🏰🪓 No machines. No shortcuts. See how a real castle is being built using 13th-century techniques.⏳🔍
Fortified castles and cathedrals are the most iconic examples of medieval architecture. And yet, even after so many centuries, they still hold secrets within their solid stone walls. The biggest riddle of all: How were these monumental buildings constructed using the technology of the time?
In 1995, a group of audacious archaeologists took on a crazy challenge: To build a medieval-style castle using only medieval methods and materials. They’re still at it. In Guédelon, in the forests of Burgundy, a castle rises, stone by stone, tier by tier. Why set themselves such a difficult task nearly a thousand years too late?
This exercise in experimental archaeology will add to our knowledge of the Middle Ages. By pitting 21st-century theories against 13th-century experience, all this heavy lifting will smash preconceived notions and build a new foundation for understanding medieval architecture. Short of taking apart an existing medieval castle, the Guédelon project is perhaps the only way to truly unlock the secrets of the medieval builders. By examining each part of the castle in turn, we’ll discover how the most emblematic structures of the time were built.
This documentary is available with english subtitles and many more languages !
The fortified castle of Guédelon,
an extraordinary monument rising in the middle of a forest in the heart of France.
Guédelon is a crazy human undertaking.
Here's the challenge.
To build a fortified medieval castle in the 21st century
using only the construction techniques that existed in the Middle Ages.
It's reverse archaeology we build to understand.
No one has ever been able to study the construction of a castle
from a craftsmanship approach before.
This bold adventure boosts our knowledge of a time
when builders were pushing the limits of construction.
There were a lot of castles and churches built in the Middle Ages.
There were all kinds of important innovations.
Castles were where the most advanced building expertise
for civil construction was being developed.
Over just a few decades, an extraordinary number of innovations
gave castles the iconic form we all recognize today.
It was a new kind of architecture based on entirely new principles
which enabled them to completely revolutionize their system of defense.
How did they develop these new techniques
and what military problems did they solve?
It's one of the most powerful models in the history of fortified castles.
How did these castles benefit from cathedral construction,
the other ambitious building projects of the time?
Groin vaults revolutionized construction in the Middle Ages.
The teams moved around.
They arrived with the knowledge of certain techniques.
Once they had built one groin vault,
they knew how they worked and they would build more.
Discover the ingenuity of medieval builders
from extracting raw materials to constructing the ramparts.
The inside of a two meter thick wall will stay damp forever
by way of avant-garde woodworking techniques.
It's genius.
It's an infinitely complex system
taken to the highest degree of perfection.
Through the remarkable experience of the workers at Guédelon,
interviews with leading experts
and spectacular 3D reconstructions,
you're about to discover the secrets of the builders of the Middle Ages.
In the heart of rural France, 180 kilometers from Paris,
stands an impressive building straight out of the Middle Ages,
the fortified castle of Guédelon.
Its walls are 12 meters high with corner towers 15 meters tall,
which are themselves dominated by a massive inner keep
whose roof will soon culminate at a height of 31 meters.
This isn't the site of an old castle under restoration.
It's an exceptional medieval monument
that has been built entirely in the 21st century,
yet exclusively using 13th century tools.
It will be a few years before it's done,
but this 3D reconstruction shows what it will look like when it's finished.
The building itself may be contemporary,
but its shape seems oddly familiar.
That's because it's based on a style of military architecture
that has survived the ages.
In the late 12th and early 13th centuries,
the design of fortified castles was revolutionized.
Instead of having a single tower on a mound
with a fairly basic enclosure around it,
castles suddenly took on a very geometric,
carefully thought out and rationalized shape
that had been designed to make defending it both systematic and automatic.
Within a few decades,
castles like these started popping up all over France.
The design was efficient and sturdy,
so much so that many of them are still standing today,
some 800 years later.
For castles like these to become the symbol of the Middle Ages,
one king had to play a decisive role,
Philip Augustus.
When he ascended the throne in 1180,
he inherited a weakened kingdom.
France was under threat from England,
whose territorial hold had been strengthened by a clever marriage.
During his reign, Philip Augustus led a bold policy of conquest.
And on every piece of land that he took back from the English,
he built fortifications to defend his kingdom and symbolize his power.
This strategy made him one of the greatest builders of the Middle Ages.
It was a success.
By the end of his reign,
France had become the most powerful kingdom in Europe.
For King Philip Augustus,
fortifications were a tool of propaganda and a way to shape the land.
