I Found ONE Candle That Predicts the Next Move Before It Happens

Future Funded
9 followers
DISCLAIMER: I am not a financial adviser nor a CPA. These videos are for educational and entertainment purposes only. Investing of any kind involves risk. While it is possible to minimize risk, your investments are solely your responsibility. It is imperative that you conduct your own research. I am merely sharing my opinion with no guarantee of gains or losses on investments.
#finance #personalfinance #financetips #proptrading #propfirms #trading #rankings #crypto #bestpropfirms #futures #futurestrading #funded
99% of traders study 20 indicators and still lose.
I use one candle.
And it's not even a secret.
Market makers leave it on every single chart.
Here's the thing.
Most retail traders are out here drawing trend lines,
stacking RSI on MACD, waiting for confirmation.
And market makers are laughing.
Because while you're waiting for five signals to line up,
smart money already placed their order.
One candle ago.
In this video, I'm going to show you the exact candle I look for.
What it tells you about where institutional money is positioned.
How to spot it in real time.
And how to enter before the move happens, not after.
And before you skip ahead, the entry setup is not what you think.
Most people see this candle and still get it wrong.
Stick around, because I'm showing you the mistake at the end.
I've come to understand over the years that profitability in trading
often comes from keeping things straightforward.
When traders start adding too many indicators, concepts, and tools at the same time,
the process becomes unnecessarily complicated and difficult to manage.
Trading is supposed to give you flexibility and control over your time.
But if you find yourself staring at charts all day long,
constantly analyzing every movement,
then it starts to resemble a traditional 9-to-5 routine,
rather than providing the freedom many traders are looking for.
In this approach, the entire concept revolves around focusing on just a single candle.
That one candle provides the key reference point for the whole strategy.
Instead of monitoring dozens of different signals,
everything is built around this one piece of information.
Once that candle is identified,
all trade executions are taken on the one-minute time frame.
The overall method is actually very straightforward
once you understand the basic steps involved.
The first step is to switch your chart to the one-hour time frame.
After doing that, it's important to ensure that your chart is using the New York time zone.
This detail matters because the timing of the candle we are focusing on
is tied directly to the New York session.
Once the time zone is set correctly,
the rest of the process becomes much easier to follow.
Next, identify the high and the low of the specific candle you will be using.
In this case, the candle of interest is the one that forms at 8 a.m. New York time.
That candle becomes the main reference point for the strategy.
The only information you need from it is the highest price it reached
and the lowest price it formed during that hour.
After identifying that candle,
the next task is simply to mark its high and low levels on the chart.
These two levels create a defined range that will be used throughout the setup.
Once the range is established,
the next step is to patiently wait and observe how price interacts with these levels.
Specifically, you are watching to see if price moves above the high
or below the low of that 8 a.m. candle.
For example, imagine that price moves upward and breaks above the high of the 8 a.m. candle.
When this happens, the next step is to move down to the one-minute time frame
to look for a potential setup.
However, it is important to only consider entries after the official New York market open,
which occurs at 9.30 a.m.
Any trade execution should take place after this time.
Once the high has been taken and liquidity has been captured,
you shift to the one-minute chart and begin looking for a shift in market structure.
This structural shift is one of the confirmation signals required for the setup.
However, the market structure shift alone is not enough.
In addition to that change in structure,
price also needs to close back inside the previously defined range.
Remember that the top of the range is the 8 a.m. high,
and the bottom of the range is the 8 a.m. low.
After the structure shifts, the market must move back below the high
and close within that range before the setup is considered valid.
Once all of these conditions are in place,
the entry can be taken from a relevant PD array.
This could include areas such as a breaker block, an order block, or a fair value gap.
When entering the trade,
a common approach is to secure partial profits at a 1-2 risk-to-reward level.
At that point, roughly 40-50% of the position can be closed,
and the stop-loss can be moved to the break-even point
to remove the remaining risk from the trade.
After moving the stop-loss to break-even,
the final target for the remaining position becomes the opposite side of the 8 a.m. range,
which in this case would be the 8 a.m. low.
