How to Paint Realistic Arctic Seals Step by Step Watercolor Tutorial

Classical Kids Arts
76 followers
1 Video View·Mar 8, 2026
Comments are disabled for this video.
Hello and welcome back to my channel. In today's video I'm showing you guys how
I painted this mother and baby seal using just
four paint colors. I'm going to break this one down into five simple sections.
Masking fluid, base washes, painting the baby seal,
painting the mother seal, and snow and background. Let's talk really quick about
supplies. For this painting I'm using Baohong
Academy 140 pound cold press cotton paper
size 7 by 10 inches. You can get a block of arches paper in the same size.
I've applied half inch artist tape all around the edges.
I'm using four colors all by Holbein. Sepia,
turquoise blue, Payne's gray, and raw umber.
And at the end I'll be using a little bit of my Winsor & Newton white gouache.
I also have water jars and a towel for controlling how much water is in my
paintbrush. As always you can see a complete list of
my supplies in the description below this video.
To get the sketch onto your watercolor paper you can either freehand sketch it
or use a tracing method such as transfer paper.
Quick tips about the sketch. No matter which method you use
only draw enough information so you can start painting.
Be careful to make sure your pencil lines are not too dark
and don't press too hard with your pencil or this will leave indentations
in your watercolor paper where paint can collect and pool.
The first step is to use masking fluid to paint on the largest dots of snow.
Masking fluid is one of my favorite tools for preserving the pure white of
the paper because it allows me to paint freely
all around the mask areas. I apply the masking fluid somewhat
sparingly on this one, covering only the key areas where the
snowfall is heaviest, like on the tops of the heads and a
couple extra dots here and there on the bodies.
I also apply a heavy layer of masking fluid along the foreground
where the snow comes in front of the animals. If you don't have masking fluid
you can also use a wax crayon sharpened to a fine point to preserve the dots of
white snow, or you can skip this step altogether
and use white opaque gouache or acrylic paint at the end.
The next step is to get some color down. In my reference photo there's a lot of
complex detail on the mother's seal's back
where snow is overlapping her mottled gray fur.
To simplify this I'm wetting the paper by spraying clean water on the top
portion of the paper. When you use this method to wet your
paper you get some areas that are very wet
and some tiny sections that remain dry. I use my Princeton deerfoot brush with a
to drop in some blotches of gray along the mother's back.
Where the paper is wet the paint spreads out and softens
and where the spray bottle missed the paper we get some interesting harder
edges. This is a great way to relinquish some
control and allow the paint to do its thing,
simplifying this complex area. You do still need to be intentional about where
you put your dark colors and leave some areas untouched to
create the effect of clumps of snow on her back.
For the baby seal my mixture has a little more sepia in it and I'm painting
right up to my pencil lines along the water on the paper to help the
paint soften naturally along that edge. With a darker value I paint a shadow
between the two seals bodies. I use a light gray to paint everything
in, just avoiding the baby's eyes and the
mother's mouth. In the reference photo I see lots of snow
caked on her mouth so I'm leaving that white for now.
In the center of her face I use a light wash of my raw umber for the first time.
I often do two layers of color in this first wash so that I can take advantage
of that wet surface and create soft blending of colors. While
the paper is still wet with that first layer
I take some more dark sepia and Payne's gray and blot in some intense color
where I see the darkest patches of fur on the baby seal.
I'm painting on the first suggestions of fur texture with the feathery bristles of
my deerfoot brush. I also add some dark fur texture to the
mother's seal, moving my brush in the direction I see
the fur growing, out and away from the center of her head.
A word of caution on this wet and wet layer, be careful you don't have too much
water on your brush or it will cause blooms or backwash to
form on your painting. I let that first wash dry completely
before beginning the next step. Now before we go on I wanted to let you
guys know that this tutorial is available in real time.