Whenever he took over a city,
if it already had a castle,
he would add a large tower as a symbol.
If the city didn't have a castle yet,
he would build one.
He wanted to leave his mark to symbolize that it belonged to him now.
These symbols were all the more powerful as this model,
on which the builders at Guédelon are basing their fortified castle,
was reproduced over and over again all across France
for some very down-to-earth reasons.
Philip Augustus recruited economists to set prices for specific jobs.
We have documents saying that a large tower cost 1,500 pounds, for example.
That led to a certain standardization in building.
In order to stick to the budget for a given length of wall,
whenever they built one, it was the same thickness.
The arches were the same shape and all the towers were based on the same model.
Philip Augustus established the basic elements of his design shortly before 1200,
when he built the Louvre Castle west of Paris.
This building, which has since been destroyed,
was intended to protect the city from a British invasion.
It was a wonder of geometric perfection.
Its stone walls formed an almost perfect square,
70 meters by 75 meters and 15 meters tall.
They were slightly inclined at the base, as were the towers at the corners,
which overlooked the wall walk with its crenellated parapets 18 meters high.
The two doors in the middle of the walls were flanked by round towers
that protected the entrances to the castle.
And the two walls without doors were reinforced with an intermediary tower
that stuck out from the walls.
Finally, in the center of the fortress was the big tower,
which was 31 meters high, not including its rooftop,
surrounded by a 10 meter wide ditch.
The castle was built next to the small wall that surrounded Paris.
Paris wasn't very large, so the castle could be seen from the city,
but also by everyone who came to Paris.
It was a powerful symbol in this city that would later become the capital
and the most important city in the kingdom.
Naturally, this model eventually became the model for all the rest.
The term Capetian, taken from the name of the dynasty
from which Philip Augustus descended,
is sometimes used to refer to this type of fortified castle.
And it was this model that the builders at Guédelon chose
for their incredible project of building a 13th century castle from the ground up.
In agreement with the scientific committee
charged with ensuring the historical authenticity of the project,
they made up a petty lord to act as the patron and lord of Guédelon
and decided that construction would begin in the year 1229.
Any lord would build a castle that was within his means
and in line with the rules on fortifications.
There was a hierarchy in castles based on your social standing.
A knight wouldn't have had the same kind of castle as a baron,
a duke or a royal peer of the land.
Here, they decided to build a small castle with a small keep
and a main tower without a ditch around it,
but with all the most important parts of any Capetian castle.
If we were to compare it to the iconic Louvre castle,
the castle of Guédelon is 52 meters wide instead of 75.
The towers are 15 meters tall instead of 18,
and the big tower measures 21 meters tall without the roof instead of 31.
Guédelon castle is certainly more modest in size,
but it's still a very impressive structure,
and it requires a lot of work to build.
After choosing their model, the workers can get to work,
uncovering the secrets of the builders of the Middle Ages.
They're using experimental archaeology methods,
which consists of recreating techniques from the past
based on historical sources provided by the scientific team.
The advantage of experimental archaeology
is that it's archaeology in reverse we build to understand.
Experimental archaeology enables us to answer the questions
with which historians and archaeologists are left
whenever they discover a dig site or study a building.
How many workers did it take to build?
How long does it take to carve a block of stone?
We don't know any of that.
But by doing it ourselves, by building and using the tools,
and taking a different approach to archaeology,
we'll do our best to answer these questions.
The first thing to understand when you start building a fortified castle
is how the construction site was organized.
The person in charge of making the Lord's wishes a reality was the foreman.
He hired the workers, oversaw the supply of materials,
decided on the dimensions of the building, and designed the layout.
It was an essential role and a complicated one at the time.
In the 13th century, foremen for castles were experienced manual laborers.
In contemporary texts, they were referred to as master masons or master carpenters.
They didn't have the modern notion of the architect at the time.
That didn't come until around the 16th century.
The foreman was in charge of organizing and regulating
all the different units of measure.
You'd have carpenters speaking in canes for one thing
and feet for another,
and then stonemasons who used a different kind of feet.
So the foreman was in charge of unifying all of that.
One crucial step when building a castle
is obtaining the raw materials needed for construction.
A structure like Guédelon takes no less than 10,000 cubic meters of stone,
along with a large amount of wood for scaffolding, roofs and tools.
The location and its surroundings were crucial
because a whole economy was created around the work site.
So they needed somewhere cheap.
That's what guided constructions during the medieval period,
because building a castle came at a phenomenal cost,
particularly in terms of transport.
