" I Challenged My Students to Recreate My Giant Chocolate Panda?"

Cake Drawing Ideas
8 followers
Comments are disabled for this video.
I'm going to craft a gigantic chocolate stuffed animal panda,
but I won't be working alone.
Behind me are 14 of my students here at the Pastry Academy in Las Vegas.
And during the course of this week,
they will be challenged to create the same chocolate panda as me.
But to keep things fair, their version will be a lot smaller.
That's right, they will all have to make a small replica of my giant panda.
Each day will have his own set of challenges.
And by the end of the week, you guys will crown a winner.
Are you guys ready?
Let's go!
To start our week, the students will learn all of the theory and math
that is involved in the making of the chocolate piece.
Then, I am showing them all of the techniques we use to make the sculpture.
Crafting all the elements, proper gluing point,
creating and applying the chocolate paste, sculpting, smoothing and spraying.
Then, at the end, we'll focus on all the little details.
Obviously, there is way too much to cover in this video,
but do not worry, I will be checking on them throughout the entire week.
Now, let's start our giant panda.
To craft the body, I need two things, a mold and chocolate.
I'm gonna take the chocolate and pour it in the mold.
And I'm going to spin it to cover all the surface of the mold as fast as possible.
You don't need a workout after this.
I'm spreading an even coat of chocolate inside the mold.
Now that the chocolate is set, let's unmold it.
And obviously, to make a full body, I need two of those.
Now, I can just warm the edge, add chocolate and glue them together.
I'm smoothing everything and this will complete our body.
Now that the body is done, the next step is the head.
And for the head, I'm gonna need a sphere mold and chocolate.
I'm taking the bucket, filling the sphere and I'm gonna roll the chocolate around.
And once we're done, we'll put it back on the bucket to remove the excess.
When the chocolate is set, we can unmold.
First, the tape.
And that's the head.
Now that the head is casted, let's glue the cheeks.
I cut two parts of a bigger egg that we're going to glue onto the head.
I get my paste ready.
Perfect.
And I'm gonna use my bowl scraper to smooth everything.
Now that the cheeks are on, let's add some volume.
I'm using milk chocolate to blend the cheeks together.
It's hard to see that it's a panda yet, huh?
Okay, now I can work on the back of the head.
It's already a heavy baby.
I'm gonna shave the angles to make everything rounded.
And now, I can seal the back of the head.
The head is ready.
Let's do the nose.
I cast a bowl and I'm gonna glue it right in the front.
Right here is perfect.
I'm gonna add paste to blend it in and fix it in position.
And now the nose is on.
I know it doesn't look like much yet, but trust the process.
We're adding a little bit more volume, but it has to remain a stuffed animal.
I'm adding the nose.
Now I can breathe.
So, does it look like a panda yet?
What do you guys think?
I'm smoothing everything and adding a little bit more volume to the head.
All right, I made a perfect stencil for the eye patch
and I'm going to cut it perfectly symmetrical.
Nice.
I'm gonna add some paste all around to accentuate the pattern.
Now that we are done with the rough shape, let's move everything using chocolate.
I'm adding more chocolate.
Wow, look at this shine.
All right, that's it for today.
See you tomorrow.
All right, I can do this.
This is way too heavy.
It's gonna be tomorrow's problem.
Okay guys, I slept on it and I think the best way to fix our problem
is to cut the head open and remove as much chocolate as possible to make it light.
It looks crazy to do this, but you'll see it's not gonna be a big deal to glue it back together.
All right, let's open the back of the head.
Oh my god, okay.
All right, no problem.
I'm gonna fix this.
We're just gonna trust the process and remove as much chocolate as possible from the inside.
Wow, look how much chocolate we're saving.
This turned out to be a much bigger project than I expected.
It broke crazy.
I hope it's not gonna put me behind.
All right, it's a little bit of a puzzle.
To make sure it's gonna be structurally sound before I glue it back together,
I'm gonna add a cylinder in the center that will help the body hold the entire weight of the head.