When this setup unfolds correctly,
price often continues moving downward and eventually takes that level.
If we flip the scenario and consider the opposite case,
where the 8 a.m. low is taken instead,
the same logic applies in reverse.
One important detail to keep in mind is the timing around the 9.30 market open.
If liquidity is taken before 9.30 and a structure shift forms early,
the market frequently performs another sweep of liquidity right at the open
before producing the valid structure shift needed for the trade.
Because of this behavior,
entering before 9.30 can sometimes lead to false signals or premature entries.
Occasionally, you may see a market structure shift occur before 9.30,
and sometimes that move will still work out.
However, it is generally safer to wait until after the market officially opens.
The preferred approach is to remain patient.
First, wait for a market structure shift,
then wait for price to move back inside the range after the liquidity sweep has taken place.
Once those conditions are met, the entry can be taken from a PD array.
From there, partial profits can be secured at a 1-2 risk-to-reward level,
after which the stop-loss is moved to break-even.
The remaining portion of the position then targets the opposite side of the range,
which in this case would be the 8AM high.
The overall process is quite straightforward.
Additional elements such as daily bias, higher timeframe PD arrays,
or even the broader higher timeframe trend are not required for this setup.
The entire method revolves around using the same 8AM candle each day as the key reference point.
That single candle provides all the levels needed for the setup.
This strategy is specifically applied to the NQ market.
It is designed around the behavior and volatility characteristics of that instrument,
so it is important to focus on trading NQ
rather than trying to apply the same method to other markets.
Now that the overall concept of the strategy has been explained,
it helps to go through a few examples to see how the setup unfolds in real market conditions.
In the first example, we begin by identifying the 8AM candle.
The only thing that needs to be done initially is to mark the high
and the low of that candle on the chart.
These two levels form the range that will guide the rest of the setup.
Once those levels are marked, the next step is simply to wait for price to interact with them.
If you switch to the 1-minute timeframe at this stage,
you may notice that price has not yet taken either side of the range.
In that situation, nothing needs to be done other than waiting
until price eventually sweeps either the high or the low.
After that sweep occurs,
the focus shifts to identifying a market structure shift on the 1-minute chart.
This confirmation should appear after 9.30AM, once the New York session has opened.
Looking at the chart, we can see that a market structure shift forms shortly afterward.
Once that shift is present, an entry can be considered from a relevant PD array.
In this case, the entry can be taken from a breaker block area.
This entry setup also aligns with a fair value gap,
which strengthens the location of the trade.
The stop loss is placed below the structure,
particularly because there are no unfilled fair value gaps below that level.
With no imbalance left beneath the entry area,
there is little structural reason for price to move further downward
before continuing in the expected direction.
From there, the initial target is set at a minimum of a 1 to 2 risk to reward ratio.
Once price reaches that level, partial profits can be secured
and the stop loss can be moved to break even to remove any remaining risk.
After reaching the partial profit level,
the stop is moved to break even while the rest of the trade is allowed to continue running.
Eventually, price moves further and reaches the full target level as the setup completes.
Moving on to another example,
the same process begins again with identifying the 8AM candle
and marking both its high and low on the chart.
These levels once again establish the range that will guide the trade setup.
After that, the chart is switched to the 1 minute time frame
to monitor how price behaves around those levels.
The objective remains the same,
wait for price to sweep either the high or the low of the range.
As the chart progresses, the market opens and price begins to push upward.
After that move, a market structure shift appears,
providing the confirmation needed for a potential entry.
Continuing to observe the chart, there is an interesting detail in this example.
The market structure shift occurs,
and there is a fair value gap present that price respects.
Because of this, price does not return to provide a deeper pullback entry.
In fact, the only fair value gap available in the structure
is the one that already formed during the shift.
At the same time, price has also closed back below the original range.
When these conditions occur together,
structure shift, respected fair value gap, and price returning inside the range,
it becomes possible to take the entry immediately
rather than waiting for a deeper retracement.