Just imagine if they had to bring stone from 20 kilometers away,
which is a day's transport.
The roads were so bad, so it took a lot more labor,
resulting in colossal costs.
As a result, they tried to get their supplies from as close as possible.
The Guédelon project chose a location next to an old quarry
in the middle of a forest, solving numerous supply issues.
The quarry worker is there every day
to supply the site with all kinds of stones.
Today, he's taking on one of the largest blocks ever
to be extracted from this quarry, a piece weighing nearly 10 tons.
To get it into position for cutting,
he'll need the help of several of his colleagues.
It's sedimentary rock on an oceanic base,
which means it's made up of many layers,
usually parallel, one on top of the other.
The layers are friable, like layers of iron.
It's like granite. It's really hard.
Since the knowledge of the medieval quarrymen has been lost to time,
the workers at Guédelon have had to relearn thousand-year-old techniques.
The first task is to read the stone.
We find a layer of stone and mark it.
I can see that this part has some nice parallel lines.
This is the direction of the bedrock, the direction of the foliation.
And these lines will help me carve out the block.
It's too big to be broken simply by hitting it with a mallet.
So the quarry worker carves holes into the rock,
into which he inserts pieces of metal to act as wedges.
This method existed long before the Middle Ages.
The Egyptians obtained their blocks of stone in the same way.
It's the most basic method for breaking a stone without forcing.
But the stone in Guédelon is temperamental and doesn't give way that easily.
In this case, the stone seems to be breaking in the exact opposite direction.
The block didn't split in two as expected.
So they have no choice but to remove the first few fragments
and start again until it gives way.
Next, it's broken into several smaller pieces
that the stone carvers and masons can use.
Using this method, a single quarry worker can produce one cubic meter
or approximately two tons of stone per day.
This material is now ready to be integrated into the walls,
known as curtain walls in military terms.
But what shape and size will these walls be?
The most common kind of warfare back then was siege warfare,
with a combination of weapons hurling heavy objects at the wall and sabbing,
which was used to bring down the walls.
We know today that the siege engines they used had a much higher capacity
for destruction than we originally thought.
They could shake their entire walls and bring them crashing down.
So the fortifications had to be adapted for that reality.
In keeping with the Capetian model,
the castle at Guédelon is smaller than most castles in the early Middle Ages,
which means it's more compact and therefore more likely to withstand attack.
There are no openings in the curtain walls
to avoid creating a weak point for siege weapons to target.
They're angled at the base, which makes them more stable
and prevents the enemy from digging through the foundations.
In the most powerful fortresses, such as the Louvre,
the bottom of the moat was even laid with stone for added protection
and filled with water if there was a source nearby.
Capetian castles were designed as a single impenetrable shell
from top to bottom.
It was a very effective model from a military perspective
and also reflected the evolution of society in general.
Capetian architecture was a way for the aristocracy to set themselves
even more apart from the farmers who surrounded them
and acted as a visual symbol of their social status
through an architecture of power, a residential style of architecture
that was reserved exclusively for the aristocracy
and had nothing in common with the farmsteads
in which the nearby peasants were living.
As you can see at Guédelon,
the ramparts of the Capetian castles had another thing that made them unique.
They all had towers at the corners, which were crucial for defense.
Philip Augustus valued the importance of arches
and designed his castles with them in mind.
You can see from this arrow slit here that it would have been impossible
for attackers to climb the walls to get access to the parapets.
If the commando attackers managed to take the ramparts,
they would gain access to the arrow slits from inside the courtyard
and would therefore have control over who came and went in the castle.
At that point, the castle was half fallen already,
so it was very important to prevent the attackers from climbing the walls.
The arrow slits were positioned in such a way as to be able to cover
the whole wall without any blind spots.
The towers of Guédelon are round and with good reason.
With square towers, you can't place arrow slits at the corners
because they would weaken the walls.
As a result, there are blind spots that protect attackers.
The round towers of Capetian castles, however,
have arrow slits facing every direction.
They're staggered between levels, thereby minimizing blind spots
without weakening the masonry.
The towers stick out from the curtain wall,
giving them line of sight of the entire wall.
This is called flanking fire.
They're spaced approximately 30 meters apart,
which is the distance at which a crossbowman,
after taking shelter to reload, could hit their target accurately.
With very long walls such as those at the Louvre,
they added another tower in the middle.
The defenders spaced out along the parapet walk covered the gaps,
leaving the attackers with nowhere to hide.
Men with crossbows occupied the lower arrow slits,
where they were the deadliest.