I'm gluing the head back together and smoothing everything out.
All right, I only have one piece of the puzzle left
and then I can patch the rest with paste.
Perfect.
All right, now everything has been glued back together,
but I have a lot of cracks and bumps.
So I'm gonna shave everything off and fill in the cracks.
So we use our liquid chocolate and go straight inside the cracks.
All right, now that we're done with the face,
let's see how much chocolate we're able to remove from the head.
6.2.
Wow, about 12 pounds of milk chocolate and how much dark.
We're able to save about 8 kilos or 16 pounds of dark chocolate.
Now the head should be light enough to fit on the body,
although it's still very heavy.
Let me try.
Oh yeah, it's much lighter now.
All right, let's move on to the body.
For this next part, I'm gonna need a lot of chocolates.
We're gonna cast pots and turn them into legs.
Let's go.
When it's full, then we unmold.
That's it.
Now I'm gonna cut a hole into them to make them lighter
and start stacking to create the legs.
Okay, I'm using a blowtorch, warm up my ring
and I'm slowly going to melt my way through the pot.
This will make each leg lighter and sturdier.
Now that we have all our circle, we can start stacking them
and creating our perfect legs.
Now that we're done gluing the base of the legs,
we're gonna try to smooth them using the acetate roll technique.
I'm gonna pour chocolate and smooth everything else.
I'm pouring the chocolate.
Nice.
And then using my acetate roll, I'm going to go at the very base
and smooth everything.
Nice.
I'm gonna do that everywhere.
All right, the legs are ready.
Let's glue them onto the body.
We apply our chocolate and boom, glue it in position.
Now I'm going to add paste to smooth everything together.
The legs are on.
Let's cut them to the right length so we can attach the feet.
Now we're ready to make our feet.
Okay, I filled the balloon with cold water.
Now I'm gonna dip it to create the paws.
We're at the maximum here.
And now I'm gonna let it set onto a parchment paper.
The chocolate is set.
Let's pop the balloon.
I'm going to catch the water and then let's place the feet.
The legs are on.
Let's glue the tail.
Smoothing everything with some paste.
Now is the time for me to cut the top of the body
so I can adjust the head in position.
Hello?
All right, nobody's home.
Now we're gonna add a pillar in the center
to make sure the head is well supported.
Perfectly lined up.
Nice.
I'm going to use a hot tray and a level
to make sure that the top of the body is perfectly straight.
Right now it's a bit uneven.
I have to make sure I melt it
so that everything is perfectly straight.
Yeah, right here.
I think our head is never gonna fit in the frame
so we need to zoom out.
Yeah, much better.
All right, ready to glue the head.
Oh, it's a big baby.
That was epic.
Let's put the eyes on.
Now that we're done with the head,
let's make the ears.
I'm gonna bend my mold on top of a bowl to create a curve
and then use chocolate.
And naturally it's going to create a curve.
Beautiful.
All right, once it's set, I can just unmold.
Look at this.
Super cool.
Now that we have the base of the ears,
we're gonna use chocolate and a clown balloon
inflated with cold water to create a perfect edge.
So what we have to do is just to take it,
dip it into chocolate.
Look at this.
Nice.
And before the chocolate fully set,
I'm gonna curve it around a ring.
This is always a very fun technique.
Nice.
Now I'm gonna tie the balloon to lock it in position.
When the chocolate will be set,
we'll be able to pop the balloon and reveal the shape.
All right, now that the chocolate is set,
we can cut the balloon.
Perfect.
I'm gonna catch it and when the water is gone,
I can just pull the balloon out.
Now all we have left is the chocolate.
We can slide the ring off, deacetate,
and now we have the perfect edge.
All we have to do is to glue it on the base.
Nice.
All right, the next step is to put chocolate inside the ear
to blend everything together.
It's gonna make it super smooth.
And we dump it out.
The ears are ready, let's glue them on.
Now let's add some paste to smooth them.
Isn't it the cutest little panda?
