How to: Clean Your AK-74 & AK-47 Rifle After Shooting Corrosive Ammo

Uniform & Arms
3 followers
2 Video Views·Mar 9, 2026
Lots of ways to do it but they all involve this:
1. Rinse salts out with water
2. Dry
3. Clean/lubricate as normal
4. Inspect the rifle 2-5 days after to ensure there is no rust.
Alright guys, one of the questions I get a lot when discussing the AK-74 platform and
basically anything that fires the 5.45 7N6 is how do you clean your guns after you shoot
corrosive ammo.
Well that's what this video is for.
Keep in mind guys, I live in the humid southeast where it's very hot, very humid, rust is a
legitimate problem.
So I go a little bit overboard, but right now I'm going to show you how I do it.
There's other ways to do it, but the keys are water and then cleaning afterwards.
Rinse those salts out, those corrosive salts out of your gun and then clean as normal.
But we'll show you how I do it on my gun and that'll be it.
So for me the cleaning starts right at the range.
I like to go ahead and spray mine down.
This right here is a solution of one part ballast oil, one part water.
Again though, the key is the water.
But I use the ballast oil because it also has emulsifying properties which help with
this kind of stuff.
But let's go ahead and spray it on the brake real quick, try to get those salts breaking
down.
Just let that run off.
I go ahead and take the rear cover off and then take the bolt carrier out and the bolt.
Spray that down real good.
Try to get those salts going, get those off there because they do like to accumulate there
on the bolt, the bolt carrier.
Then also the keys, a couple keys there guys are getting out of that gas tube.
So I just spray right down in there, let it go out and then also in the chamber, a little
bit in the receiver.
Get it all good and wet because again, the key guys is that water.
So this is what I do here at the range.
I'll show you what happens when I get home next.
Alright, so when I get home, what I do is I just take the rifle apart.
To disassemble, I take the bolt carrier down, put that in a bucket full of hot, you can
see this is hot, just dish soap water, brake, put that in there, top cover, put it in there,
the bolt, put that in there, the gas tube, throw that in there and then the spring.
Again, that's just hot water with a little bit of dish soap mixed in and then for the
rifle, I once again will take that Ballistol solution that I had earlier out there at
the range and don't worry guys, this is not pink, don't let it fool you, it's actually
tactical red, I promise, that's what I tell myself anyway.
But spray out just the chamber, get in there in that gas tube again and just a little bit
around the muzzle and that's it.
At this point, all I'm going to do is I'm just going to take these parts that are soaking
here in water, I'm going to leave them in there for maybe 3-4 minutes, shake them off,
make sure all those corrosive salts get dissolved in there, give them a minute and then after
that, all I'm going to do from here on out is dry it off with some paper towels and clean
as normal.
Finished product, a nice, clean, properly lubricated AK-74 variant.
But one thing I wanted to clarify earlier, I said in the video, I said 1 to 1 Ballistol
water mix, I actually use 1 to 5 and I know guys that use 1 to 10 will probably be even
higher than that.
Because the key that really matters, like I said earlier, is the water.
If you're using Windex, that's fine, it's not going to hurt anything, but what's actually
dissolving those salts is the water in there, it's not the ammonia.
So I use the Ballistol though because it helps bring the water off the surface of the guns
once it dissolves those salts, so I like that.
But if you guys have access to an air compressor, just go ahead and use water and then blow
dry it out, but this here is for people that don't have that because I don't have an air
compressor where I live, unfortunately, because I move a lot and I just can't haul that around.
But if you do, use that method, much quicker, much more efficient.
But as you can see, this wasn't too bad and to be able to shoot 7N6 ammo that's so much
cheaper than commercially made ammo, to me it's worth it.
More shooting equals more fun and equals more proficiency as far as I'm concerned.
So as always guys, if you have any questions on this or any of my other videos, feel free
to let me know, I'll do my best to answer.
Thanks for watching, thanks for subscribing, and we'll see you in the next video.
Alright, thanks.