Regular archers were posted at the other openings and along the ramparts.
This impressive system was not invented in medieval times.
It has existed since antiquity.
But the Capetian model added one essential innovation.
In Roman fortifications, the towers were solid as far up as the rampart walk.
There were no interior rooms, so the towers could only be defended from the top.
These hollow towers, pierced with arrow slits,
changed the dynamic of fortifications in the 13th century.
Arrow slits are shaped like a triangular opening in the wall.
The shape can vary.
In English fortifications, they're located at the front of a wide alcove.
In the Capetian model,
the alcove is much narrower to preserve the solidity of the wall.
The slits are one to two meters high and often directed downwards,
making it easier to shoot at attackers on the ground below.
No matter the design, they were always built with extreme care.
It's a very technical job for the stonemasons
because the side walls of the arrow slits must be particularly straight.
In the 13th century, there were no sights on the weapons themselves.
The walls were the sights.
The archers stayed inside the room, prepared their weapons
and had just a few seconds to shoot.
So they used the walls to aim properly.
If the enemy managed to gain access to the wall walk,
despite this first line of defense,
the occupants of the castle still had a chance at victory
because the towers played another essential role.
The towers are always higher than the rampart walk.
They command the walls in the sense that they tower over them,
which means that the soldiers could chase attackers off the ramparts
from the towers up above.
And since the stairs down into the castle were often located within the towers,
just because the attackers had taken part of the ramparts
didn't mean they could actually get down into the castle itself.
Flanking towers and their arrow slits
marked a turning point in the history of fortifications
because soldiers could now play an active role in defending the castle.
The main concept behind Capetian fortifications was active defense.
Before, castles were merely passive.
The inhabitants would wait for the enemy behind the walls of the castle.
The concept of active defense meant coming up with a new kind of architecture
based on entirely new principles,
which enabled them to completely revolutionize their system of defense.
The model they were inventing would persist over time
and play a very important role in history.
It was used until 1500 or 1550, the very end of the Middle Ages,
or even the beginning of the Renaissance.
Even with the advent of artillery in the early 15th century,
they kept building castles using the Carpetian design.
So it's really one of the most powerful models
in the whole history of fortified castles.
These principles of defense have a direct impact on how castles are built.
These stonemasons are currently working on the arrow slits in this tower.
We always build the walls the same way.
First, we place the carved stones,
which have been prepared for us by our friends the stone carvers,
in this case for the arrow slits.
For each stone, we have a wooden template
to ensure the stone has exactly the right shape.
There's a difference between carved stones,
which have smooth faces and nice clean edges,
and the irregular blocks that go in the middle,
which have been left unfinished.
Not all stones have the same level of finish.
It depended on the wealth of the person who is financing the construction,
and it had an impact on the construction of the arrow slits,
as well as the appearance of the walls.
This is a low-budget construction.
It's for a petty lord with limited means.
It's not a castle for a king or a duke
where every piece of stone would have been carved.
We save money where we can.
But in the end, every piece of stone extracted from the quarry
will be used for something, depending on its qualities.
Nothing goes to waste.
We keep lower-quality stones to fill in the walls.
You can see the difference in the color.
It's almost like sand.
We couldn't use these on the exterior
because they wouldn't be able to withstand the weather
or other factors to which they might be exposed.
We glue the stones together using lime mortar mixed with sand,
one part limestone and two parts sand.
The mortar we use dries very, very slowly.
With the bricklaying mortar we use on a joint like this,
it'll dry at a rate of about one to two millimeters per month.
I mean, just imagine the inside of a two-meter-thick wall.
It'll stay damp forever,
which is an advantage for us and for the building itself.
The fact that the inside of the wall will remain humid for so long
makes it more resilient.
If there's any ground deformation caused by drought,
we know our wall will be able to withstand it more easily.
That's one of the secrets behind the strength of medieval buildings.
To get the stones into position,
the masons used an iconic medieval device
known as a squirrel cage.
The squirrel cage we use at Guédelon today
is an essential device that gets used every day,
just like it would have been in medieval times.
In the 13th century,
it was the only way to hoist materials into the air.
They appear in a lot of iconographic representations,
such as paintings.
We know what they looked like,
which is how we were able to build this replica here.
Also known as a treadwheel crane,
this predecessor of the modern crane
was used to build countless medieval structures.
It's put into motion by one or two men walking inside one or two drums,
which winds the rope supporting the load around its axle.