This happens because there is no remaining PD array
in that area that price needs to respect.
Earlier in the move, price already reacted to the important zones.
We saw price respect the low breaker block,
specifically the fractal breaker block,
and it also reacted to the fair value gap that was present in the structure.
Now that price has moved and closed below the range,
an aggressive entry becomes possible.
At this point, the stop loss can be placed slightly above the recent structure.
From there, the trade can be planned with a target
of at least a 1 to 2 risk to reward ratio.
That would place the first objective in this area.
As always, once price reaches that level,
the stop loss should be moved to break even
in order to eliminate risk from the remaining portion of the trade.
After that, the trade is allowed to continue toward the final target.
If we continue playing the chart forward,
the stop would be moved to break even once the partial target is reached.
As price continues to develop,
the market eventually moves further and reaches the full take profit level.
The structure of the strategy is very straightforward
when each step is followed correctly.
Let's move on to another example.
In this next example, the high and low of the 8AM candle
have already been marked on the chart.
These levels define the range that the setup will be based on.
After marking those levels,
the next step is to switch to the 1 minute time frame
and wait for price to interact with the range.
The key condition is for price to take either the high or the low of that 8AM range.
In this case, price moves downward and takes the low of the range.
Once that liquidity has been captured,
the focus shifts to identifying a market structure shift on the 1 minute chart.
Shortly afterward, a market structure shift forms.
Around the 9.30 market open,
price sweeps liquidity and then shifts structure shortly after.
In fact, the chart shows two shifts forming in that area.
At the same time, price also closes back above the previously defined range.
Looking at the available PD arrays for an entry,
we can identify an order block formed by the last down-closed candle
that participated in the liquidity sweep.
That candle becomes the entry zone for the setup.
The stop loss is placed below the recent low,
and the trade is planned with the opposite side of the range as the final target.
As with the previous examples,
the first step is to secure partial profits at a 1-2 risk-to-reward level.
That partial profit area would be located around this zone.
Once price reaches that level,
a portion of the position can be closed, typically around half of the trade.
The remaining portion of the position is then left open
with the goal of reaching the final target at the range high.
As the chart progresses,
price initially moves in the expected direction and reaches the partial profit level.
However, after the partial is secured and the stop loss is moved to break-even,
price reverses and returns to the entry area.
In this case, the trade closes at break-even for the remaining portion of the position.
Situations like this are completely normal.
Even though the second half of the trade did not reach the full target,
the first partial profit was still secured,
and the rest of the trade carried no risk once the stop was moved to break-even.
Interestingly, price eventually continues higher and later takes the range high.
Now let's look at one final example.
In this last example, we once again begin by identifying the 8am candle
and marking both its high and low on the chart.
These levels once again establish the reference range for the setup.
After marking those levels, we switch down to the one-minute time frame
and wait for price to sweep either side of the range.
Eventually, right around the 9.30 mark it opened.
Price moves upward and takes the high of the 8am candle.
Following that liquidity sweep, a breaker block forms on the chart.
This breaker block becomes the entry zone for the trade.
Breaker blocks are a widely used concept,
and there are many detailed explanations of them available,
so it is helpful to study them if you are not already familiar with how they work.
For this particular strategy, breaker blocks tend to provide some of the most
reliable entry locations after the liquidity sweep and structure shift occur.
Once the entry is taken from that breaker block,
the trade is managed in the same way as the previous examples.
The stop loss is placed beyond the recent structure,
and the initial objective is a minimum of a 1 to 2 risk-to-reward level.
When price reaches that level, partial profits can be secured,
and the stop loss is moved to break even.
After that adjustment, the remaining position is left open to continue toward the final target.
As the chart develops, price moves into the entry area,
triggers the trade,
and eventually reaches the partial profit level where the stop is moved to break even.
Shortly afterward, the market continues higher and reaches the final take-profit target.
In the process, price also moves high enough
to take the previous London session lows that were resting above.
This final example again demonstrates how the setup unfolds
when each step of the strategy is applied in sequence.
