then clip together.
I like to use lots of clips here, okay?
So looking at the lining side here,
I'm just going to kind of push down with my fingers
and I am going to use clips but don't let the clips think anything is happening.
Nothing is happening.
We're not sewing this like this.
So I'm just going to clip a little bit just to hold it in place.
I'm going to do the same thing on the exterior side.
I'm just trying to flatten it out a bit so I can take a better look.
Okay, this step is optional but it can be a little helpful.
We're going to just tack down right here next to our seam.
So below the stitching, you can see right here on the back of your exterior,
below that stitching, just for like an inch on the exterior side, not the lining side,
only the exterior side, just like a little inch right here,
just tack it down at an eighth of an inch seam allowance.
That's just going to hold it together so it doesn't start slipping around on you.
Okay, so we have that little tack down there.
Now again, pocket is on the back side, not on the front side.
Pocket is underneath.
First thing we're going to do is we're going to make marks.
We're going to make a mark down here at this bottom crease.
So that's why I clipped it to get it as flat as possible
so I can figure out exactly where the midpoint is on this exterior.
I'm going to take scissors and just make a teeny tiny little cut right on the edge.
I mean just the teeniest cut.
You don't, you think it needs to be bigger.
It doesn't.
It's perfect.
There we go.
So I did that for the exterior.
Now I'm going to rotate and again flatten out my lining.
I'm going to do the same thing on the lining side.
Teeny tiny little cut on the corner.
Where the fold is.
Okay, so now you're going to choose how wide you want this bottom.
The pattern gives you many suggestions.
For the medium size, I'm going to choose a wider bottom
which means it's going to be a shorter basket.
But that's what I want.
So I'm going to measure up the measurement it gives me.
So for mine, it says two and a half inches.
So I'm going to measure up from this bottom edge here on the side
two and a half inches and I'm going to make a mark.
And remember, I am working on the side where there's no pocket.
The pocket is behind.
It's on the bottom.
Always keep the pocket on the bottom.
So I measured two and a half inches up here.
I'm going to do the same thing on the left side.
So now if you'd like, you can also grab your scissors and just snip
just like right into that mark.
Just a teeny tiny bit.
No more than an eighth of an inch.
And this is one spot where I continuously made a mistake over and over again.
Even though the pattern says specifically not to do this.
I kept taking this bottom edge and folding it up to meet that mark.
Don't do that.
That's wrong.
Don't fold up the bottom edge to meet the mark.
You're going to fold up this bottom edge just like this at the mark.
That mark up here is your fold mark.
So you're going to fold this all the way up and you're going to fold it at that mark.
Line it up with the sides and clip in place.
So however much you measured from the bottom to this mark over here,
that should be what this measures right here.
That fold should be the same amount.
I'm going to do the same thing on the left side.
I'm finding my little mark, my little cut, and I'm folding at that mark.
There we go.
Just press it in place like that.
Always checking.
Pocket is on the back.
There we go.
Okay, so that's number one.
Now let's rotate this and let's deal with the lining side.
Lining is a little bit different.
We're going to measure up the same amount that you did down here.
So for me, two and a half inches.
I'm going to measure up on both sides.
Two and a half inches and make a mark.
Once again, I'm going to use scissors and just clip about an eighth of an inch right where I marked.
Just makes it a little bit easier to see when you're working on this.
So now let's unclip the sides and work on the lining panel.
Lining is a little bit different.
Now what we're going to do is we have this bottom fold here, right?
We're going to open this up and push in that fold and then we're going to fold at our marks.
So again, I was making the mistake of having this bottom mark come up to meet those marks on the side.
No, no, no.
Don't do that.
You're going to fold on those marks.
It might be easiest just to take the top part of the lining we're looking at and just fold it like this.
There we go.
And then you can take the bottom part and fold it.
I'll show you from the side and then you see you fold the whole thing in half.
So that bottom fold that we were working with over here is now tucked in and it's like reversed.
And now we have two bottom folds which are right where we made our snips
and we have the very bottom of the lining tucked in like a little triangle right here.
You see that?
Okay, now clip it all together.
There we go.
Okay, I'm going to rotate and do the same thing on the other side.
So you see I'm just kind of like use my fingers and tuck it in.
Make sure I'm folding where my clip or mark is on both of these and then I bring them together.
And then the bottom fold just tucks right in here nice and high.
And it's nice and high for me because I'm doing the big base.
There we go.
And then I'm going to press this.
Okay, now before we move on, I'm going to give all this a good press with the iron.
Okay, so this is where we are.
Again, the pocket is underneath.
We don't want to accidentally get that tucked in because now what we're going to do,
I'm going to remove some of these clips to help stay out of the way.
We're going to take, this is the edge of our exterior,
and we're going to fold it down so that this edge right here, make sure it's nice and crisp.
Maybe we'll put some clips on this folded edge of our exterior so we know where to do it.
We're going to fold this all down to meet these two crisp edges on our lining.
So move that pocket out of the way if you need to.
Let's line everything up and I'm going to clip it all together.
You know, we have a lot going on here, but I want to clip those bottom folded edges together.
We're not sewing anything yet, so don't start sewing along any of these edges.
So this just gets us set up, okay?
So now the other bit that can be a little tricky, I'm going to clip along the sides.
Remove these clips.
What you're going to do is you're going to open up that exterior
and then open up these two openings on the lining and tuck in the folded edge,
the bottom folded edge into the lining.
So you should have the bottom folded edge going all the way into the lining
and then the fold that you just lined up with the bottoms,
it's just going to wrap around one of the lining folds.