Pulley mechanisms multiply the force,
enabling workers to raise four times their weight,
up to 500 kilograms, at once.
The device rotates 360 degrees,
which means it can be used anywhere
within a radius of four meters all around it.
By using this device 10 to 15 times per day,
the masons of Guédelon have raised no less than 8,000 tons
and thousands of cubic meters of material since construction began.
Another ingenious medieval device, known as a put-log scaffolding,
used logs to support a building platform for the masons.
This simple system enabled them to reach dizzying heights.
To support the scaffolding above the ground,
they placed 2.5-meter-long logs one meter into the walls.
This means that during construction,
they had to drill holes the size of the logs,
spaced vertically every 1.4 meters, for the future scaffolding.
As the walls get taller,
they insert the logs into the holes carved into the wall
and move the building platform up a notch.
Then the logs from the previous levels are dismantled and reused,
thus saving money on wood.
The put-log system is very clever
because it's lightweight and easy to put in place.
It would have been much too expensive
to build wooden scaffolding from the ground up.
The other advantage of put-log scaffolding
is that it can be used throughout the castle's lifetime.
Once the logs are removed, we put a stone stopper into place,
which can be removed later to make modifications to the castle.
They could put the scaffolding back into place at any time
if the castle was attacked or needed to be prepared.
It was an economy of scale
that was part of what made medieval stonemasons so ingenious.
Today, you would have to rent the whole metal scaffold all over again.
The best example of a medieval builder's ability
to create complex structures using simple tools
is undoubtedly the method they used
to trace the lines and shapes of their buildings.
Here's a demonstration with the foreman's two most essential tools,
a ruler and a compass.
To trace an opening, we'll start with the basics,
which is to say by drawing what is called the spring line,
the point where the arch will begin.
Then he uses the compass to draw another axis
in the middle of this straight line, the bisector.
He now has everything he needs to draw whatever arches he likes,
starting with a round arch.
It's a half circle, so using my compass,
I can create a semicircular arch.
This kind of arch redirects the force to either side of the opening.
It's perfectly suited for lower parts of the building
that support a lot of weight.
You can find them in Guédelon under the stairs of the main building.
In a similar way, you can create a basket-handle arch.
This time, I will put my pivot point lower,
which will give me a flatter arch.
You can find arches like these in Guédelon on the main entrance,
where it connects two towers with an immense passageway underneath.
These arches are typical of Romanesque architecture,
but you can also trace the forms of Gothic architecture,
which is best represented by the great cathedrals
of the 12th and 13th centuries.
These so-called broken arches are made up of disparate parts.
One example is pointed arches.
To trace one, we'll start by dividing the spring line
into three equal parts.
Then we take the compass and place it at two-thirds of the opening.
This type of broken arch, known as a pointed arch,
is used in Guédelon in the main building behind me.
There's one right above my head.
Using the same technique,
one can also create even more elongated arches.
We can create another kind of Gothic arch that goes much higher,
which is called a lancet.
I'm going to add around a foot on each side,
a stroke of the compass here and a stroke of the compass there.
Arches like these are found in large Gothic buildings
like Saint-Chapelle in Paris,
and they create very narrow, extremely high openings.
They might not have known how to write,
but they had complete mastery of the compass.
That's what the Middle Ages gave us,
proof that you can go from a simple shape
to the most complex shape in existence,
like the rose windows in cathedrals,
using nothing more than a ruler and a compass.
These workers' unique knowledge made them widely respected.
The men working on medieval construction sites were highly organized.
They had a certain number of days off each year
and would choose to leave one building site for another.
They were in high enough demand that they were free men.
Very early on, they developed an internal hierarchy based on corporations.
They also had sort of scholarships so that disabled workers and widows
could have a salary to live on for the rest of their lives.
A sense of solidarity among workers developed very early
in the world of medieval construction.
Large building projects in the Middle Ages,
some of which lasted for decades, such as those of the great cathedrals,
were at the forefront in every field,
including the economic and social sectors.
The construction of the castle at Guédelon
is taking just as long, but for different reasons.
This is an experimental building site,
which means that we're experimenting, we're taking our time
and we're open to the public.
It's a long-term construction site.
In medieval times, they needed to be able to protect themselves fast.
So castles were built fairly quickly.
The builders were highly experienced.
They were in good health and they were experts at what they did.
The Louvre castle, for example, was built in just 10 years,
which is pretty fast.
Despite the speed at which these structures were built,
the construction of the main door required the greatest attention.
It was the weak point of any fortress.