I'm going to melt the casted pot at an angle,
so when I assemble them, it's gonna create a curved arm.
Our pipe are melted, let's glue them together.
We're then gonna adjust our paw right here
and glue it in position.
I'm going to shave off the excess and then apply the paste.
I'm going to cast the details on the paws.
First, I need chocolate.
I'm going to pour it between the bars.
Right now, we're crafting the toes of the pandas
and I'm gonna use plastic wrap on top of our lamination
to round them up.
Come see.
Once the plastic wrap is applied,
I am using a heart and oval shaped cutter
to create the paw pads.
They're gonna set just enough for me to peel off the plastic
and pop them off.
I'm just unmolding the toes.
I'm gonna wait for them to fully cool off
before I can assemble the full paw.
Look how nice.
Toes are ready, let's glue them on.
We're gonna wait for it to set fully
before we can pull up the plastic.
Let's pull the plastic.
Wow, it left the perfect print.
I can now remove the excess
and the arm will be ready to be glued on.
The arms are ready, let's glue them on.
All right, I'm bringing in the panda.
He's a heavy boy.
Now that everything is attached,
I can start adding the final volume to the piece
by adding a little bit of rolls in the front and in the back.
I'm gonna smooth the body before we can spray.
That should wrap up my day.
Spring time is tomorrow.
Before we spray, I want to add a fun detail in the back.
I'm gonna craft a zipper 100% out of chocolate
and at the very end, create some cotton using cotton candy.
I'm gonna turn the bear.
I'm first going to create a pocket with some milk chocolate paste,
then I will add the dark chocolate teeth.
This will really make it look like a stuffed animal.
I'm blending everything together, then we can add the zipper teeth.
The next part and my personal favorite,
it's adding the zipper teeth.
I cut out all the elements to craft my zipper handle.
Let's assemble it.
Perfect.
It looks so cool.
Now I'm gonna customize the zipper by adding my logo right here.
Our gigantic panda bear is ready to be sprayed.
Let's go.
For a project this big, I have to gear up.
Let's go.
We're starting our spray with a pure coat of cocoa butter.
It's hard to see, but this will create a fur-like texture.
Once it's set, I will begin by spraying all the elements that need to be black.
The next step is protecting all the parts we just sprayed,
leaving only what will be sprayed white exposed.
Finally, the most satisfying part, removing all the tape and revealing the panda.
Well, this was a lot, but the spraying is done.
Now let's work on the detail.
I'll begin with the eyes.
I'm removing the stencil, then we're gonna place them.
Now you can see.
To bring life to the eyes, we have to put one white dot in the corner.
We're adding the paw pads to the hands and the feet.
Now that the front is done, let's finish the back.
I'm adding all our beautiful gold zipper teeth.
And finally, the slider.
And the cool thing about it, you can actually play with it.
For the very last touch, I was thinking of making cotton candy
to resemble the cotton inside the stuffed animal.
So all I need is sugar and my cotton candy machine.
Let's turn it on.
Oh wow, it's starting already.
Look, I'm gonna shape it into a ball to make it look like a perfect cotton ball.
All right, that's it.
I think it's just enough to fill into the gap.
Let's put it in.
I'm gonna tuck it in.
Oh wow, it's incredible.
Look at this.
Do you guys love it?
I think it turned out so cool.
Now let's go check on the students.
As you know, my students have been working beside me all week on their pandas.
To recap, they have learned piping, casting, modeling, sculpting, and spraying.
Now I am helping them customize all the little details they need
to bring their pandas to life.
Each of them were able to put their own personality into the piece
and I am so excited for you to see them.
I'm done with my piece and so are my students.
Let's take a closer look at their work.
I'm gonna let you enjoy my students' creations
and keep in mind everything is 100% edible.
You guys did awesome.
Did you like it?
All right, we selected the top five showpieces for you to be able to vote.
Number one, number two, number three, number four, or number five.
Make sure to pick your favorite panda in the comment section below.
All right guys, we're done.
Let's go home.
