How to Suture - The Interupted Suture - Clinical Skills - Dr Gill
Dr James Gill
407 followers
How to Suture - The Interrupted Suture - Clinical Skills - Dr Gill
One of the core things of being a doctor is being able to help people. Suturing is probably the clearest demonstration of that. A person comes in with a wound, you clean it, check for additional damage, then suture it - essentially fix the patient, and send them home.
In this video, we'll look over the most basic suture used, that of the interrupted suture, putting in single sutures, spaced across a wound
#DrGill #ClinicalSkills #sutures
AI Generated·May contain errors
Hello and welcome back to the channel. My name is Dr James Gill and you've joined me for
a session on the interrupted suture. This was perhaps my favouritest day at medical school
because I knew that I'd made it. I was learning a physical skill, not where I'd be able to diagnose
a patient but where I'd actually be able to use my hands to help them. So with that in mind,
let's go through how we perform the interrupted suture with some kit that I've got over here and
crucially pay attention to the things that are required in terms of the forceps etc because
you can buy these relatively cheaply online and you don't need artificial skin to practice at
home. You can do that on a simple banana. With that in mind, let's grab some kit and start
suturing. When we're actually looking at the suture we're going to use, one of the questions
we want to ask is what is the size of the suture we're using? With 1.0 here being the largest,
all the way up to 3.0 and that might indicate the area that we're going to use. So for example,
1.0 we may use over joints and 3.0 is going to be very fine work, maybe towards the face for
example. Then we want to think what is the material? Is it vical? So is this going to be
absorbable and can therefore be used internally or externally as well for that matter. Then we've
got mersilk, so this is going to be very resistant and then finally we've got another form of
ethlon vical but this time it's PDS and they highlight on them that again this is a monofilament
but absorbable suture. So the idea being that we have something very fine that doesn't need to be
removed. By comparison we've got something very thick which doesn't need to be removed and then
we've got medium thickness but this is mersilk so this is braided and it's very strong but does
have to be removed. We can also see on the packets the nature of the needle. So here we've got a
diamond shape that's suggesting we have a diamond shaped needle and thus the cutting point is on the
bottom. By comparison for something that we may be using internally we've got a circular needle.
These are going to determine where in the body we're using these and more importantly why we're
going to choose that particular area. So for example I wouldn't choose a cutting needle if I
was worried about damaging surrounding structures. That would much be the case for a circular needle
like so. So in terms of using the suture I have the needle shaft held at approximately two-thirds
of the way along. I'm getting the raptus forceps and I'm elevating the edge that I'm going to
penetrate and the needle is coming in at 90 degrees about five millimetres from the wound edge.
If it was a large wound I could pull through but here I'm not going to do that and I'm using the
forceps to allow me to pierce the skin on the opposite side. Coming up again about five
millimetres across. Now I can release and grasp the blunt aspect of the needle making sure that
I am not anywhere near the cutting edge and potentially stabilise with the raptus forceps
to allow me to pull through. At this point I can take my dominant hand, bring the forceps through,
I can do a single throw and then one pull if I'm doing a flat suture. In terms of doing the throw
we'll do one, two throws for a surgical knot and then I will grasp the trailing end and bring that
through. Now we don't want to tighten this too much and we want to make sure that we're not
knotting this area yet so that we don't end up having a hitch instead and I'm going to do the
same again. One way and then through and I want to make sure that the knot is towards the edge
of the wound rather than towards the middle because it could be a route into which infection
could go. I'm then going to come in and just trim the sutures at approximately one centimetre.
So I suppose the other question once we've put the suture in is how do we remove it and that's done
with a suture cutter. So we carefully remove the suture cutter and we can see that it is a
blade with the blade on the inside. That allows us a nice safe curved aspect. So once the suture's
in how do we remove it? That's with a suture cutter which as you can see here is a curved blade.
So we obviously open up the packet and the end that is coming forth is quite safe. We pull that
out and we can see that we've got a curved blade. This means there's no risk to the patient from one
side of the cutter. So it allows us to get in underneath the sutures and then pull them out
nice and straightforward. We're also going to be using forceps to grasp the suture allow us to
rise it up and then come in underneath the suture cutter and sever the suture pulling it out from
the knot. And obviously when we're at the other side of the spectrum we want to be able to remove
the sutures. So we're going to take our suture removal blade. So in my dominant hand I've got
the tweezers and I've got the suture removal tool in my non-dominant hand. I'm going to try to pick
up the suture and I'm going to come pulling up away from the patient. At which point I'm going
to put the suture removal tool down and come back in to grip the knot and that should allow me to
pull out the suture and I can then discard it. Well I hope that was a useful video. If you've
got any questions please put them down in the comments below and if you could help me out it
would be very useful if you consider liking and subscribing to the channel. Take care and we'll
see you in the next one. Cheerio.