Just head over to emilyolsonart.com where you can sign up to become a member of my
With your membership you'll have instant access to more than 70 different
watercolor tutorials, all fully narrated with downloadable reference photos and
line drawings. You can also join my private Facebook
group where you'll be able to share your artwork, receive feedback,
and experience a wonderful encouraging community of passionate watercolor
artists just like you. I'll leave a link in the description
below where you can check out all the tutorials that are currently available
and I add more every month. All right let's get back to the video.
I'm now painting the baby seal in with much more detail.
I start by completely re-wetting the entire body with clean water
just avoiding the eyes. Using a size 10 synthetic round brush
I then drop in my darkest mixture of color yet, being careful to avoid those
lighter patches of fur above the eyes and on the underside of the head. For the
fur on the crown of the head and on the seal's back
I spread out the bristles of my brush creating more distinct fur texture
moving my brush in quick short feathering motions in the direction the
fur is growing. Once I have a fuzzy edge along the back
I can fill in the largest area of the body more quickly
using broader brush strokes. I'm switching to my Labenzon
Itty Bitty Orange synthetic brush to paint the details in the eyes.
To make eyes look realistic it's important to leave shiny little
highlights. While I painted the eye the paint on the
head dried and I can then go in with my detail brush and paint the last layer of
detailed fur using my small brush and short quick
side-by-side brush strokes. I also paint the mouth,
the other eye, the w-shaped nose surrounded by dark
coarse fur texture. I add those little black dots in the muzzle and a couple of
dark whiskers and a deeper shadow below the baby's
head. The next step is to paint the mother seal
with the same level of detail that we used for the baby.
Her features are a little bit tricky to define since she is facing us directly
and has much more snow caked on her. Just paint what you see and it will come
out looking right. I paint a wash of light gray all around
her head using a little raw umber in the wash below her mouth. I use more
pure raw umber to paint her mouth and add some water to create lighter
value for the area in the center of her muzzle.
I re-wet her head and drop in some darker grays wet and wet.
I paint some wrinkles in the fur around her neck. These actually help
define that rounded shape of her head against the body.
With the mother seal it's a process of painting a combination of wet blotches
of color and also some more distinct fur texture.
I switch to my small labenzin brush using my darkest combination of sepia
and Payne's gray to create black for the mouth and nose.
If the body is dry enough you can then begin to add more detailed fur
using short quick brush strokes and rich dark paint.
These detailed hairs are growing from the face almost in the shape of sunbeams.
The mother seal's face has distinctive dark patches of gray skin around the
eyes almost shaped like goggles. I use some
Payne's gray slightly watered down to paint these shapes blending the gray
in the center of the head into the fur using quick upward moving
brush strokes. This helps the patches of skin and the
fur feel connected. With those initial colors on I can go
back in with my dark black mixture and paint the closed eyes,
the dark colors on the nose, and more fuzzy fur texture.
For her mouth I use my raw umber and I'm playing up her smile a little bit
more than what I'm seeing in the reference photo.
I want her to look completely content and happy next to her sweet baby.
I have to be strategic about any marks I put down around her mouth.
I want it to look like clumps of snow not a second mouth her chin
so I make these marks more separated and a little lighter in value.
I paint on the dots and dark whiskers and add a light wash of gray on her chin.
I add a few last whiskers and some more fur in areas that looked
just too bland. All of these little details really pull the painting together
and make the seals look realistic. The last step is to paint the background
and add a little more snow. I use clean water to wet the background
and in case you're wondering why I had turquoise blue on my palette
I'm finally using it here. I drop in some turquoise blue wet and wet
just being very sparing with this color. This is just creating a soft hint of
cool winter blue. I don't want it to be too vibrant or it might distract from
the seals. Once that's dry I completely remove the masking fluid
and I mix a little bit of water into the gouache that's on my palette
so that I have a nice creamy consistency in my brush and then I paint on a few
more specific bits of snow. For a finer dusting of snow effects I
gently tap my brush over the areas where I want it.
Our little seals look like they're just cuddling close and enjoying the fresh
falling snow. If you found this video helpful please hit that like button
and leave me a comment below and subscribe if you're new here. Check out
these other videos on painting realistic animals and I'll see you
there!