So I have my exterior wrapping around one of my lining folds
and then my other lining fold over here on the side.
And I'm just going to clip just right where that is.
Okay, so I'm just going to go to the other side now.
Once again, you can kind of, I know it's a mess,
but we're tucking the exterior into the lining just like that.
Just again, make sure the sides are all lined up
because if it's not lined up and you sew this
and it doesn't all get caught in the stitches, it's going to be a problem.
Okay, so the bottom is done.
Now on the sides, just continue pinching all the way to the top.
Don't worry, this seam right here where it's like the top of the pouch
is not supposed to be all the way on the top here.
That kind of threw me too because I thought
maybe the seam was supposed to be up here.
It's not. The seams could be further down, further up.
Just flatten this out, making sure the bottom fold is all correct.
And then flatten out the sides.
All right, so this should be what you have.
It's like a little empanada.
It's a little chunky monkey. I like it.
So this is one side. This is the other side.
You should be able to see your pocket.
If you have this and you're like,
my pocket is like tucked inside the bag,
that's not good because you're not gonna be able to turn it out.
So now we're going to sew along the sides that are clipped here
at a 3 1⁄8 inch seam allowance.
Make sure you backstitch really well at the beginning and the end.
There we go.
Depending on your material,
this could have been a little challenging, a little thick.
I highly suggest water-resistant canvas for the exterior and the lining
if you're worried about thickness.
So now I'm just cutting off the corners to reduce the bulk
so it will poke out nicely.
Now we're going to open up the snap
and pull the bag through that hole in the lining.
It should be pretty easy to do.
So now before you basket it up,
you're gonna want to pull down on the side seams to get those straight.
You can see you can kind of open them up a little bit,
get them nice and straight and flat.
And I like to just kind of pull on the bottom
because you'll see the bottom will fold in on itself,
which is supposed to do.
So that way, if you want to store these baskets,
you can store them nice and flat and then you can open them up.
But I want to do that
because the top of our basket is not the seam
where the lining and the exterior connect.
As you can see, the top of the basket is just a fold of the exterior
and then down here is that seam.
So that's what I'm trying to do now
is just flatten out the top of my basket
so I know where that is.
Okay, so now you see we can open up the bottom
by just kind of tucking our hands in there and pushing out the sides.
And then you see you have this adorable little basket.
And then here's the little bottom of it.
Cute little basket.
Okay, so I am going to topstitch around the top first.
So once again, I like to just kind of flatten out the bottom
just to really get a good look at this.
I'm gonna grab some clips
and I like to topstitch around the top of this to get it very crisp.
And when I topstitch it, I think I am...
So I can topstitch the handles to it or I can leave them on there.
I think I'll leave them on their own this time.
So I'm just going around the top of this.
You could also use an iron to flatten it out if you'd like.
So I'm gonna use clips and I'm just going around the top
because once again, the exterior folds
and that becomes the top of the basket.
It's not where the seam is.
So I'm just gonna press it with my fingers
and use clips so it doesn't slide around on me.
And now I'm gonna go to the sewing machine
and I'm going to topstitch along the top edge here where the clips are
just to get a nice crisp finish.
I'm gonna topstitch at an eighth of an inch seam allowance.
All right, that's looking great.
And if you have like little tiny threads
where you started and stopped your topstitching,
you can just grab a lighter and very gently melt them
and they just kind of suck in and look nice and new.
So the last step is to close up the hole in the lining.
So pull that lining pocket out just like this
and then I just kind of push my fingers into the seams on the corners here
and then fold down those raw edges.
I don't measure them or anything,
so I just fold them down so that they're folded in enough
so that when I topstitch this,
I don't have to worry about any of the raw edges peeking through.
All right, and now I'm going to topstitch along this clipped edge
at an eighth of an inch seam allowance.
So once you have that done,
just push in that lining pocket and try to poke the corners down
so it's not all smooshy.
There we go.
Flatten it out.
There is our little basket when it's all flat
and then we can open it up.
How stinking cute is that?
This is such a cute little basket.
You guys, this is adorable.
So here's the thing.
This is the medium.
I have to make the small now because this is the medium.
This is the large.
So you can see this one I used quilt cotton and woven interfacing on it
and then waterproof canvas for the lining
and it is more kind of baggy drapey.
This one is just water resistant canvas and it is much more structured.
I would say you could probably get away with cork or a vinyl for the exterior
if your machine can handle those seams.
I think you'd be okay with that.
This is just so stinking cute.
But look, this is the large.
This is the medium.
What is the small gonna be like?
The small basket must be tiny.
I want to see that.
But this is so cute.
I would say the medium is a perfect size for your sewing room.
You could put all your thread in here, your spools of thread.
You could put a lot of your tools, your snacks.
You know how I like my snacks.
I just can't get over this pattern.
It's so stinking cute.
Okay, I hope you guys love making this.
If you make it and you share it on social media, please tag me.
I want to see your version and let me know what material you're using.
I would really love to see this in a vinyl or a cork.
If I have time, I will definitely give it a try.
And then, yeah, and then we have to do all the other ones
because they have other ones and instead of handles, there's a zipper.
Yeah, we're gonna have to do more from this pattern.
If there's one you want to see, leave a comment down below
and I'll try to do another one because these do sew up nice and quick.
So they're fun, quick, ignite your sew-joe projects.
You know what I mean?
So I hope you're having a great day.
Have a fantastic rest of your week.
Thank you for watching.
Get out there and make something, guys.
Bye.