Capetian castles came up with an ingenious way to defend them.
It's much cheaper to bribe a guard to open a door
than it is to actually lay siege to it.
As a result, most strongholds actually fell due to treason
rather than anything else.
The main idea behind defending the entrance
was to split the job of opening the door into several different tasks
to ensure a single trader couldn't open the door on their own.
It took three people, including an officer,
who would be more expensive to bribe to operate the opening system.
Placed under the fire of the archers who dissuaded any attackers,
the door also has three defensive elements.
The first is the deadfall trap.
This opening in the floor of the hall on the second story
could be used by guards to communicate with anyone who wanted to come in,
but also to throw projectiles such as stones down on them
if they tried to force their way through.
The second element is the portcullis,
an imposing metal grate set vertically into strong stone supports.
It was raised from the second floor.
The third element is the massive wooden door
which was opened by the doorman from inside the courtyard.
This array of defense mechanisms is a wonderful illustration
of the principle of active defense.
If an attacker were to manage to penetrate all of these systems of defense
and gain access to the courtyard,
they would find themselves faced with the last line of defense,
the most famous part of any Capetian castle,
the Tower Keep, which historians also call the Big Tower.
With a diameter of 12 meters, walls four meters thick at the base
and a height of 31 meters from the base of the walls to the tip of the roof,
it's the most imposing tower at Gatelan.
In the Middle Ages, the Tower Keep could be used as a prison,
a residence or a place for storing valuable items.
But its true purpose lies elsewhere.
They were primarily symbolic.
The inner keep was the highest part of the castle,
so it was also the most visible from afar.
Remember that in Middle Ages, there weren't that many tall buildings,
so castles stood out very prominently in the surrounding area.
The keep represented the Lord's power.
The size of the main tower was often a reflection of how powerful the Lord was.
The larger the diameter and the taller the tower,
the closer the Lord was to the king.
The highest tower of all was, of course, the Tower of the Louvre,
where the lords of the kingdom came to pay him homage.
The visual impression created by the big tower was essential.
And that went for the interior architecture as well.
Gatelan has a groin vault with six ribs,
typical of the latest technical innovations at the time
and common in Capetian keeps.
Early keeps and towers had wooden planks,
and when they were attacked, they would be set on fire.
So, very early on, they started building them with stone vaults instead.
But they were also an artistic symbol.
The design and the shapes created by the ribs on the ceiling were super important.
And while this invention was originally used for religious architecture,
it was later developed for use in civil architecture, most notably castles.
They created a graphic effect out of the vaulting,
and it impressed people, which is what they wanted.
At seven meters across,
the vault on the second floor of the keep is the largest in the castle.
The ribs are built out of 84 stones known as voussois.
Above them are 150 tons of masonry,
putting approximately 25 tons of force on each rib.
Because it was built after other vaults in the castle,
this one benefits from the experience of the stonemasons,
who are gradually uncovering the secrets of the builders of the Middle Ages.
The most important part is the order in which things are built.
First, we put a wooden frame in place at the top,
so we can create the ribs of the vault.
To prevent the voussois that make up the ribs from moving around,
and so they can be lined up properly, they need to have a meeting point.
That meeting point is the keystone.
The keystone is the first to be put in place on the frame,
without using any mortar.
Then the masons place the voussois one by one until they meet at the keystone.
The last stones to be put into place in a groin vault are called the counter keys,
which connect the ribs to the keystone.
Once the vault is assembled, an important question arises.
Should they remove the wooden frame,
thus shifting the load onto the vault before or after it's covered?
What we discovered at Kidolon was that it was absolutely necessary
to put the weight onto the ribs because otherwise the stones wouldn't stay in place.
They're held in place by the wood.
If we waited until the end before removing everything,
it was at risk of collapsing.
These vaults show how much religious architecture,
especially the techniques used to build cathedrals,
contributed to the architectural innovations of the Middle Ages.
The teams at Kidolon visited several cathedrals
to understand the builders' methods, most notably that of Borsche,
just 90 kilometers away, which was built during the same period.
It presented an incredible challenge for the masons at the time.
It's massive.
The form they used for the vaults must have been gigantic.
There are no log holes in the columns, so they built it from the ground up.
Wow.
What drove these men to push the limits of construction so far?
How did they come up with the idea of groin vaulting?
To find out, we have to imagine ourselves in the context of the time
when cities were buzzing with progress.
The role of a cathedral was to unite the people of the city and give the city meaning.
