I go through my tips for creating realistic paintings using acrylic paints. Watch and listen as I paint this 60cm x 90cm underwater seascape featuring two turtles. I hope you enjoy!
This post contains amazon affiliate links. If you use these links to buy something we may earn a small commission at no additional cost to you. Thank you.
One of the most frequently asked questions I get is how do I achieve realism with acrylics?
I know a lot of beginners struggle with this medium as their paintings may look patchy,
washed out or flat. I started out in exactly the same way and it's taken years to achieve
the realistic finish that I get with my paintings but I'm going to share with you my five best tips
for painting realistically in acrylics. Tip number one is about choosing the right surface to paint
For realistic paintings the smoother the surface the better. I achieve this smooth surface by
applying a layer of gesso and then sanding that layer until it is smooth. When painting realism
the grain of the canvas can actually interfere with the painting that you are trying to create
so having that smooth layer and that smooth surface really helps you appreciate the fine
details that you're trying to achieve in your painting. Tip number two is all about blending
to achieve smooth transitions. More often than not blending with acrylics is the most difficult
thing beginners face. It's so difficult because acrylics dry so fast. If you want to achieve a
smooth transition quickly then you're better off just using oils. However if you want to use
acrylics for your work you are going to need patience to achieve that smooth blended transition.
Creating these transitions with acrylics requires multiple layers of paint. You cannot achieve
perfectly smooth gradients in one go, not like you can with oils. When creating these smooth
large gradients I start with a basic rough blocking of colour and then let it dry. I usually don't use
much water at this stage as too much water can cause paint to peel in later layers. Peeling of
paint is when you start to apply paint over a layer and the new layer scrapes off or peels away
the paint from the original layer exposing the bare canvas. This happens for two reasons. One you
use too much water in your first layer or two you didn't wait a long enough time for your painting
to dry. To avoid the peeling use less water at the start of the piece and more water in later layers.
Number three is don't be afraid to make changes as you go through that painting. You can see how
in this section of the painting I painted in the rocks and the sea life of the background but then
decided I didn't like it so painted over that section. Instead of painting over completely
I use the semi-transparent glaze so that some of those shapes faintly showed through. Remember
there aren't any mistakes when you're painting just don't be afraid to change something that
you don't like. The new layers and the marks made by those alterations are going to be what makes
your painting look interesting and alive. Choosing a good reference is also very important for
creating realistic work. The references that I get are from wildlifereferencephotos.com.
It's really cheap and affordable and there are some fantastic pictures to choose from. That being
said it's also good to move away from your reference slightly. Don't just try and recreate a
photo try and put your own twist into the painting. For this one I've added some masks and some
plastic debris to emphasize some of the consequences of the last two years and its effect on the
environment. This brings us nicely onto step four which is use layers. There are a number of reasons
for this. One it improves the opacity of the paint and two it can really really help with the blending
and the colour transitions. Affordable acrylic paints tend to be less pigmented than their
equivalents in oils so the paint can look a little bit streaky when it's applied in a single layer
just like this. To remove those streaks there are two options. One is buy professional quality paint
which can be way more expensive than oil paints or build up your painting in layers like I did
with this cheetah. Here's my layering process. I like to start by blocking in and underpainting
in a single colour. In this case this dark blue mixed with raw umber. Again be careful not to use
too much water otherwise the next layer may cause that paint to peel off the surface of the canvas.
If you're unsure use a hairdryer and let the paint completely dry before moving on to the next layer.
Once this underpainting is dry I build up a layer of colour. You can see because I'm using acrylic
paints that the paint is still transparent. The advantage to using acrylics is that they dry so
fast you can build up the layers pretty quickly which is what I'm doing here. The other reason
for layers is it helps with achieving those smooth blended transitions between sections. By applying
glazes over your work you can soften the edges and blend areas of the painting together. You can then
work over the top with highlights and shadows as required. Quick tip here instead of using pure
white to mix for your highlights why not try using some buff titanium instead. It's a very pale yellow
colour but it really really helps to reduce the intensity of those highlights. You can see here
how I applied the same process with the turtle in the foreground. This turtle is slightly closer
so I'm making sure to make it brighter and more saturated than the turtle that's slightly behind.
This will push the turtle forward and emphasize the focal points for the viewer to look at.
And then my final and probably the most important tip is do not give up. This is a very long process
and painting in this way does take a lot of patience and without question your painting
will go through some very very ugly stages. You just have to persevere and keep going.
There are definitely loads of stages that just make you want to pick up that canvas and throw
it out of a window. The more time and effort you put into the painting process the better that
outcome will be. Getting over that frustration and that fear and spending time on a piece
is going to improve it. I've spent well over a hundred hours on this piece and it has been a
one occasion to actually pick up the brush and start painting just because I'm so frustrated
with how it looks. Nothing seems to be going right and I just don't think it will ever be
a finished piece. The only way to get over this is just pick up the brush and do it. Thankfully
I think all of my work and effort has paid off and I am really really happy with this piece.
What do you think? If you're not sure whether you'd rather use oils or acrylics with your
painting, why not check out this video that me and Amber did where we discuss why we use
acrylics for our realistic paintings. As always thank you so much for watching and I'll see you
next time!