Every city wanted to have the most beautiful cathedral.
They were striving for performance and elevation.
They were reaching for the sky.
The higher they built, the more it showed off their knowledge to anyone arriving in the city,
because they would see this stunning building and be impressed.
This quest for verticality also included a quest for light,
which had to be allowed into these sacred buildings.
But this quest for light posed a fundamental problem for the masons.
Previously, they only knew how to build barrel vaults and ribbed vaults,
which were thick and heavy and weighed heavily on the walls below.
There weren't many openings to let the light in,
because they would weaken the structure and put it at risk of collapse.
Groin vaulting solved that issue by shifting the load onto the groins,
which redirect the force onto the pillars on the sides.
Vaults became thinner and lighter.
Using this technique, they could now open up the walls more
to let light in without weakening the structure.
This made it possible for perhaps the first time in the history of architecture
to eliminate the need for thick, sturdy walls
in favor of having a strong framework instead.
That's what made Gothic architecture so modern.
Groin vaulting revolutionized construction in the Middle Ages
and soon spread all across the continent.
That's why it's found in so many different forms,
both in the massive architecture of keeps like the one at Guédelon
and in the light, airy vaults of cathedrals,
where they're covered with a thin layer of stone.
These innovations might give the impression that the Middle Ages
were all about stone, but wood continued to play a major role,
as can be seen in the ceiling of the cathedral in Bourges.
In this race to build the biggest structure,
carpentry underwent unprecedented changes brought about by master carpenters
at the peak of their art.
The unknown dimensions they were dealing with led to constraints
in terms of weight, logistics, the complexity of the structure
and the management of building teams.
One of the biggest challenges was where to get enough wood.
In the early 12th century,
all the trees that could be used for cross beams that were 40 by 40
or even 50 by 50 had been cut down bit by bit.
And the demand for construction was sky high.
Wood was needed for castles, churches, courthouses and other structures.
There were no trees left that were big enough to build with.
You can see it when you look at the roof of the cathedral.
Most of the pieces of wood are no wider than 20 to 30 centimeters,
which is much less than what had been used in the past.
Medieval forests were the result of very dense regrowth,
resulting in trees that were not very wide, but very tall,
with very few branches at the crown.
There were trunks that were up to 20 meters long without any branches.
What did they do?
How could they use those pieces of wood with a smaller diameter
by inventing vaulted roofs?
Until then, trusses, the basic elements of any roof,
were made up of wide pieces of wood spaced out every three to four meters.
They had purlins running between them, to which a series of rafters
were attached, providing a base for the roof covering.
Vaulted ceilings don't need purlins because they have numerous
smaller rafters that act on their own.
They alternate between primary rafters, which have a cross beam
and secondary rafters with no cross beam.
This structure is well suited to cathedrals
because it distributes the weight of the roof much more evenly
across the walls than a regular truss design,
which creates points of compression, resulting in fragility.
The steeper angle also results in more vertical force on the walls,
which means they can be thinner.
This is the technique that was used to build the Lord of Guédelon's main keep.
In addition to its elegant shape, it's also very effective
because it uses the wood's natural properties to the fullest.
In this case, each vertical piece is a whole tree,
the heart of which is kept at the center of the beam.
Using thinner beams and using a whole tree for each beam
meant that whether they were building a castle or a cathedral,
it would be much stronger than if they had taken one large oak tree
and split it into four, which requires cutting through the fibers
and therefore weakening the wood.
This technique is one of the reasons that so many roofs
of large medieval monuments have survived over the centuries.
The longevity of these constructions is also thanks in part
to the care that was taken when squaring the wood.
This phase consists of removing the fragile top layer
to obtain a rectangular beam.
In the Middle Ages, it was done using an axe rather than a saw.
The best way to cut wood is using an axe
because it closes off the channels in the wood,
which prevents bacteria or fungi from getting in.
When you use a saw, it creates a tear that opens up the wood
and the surface is like a sponge.
It soaks up everything, water, fungi and bacteria.
This squaring must be done within two years of when the tree was cut,
when the wood hasn't fully dried yet and is still easier to work with.
After the first phase, which is done using an axe,
the job is finished using a more precise tool known as a doloire.
Axes are symmetrical, whereas doloire are asymmetrical.
They have a beveled edge on one side and a flat face on the other side,
which means that when you're working, you can leave your hand
in between the wood and the tool without hurting yourself.
The flat face also helps you get a better finish
and leave the surface in better shape.
A carpenter can square all four faces of a one meter
length of rafter in an hour.
It took two workers three months to complete the ceiling of the Lord's
residence. Medieval carpenters were in close contact with the forest
and made optimal use of everything it offered them.
Curved trees were not rejected.
In fact, they were even sought out for certain pieces.
We need curved pieces.
When you're building a truss, the A created by the frame can act as bracing.
It's much stronger if you have a tree that's curved into the shape you need.
It's mechanically much stronger to do that
than to choose a much larger tree and cut through the fibers,
decreasing its mechanical strength and get a curved piece
that would change shape over time.
The carpenters were responsible for preparing all manner of pieces.
But what happened when it came time to assemble
the extremely complicated roof of a cathedral, for example?
The cathedral can have as many as 150 or 200 trusses.
So you had to know what you were doing over time.
The marking system became more and more detailed
so they could quickly distinguish between the various pieces of wood
used to construct the ceiling.
Since building teams moved from site to site,
a system with as many as several thousand symbols
quickly spread across the country in Guédelon's time.
By the first half of the 13th and middle of the 14th century,
they had reached a greater level of rationalization and intelligence
in the building of roofs.
Vaulted ceilings exist in different forms in all kinds of buildings,
from houses to churches to castles.
They appear at Guédelon in the Lord's residence,
as is apparent in the alternating principal and secondary trusses.
When this roof was built,
it was the first time anything like it had been reproduced
using methods from the time.
It was an incredible technical challenge for the carpenters.
There are no treatises on how to build a vaulted ceiling.
That expertise disappeared starting in the 16th century.
So the carpenters of Guédelon went to see the ceilings of other cathedrals
and churches from the 12th and 13th centuries
to try to understand how they were built.
It was kind of like looking for clues in an investigation.
Thanks to their research,
they were able to come up with a design for the roof.
Like in the Middle Ages,
it would have 43 primary and secondary trusses,
all cut from oak, for a total number of 126 building blocks.
But how were they to install such heavy pieces
eight meters from the ground?
You can't lift an assembled truss up from the ground.
You have to use the squirrel cage to raise each piece one by one.
The carpenters of Guédelon designed a work platform at the height
where the trusses had to be put into place.
The pieces were built one by one, then assembled in place.
Then the trusses were lifted using a pulley and put into their final locations.
The work platform was extended as the trusses were pulled into place.
But as they approached the gables,
it became clear that the system wouldn't work much longer due to the lack of space.
The carpenters had to come up with a new method.
They raised all the remaining trusses side by side,
then installed a cross beam to slide them into position.
This purely practical solution turned out to be entirely realistic in historical terms.
Just a few weeks later,
we were surprised to come across an illumination showing the exact same system.
We came full circle and it turns out our intuition was right.
Experimental archaeology is an ongoing dialogue
between trials in the field and traces of the past.
Back in Bourges, we learn more about the building method used to construct
the giant roof, which is so much larger in size than that of Guédelon.
Now we realize what a challenge it must have been to build the roofs of the cathedrals.
The ceilings of the cathedral in Bourges are 40 meters high
and they had to deal with the wind, too, all while assembling thousands of pieces.
They couldn't have raised the whole truss from the ground
because that would take a lifting machine that was something like 20 meters high.
That doesn't seem very likely to me.
So I think they must have had a temporary working platform.
You need a platform.
You can't assemble a ceiling in midair.
Long before Guédelon, the carpenters working on the cathedrals
probably used the same methods and came up with numerous
ingenious techniques in their race to the skies.
The vaulted ceilings of cathedrals are a veritable technological feat.
Both in terms of their design and in their production and assembly.
An improved understanding of the building sites of the Middle Ages
doesn't only hold fascination for experts with an eye to the past.
On the contrary, these techniques are still relevant today.
The fire at Notre Dame, which reduced one of the greatest masterpieces
of French carpentry to ashes, shows just how precious this knowledge is.
The people building the roof at Notre Dame learned at Guédelon,
which is proof of the importance of experimental archaeology.
The choice that was made for the restoration of the rooftop of Notre Dame
was to go back to working with axes and Delaware.
Rebuilding a rooftop from the 12th and 13th centuries
like that of Notre Dame is possible.
The carpenters of Guédelon have proven it themselves.
It will still be a few more years before the workers of Guédelon
have finished the towers and castle walls.
But their experience has already convinced them of one thing.
Eight hundred years after the many famous castles and churches
of the Middle Ages were erected.
Nothing today compares to the incredible expertise
of the medieval builders.